Abstract:This study presents experimental and numerical investigations on the effects of composite ply angle, thickness and number of layers on energy absorption behavior of adhesively bonded carbon fiber-reinforced plastic/aluminum hybrid structure under quasi-static axial loading. This paper aims to use the advantages of adhesive bonding for the local strengthening of a square shaped aluminum energy absorber by composite and as a result achieving desirable energy absorption behavior prior to failure in the connection and without heterogeneous deformation of the structure while reducing the weight of the structure and usage of material and at the same time obtaining favorable results compared to the traditional ways like reinforcing the aluminum structure with composite globally. For this purpose, two models were made and analyzed; one reinforced with four L-shaped composites adhesively bonded using Araldite 2015 to four outside corners of the aluminum square and the other reinforced locally to four corners from within the square. Finite element model was developed for analysis of these hybrid structures. Five different ply angles for composite and multiple number of composite layers varied from 2 to 8 layers under the same and different thicknesses were investigated. Moreover an alpha factor has been determined to measure the importance of local reinforement of the square shape aluminum energy absorber by L-shaped composites. The results showed that compared to aluminum and aluminum with global composite reinforcement energy absorbers, due to the adhesive connection between aluminum and composite in the locally reinforced CFRP/aluminum specimen, the composite had better energy absorption by following the collapse pattern of aluminum and creating a continuous collapse and failure modes. The results indicated good coordination and agreement between the simulated models and the experimental tests. The findings from this experiment demonstrates significant potential for local reinforcement of structures employing adhesives. Utilizing such connections and the ability to strengthen specific areas based on arbitrary geometry and strengthening location could offer substantial opportunities in constructing lightweight structures with high energy absorption across diverse applications.

Hybrid aluminum/composite specimens of the thin–walled square cross–section under flattening experiments

Influence of Fiber Cutting at the Composite Grid Intersection on the Compressive Performance of Laminate

Hybrid Metal/Composite Structures Under Quasi-static Axial Compression Loads: A Comparative Study

Experimental and numerical studies on bending characteristics of woven CFRP reinforced aluminum thin-walled automotive structures

Experimental investigation into the bending energy absorption of hybrid aluminum/high strength and mild steel thin-walled sections joined by clinching

Local reinforcement of adhesively bonded square shape aluminum energy absorber with CFRP under quasi-static axial loading: an experimental and numerical study

Multi-response optimization of crashworthy performance of perforated thin walled tubes

Experimental and numerical investigation on the crashworthiness performance of double hat‐section Al‐CFRP beam subjected to quasi‐static bending test

Energy absorption of metal, composite and metal/composite hybrid structures under oblique crushing loading

Numerical simulation and multi-objective optimization of thin-walled aluminum/carbon fiber reinforced plastic hybrid tubes under axial crushing

Axial crushing of hybrid square sandwich composite vehicle hollow bodyshells with reinforced core: Experimental

Crash-worthiness analysis of hollow hybrid structural tube by aluminum with basalt-bamboo hybrid fiber laminates by roll wrapping method

Effect of fibre hybridization and stacking sequence on the low velocity impact response of flax/basalt/aluminum composite-metal joints

Experimental & numerical study on hybrid aluminium/GFRP thin-walled column under quasi-static axial loading

Hybridization effect on energy absorption capacity of composite crash boxes

Crashworthiness analysis and design optimization of square aluminum/CFRP hybrid structures under quasi-static axial loading

Optimizing the crashworthy behaviors of hybrid composite structures through Taguchi approach

Enhancing Impact Energy Absorption, Flexural and Crash Performance Properties of Automotive Composite Laminates by Adjusting the Stacking Sequences Layup

A comparative study on the energy absorption mechanism of aluminum/CFRP hybrid beams under quasi-static and dynamic bending

Experimental and numerical studies on the energy absorption characteristics of Al/CFRP corrugated web beams

Fabricating sandwich composite tubes using a new thermal expansion technique: Materials preparation and energy absorption characteristics