Abstract:The structure of turbulent flow over non-flat surfaces is a topic of major interest in practical applications in both engineering and geophysical settings. A lot of work has been done in the fully rough regime at high Reynolds numbers where the effect on the outer layer turbulence structure and the resulting friction drag is well documented. It turns out that surface topology plays a significant role on the flow drag especially in the transitional roughness regime and therefore, is hard to characterize. Survey of literature shows that roughness function depends on the interaction of roughness height, flow Reynolds number, and topology shape. In addition, if the surface topology contains large enough scales then it can impact the outer layer dynamics and in turn modulate the total frictional force. Therefore, it is important to understand the mechanisms underlying drag increase from systematically varied surface undulations in order to better interpret quantifications based on mean statistics such as roughness function. In this study, we explore the mechanisms that modulate the turbulence structure over a two-dimensional (2D) sinusoidal wavy surface with a fixed amplitude, but varying slopes that are sufficiently small to generate only intermittent flow separation. To accomplish this, we perform a set of highly resolved direct numerical simulations (DNS) to model the turbulent flow between two infinitely wide 2D wavy plates at a friction Reynolds number, R e τ = 180 , which represents modest scale separation. We pursue two different but related flavors of analysis. The first one adopts a roughness characterization flavor of such wavy surfaces. The second one focuses on understanding the nonequilibrium near-surface turbulence structure and their impact on roughness characterization. Analysis of the different statistical quantifications show strong dependence on wave slope for the roughness function indicating drag increase due to enhanced turbulent stresses resulting from increased production of vertical velocity variance from the surface undulations.

Analysis of Evaporation Data under Roughness-Induced Wind Flow

A Study on Flow and Heat Transfer Characteristics for Saturated Falling-Film Evaporation of Liquid Oxygen in a Vertical Channel

Evaporation from Wavy Porous Surfaces into Turbulent Airflows

Study of the effect of wind speed on evaporation from soil through integrated modeling of the atmospheric boundary layer and shallow subsurface

Analysis of an Evaporating Sessile Droplet on a Non-Wetted Surface

An Improved Approach for Estimating Pan Evaporation Using a New Aerodynamic Mechanism Model

The Interaction Between Droplet Evaporation and Turbulence with Interface-Resolved Direct Numerical Simulation

Evaporation of Ventilated Water Droplet: Connection Between Heat and Mass Transfer

An experimental investigation on the effects of surface gravity waves on the water evaporation rate in different air flow regimes

Air-water interface boundary condition for the numerical evaporation rate prediction of a horizontal water span under different convection regimes

Near-bed velocity and shear stress of open-channel flow over surface roughness

Friction factor decomposition for rough-wall flows: theoretical background and application to open-channel flows

Statistical Structure and Deviations from Equilibrium in Wavy Channel Turbulence

Experimental Assessment of Hypersonic Convective Heat Transfer Augmentation due to Surface Roughness

Validating coupled flow theory for bare‐soil evaporation under different boundary conditions

Influence of surface wettability on transport mechanisms governing water droplet evaporation

The wind-shade roughness model for turbulent wall-bounded flows

Evaporation from porous surfaces into turbulent airflows: Coupling eddy characteristics with pore scale vapor diffusion

Effects of Non-Darcian and Inlet Conditions on the Forced Convection Along a Vertical Plate With Film Evaporation

Variation in Wind Velocity over Water

Development and validation of an evaporation duct model. Part I: Model establishment and sensitivity experiments