Abstract:Micrometer-sized single crystal cathodes have garnered significant interest as promising cathode materials for lithium-ion batteries due to their ability to reduce surface area exposure to electrolytes and suppress side reactions, thereby enhancing electrochemical performance. One of the challenging issues with single crystal cathode materials is synthesizing monodisperse and discrete single crystals rather than agglomerated quasi-single crystals. However, conventional solid-state synthesis of most single crystals results in severe agglomeration and cation mixing, as it requires high temperatures to promote particle growth to several micrometers. In this study, a novel morphology-conserving reaction strategy that employs octahedron single crystal intermediates is introduced to synthesize discrete, monodisperse LiNi0.97Co0.02Mn0.01O2 octahedron single crystals. This scalable and cost-effective approach involves using rock-salt Ni0.97Co0.02Mn0.01O1+x octahedrons as single crystal intermediates, which are transformed in unreactive unary lithium salt melts (LiCl and Li2SO4) from spherical Ni0.97Co0.02Mn0.01(OH)2 obtained via coprecipitation. These intermediates are then subjected to a stoichiometric amount of Li precursor in a conventional solid-state synthesis to produce layered LiNi0.97Co0.02Mn0.01O2. This process is a morphology-conserving lithiation reaction, leading to the formation of discrete and monodisperse LiNi0.97Co0.02Mn0.01O2 octahedron single crystals. The resultant LiNi0.97Co0.02Mn0.01O2 single crystals demonstrate superior electrochemical performance, including stable capacity retention over 150 cycles, which surpasses that of typical quasi-single crystals produced through conventional methods. This is attributed to negligible crack formation during cycling, in contrast to significant cracking observed in conventional quasi-single crystals. This implies that single-crystal forms are preferred over agglomerated quasi-single crystal forms for enhancing cycle performance. These findings provide valuable insights into the industrial synthesis of discrete and monodisperse ultrahigh-nickel oxide cathode materials.

Synthesis of Monodisperse and Discrete Ultra-High Nickel LiNi 0.97 Co 0.02 Mn 0.01 O 2 Octahedral Single Crystals via Single Crystal Intermediates for Li-Ion Batteries

Synthesis of Monodisperse and Discrete Ultra-High Nickel LiNi0.97Co0.02Mn0.01O2 Octahedral Single Crystals via Single Crystal Intermediates for Li-Ion Batteries

Lithium‐Ion Batteries: Radially Oriented Single‐Crystal Primary Nanosheets Enable Ultrahigh Rate and Cycling Properties of LiNi 0.8 Co 0.1 Mn 0.1 O 2 Cathode Material for Lithium‐Ion Batteries (Adv. Energy Mater. 15/2019)

Radially Oriented Single‐Crystal Primary Nanosheets Enable Ultrahigh Rate and Cycling Properties of LiNi0.8Co0.1Mn0.1O2 Cathode Material for Lithium‐Ion Batteries

Ton-scale preparation of single-crystal Ni-rich ternary cathode materials for high-performance lithium ion batteries

Controlling the Microstructure of Cobalt-Free, High-Nickel Cathode Materials with Dopant Solubility for Lithium-Ion Batteries

Insight of Synthesis of Single Crystal Ni‐Rich LiNi1−x−yCoxMnyO2 Cathodes

Synthesis of Single-Crystal LiNi 0.7 Co 0.15 Mn 0.15 O 2 Materials for Li-Ion Batteries by a Sol–Gel Method

Controlled Synthesis of Single-Crystalline Ni-Rich Cathodes for High-Performance Lithium-Ion Batteries

Synthesis of single-crystal LiNi0.8Co0.1Mn0.1O2 materials for Li-ion batteries by microfluidic technology

Highly‐Dispersed Single‐Crystalline Ni‐Rich Cathodes with Low Li/O Loss for High‐Power and Long‐Life Li‐Ion Batteries

Highly Dispersed Micrometer Nickel-Rich Single-Crystal Construction: Benefits of Supercritical Reconstruction during Hydrothermal Synthesis

Simultaneous Single Crystal Growth and Segregation of Ni-Rich Cathode Enabled by Nanoscale Phase Separation for Advanced Lithium-Ion Batteries

Pore-Free Single-Crystalline Particles for Durable Na-Ion Battery Cathodes

One-Step Synthesis of a Single-Crystal LiNi 0.83 Co 0.11 Mn 0.06 O 2 Cathode with Excellent Electrochemical Properties by Ti 4+ Doping and LiTi 2 O 4 In Situ Chemical Coating Using a Novel Variable Temperature Sintering Process

A short process and low-cost preparation of single crystal LiNi0.6Co0.2Mn0.2O2 cathode for lithium-ion batteries

Synthesis of high-performance single-crystal LiNi0.8Co0.1Mn0.1O2 cathode materials by controlling solution super-saturation

Synthesis of Full Concentration Gradient Cathode Studied by High Energy X-ray Diffraction

A Molten-Salt Method to Synthesize Ultrahigh-Nickel Single-Crystalline LiNi0.92 Co0.06 Mn0.02 O2 with Superior Electrochemical Performance as Cathode Material for Lithium-Ion Batteries.

Quantification of Single Crystallinity in Single Crystal Cathodes for Lithium-Ion Batteries