Centrifuge modeling of heavy masses, placed on the ground, as a vibration attenuation countermeasure for surface trains

Mohammad Hassan Baziar,Parisa Shahbazan

DOI: https://doi.org/10.1016/j.trgeo.2024.101196

IF: 4.938

2024-02-03

Transportation Geotechnics

Abstract:Recent studies have shown that heavy masses, sited on the ground surface, can reduce vibrations induced by surface sources. In this study, six centrifuge model tests with seven different frequencies (42 centrifuge tests in total) were conducted, for the first time, to investigate the mitigation performance of heavy masses for train-induced ground vibrations. Significant vibration reductions were observed for the tested scenarios, indicating the remarkable mitigation potential of this technique. Centrifuge test results showed that a single row of concrete blocks next to the vibration source can reduce vibration levels by 13.2%-52.0%, depending on the exciting frequencies. However, the proficiency of the mentioned method at high frequencies requires the use of very wide blocks, which may not be practical. To address this issue, the mitigation effect of double rows of concrete masses with various configurations was also studied. It was found that using two rows of concrete blocks between the source and receiver points can considerably enhance the system efficiency for the entire tested frequency range, resulting in vibration reductions of up to about 39% more than a single row of concrete blocks. The largest attenuation levels, up to 71.6% reduction, and the widest attenuated frequency band were achieved using double continuous concrete walls.

engineering, civil, geological