An Overview of New Developments in Shale Gas: Induced Seismicity Aspect

N. S. Zadeh,S. Talebi

DOI: https://doi.org/10.5772/INTECHOPEN.76542

2018-08-29

Abstract:New advances in technology such as advances in horizontal drilling, the use of multi- well drilling pads, and multi-stage hydraulic fracturing allow for the economic consid-eration of recovering formerly uneconomic, yet proven resources. Hydraulic fracturing perturbs the local stress field and causes slip/shearing in naturally fractured shale forma tions. Monitoring this process using microseismic techniques provides a valuable tool helping to detect the progression of the treatment and understand the efficacy of the operation. This article provides basic definitions regarding shale gas and development of shale gas reservoirs along with results of many new developments in the field of moni toring induced seismicity associated with hydraulic fracturing operations and character- izing of the efficacy of such operations. coupled fluid-flow and geomechanical modeling of fault activation where a horizontal injection well intersects a steeply dipping fault. A three-hour hydraulic fracture operation was modeled, and the results indicated that shale-gas hydraulic fracturing along faults would not likely induce seismic events that could be felt on ground surface. The results indicated several small microseismic events, as well as aseismic deforma-tions along with the fracture propagation. The magnitudes of the created events ranged from −2.0 to 0.5, excluding one case regarding a very brittle fault with low residual shear strength for which the magnitude was 2.3, an event that would possibly go unrecognized or might be felt by humans at its epicenter. A dependency on injection depth and fault dip was found after conducting sensitivity analyses on various parameters such as injection depth, fault dip, and slip-weakening model parameters. That dependency could be attributed to the variation of the shear stress on the fault plane and the variation of stress during the reactivation process. The plastic zone, according to the results, expanded up to 200 m from the injection well at the end of the hydraulic fracturing operation.

Engineering,Geology,Environmental Science