Abstract:Being one of the most toxic pollutants commonly present in wastewater as soluble hexavalent chromium (Cr(VI)) specie, its concomitant adsorption and chemical reduction to relatively insoluble and less poisonous Cr(III) would be an effective strategy for remediation of Cr-polluted water. As such, a novel MXene-polyelectrolyte nanocomposite was typically synthesized for enhanced Cr(VI) removal. In detail, we applied polyethylenimine (PEI) to modify the Ti3C2Tx surfaces and synthesized Ti3C2Tx/PEI nanocomposites. The as-prepared composites were characterized by various methods such as SEM-EDX, N2 sorption-desorption isotherm, XRD, FTIR, and XPS. Further, the Ti3C2Tx/PEI was used to adsorb Cr(VI) for clarifying the kinetics, isotherms, and the effects of solution pH and coexisting ions on Cr(VI) removal by batch experiments. Our results show that coating of Ti3C2Tx nanosheets with PEI regulates surface charge of the as-synthesized adsorbent and creates it with a three-dimensional network, allowing the fast electrostatic adsorption of Cr(VI) anions to positively charged surface over wide pH range of 1–10 and promoting to achieve improved removal capacity maximum up to 186.5 mg/g. The Cr(VI) adsorption data were well fitted by the pseudo-second-order kinetic and Langmuir isotherm models. In addition, Ti3C2Tx/PEI also exhibits excellent selectivity for Cr(VI) anions over competing ones such as NO3 −, Cl−, ClO4 −, and SO4 2−. Time-dependent reaction routes of Ti3C2Tx/PEI nanocomposite toward Cr(VI) was studied by XPS, which confirmed the slow reduction of all sorbed Cr(VI) to Cr(III) in the dozens of hours and final in-situ Cr(III) immobilization, clarifying the sorption-reduction mechanism for Cr(VI) elimination. All these results suggest that Ti3C2Tx/PEI nanocomposite prepared by reported surface-modification approach available for developing other functionalized adsorbents, may be a potential candidate for decontamination of Cr(VI)-polluted wastewater.

MXene@MOF for Synergetic Removal of Cr(VI) by Adsorption and Reduction

Enhanced removal of Cr(VI) by reductive sorption with surface-modified Ti3C2Tx MXene nanocomposites

Chitosan Induced Synthesis of Few-Layer MoS2/Fe-doped Biochar and Its Dual Applications in Cr(VI) Removal

Ultra-fast and ultra-efficient removal of Cr (VI) by the aqueous solutions of monolayer MXene (Ti3C2Tx)

Fe–Ni/MWCNTs Nano-Composites for Hexavalent Chromium Reduction in Aqueous Environment

Cellulose hydrogel coated nanometer zero-valent iron intercalated montmorillonite (CH-MMT-nFe0) for enhanced reductive removal of Cr(VI): Characterization, performance, and mechanisms

The hyper-crosslinked aniline polymer@MOFs hybrid materials reinforced with active ionic sites for efficient and fast Cr(VI) removal

Polyamidoamine dendrimers modified MXene and its high-performance adsorption behavior for Cr(VI)

Green Synthesis of A Novel MXene–CS Composite Applied in Treatment of Cr(VI) Contaminated Aqueous Solution

Photoresponse of Ti3C2Tx MXene promotes its adsorptive-reductive removal of Cr(VI) from water

Synchronously Enhanced Removal Ability and Stability of MXene through Biomimetic Modification

Highly efficient removal and sequestration of Cr(VI) in confined MoS2 interlayer Nanochannels: Performance and mechanism

CTAB-surface-functionalized magnetic MOF@MOF composite adsorbent for Cr(VI) efficient removal from aqueous solution

Well-Dispersed Nanoscale Zero-Valent Iron Supported in Macroporous Silica Foams: Synthesis, Characterization, and Performance in Cr(VI) Removal

Controllable integration of nano zero-valent iron into MOFs with different structures for the purification of hexavalent chromium-contaminated water: Combined insights of scavenging performance and potential mechanism investigations

Enhanced removal of Cr(VI) from aqueous solution by stabilized nanoscale zero valent iron and copper bimetal intercalated montmorillonite

Two-Dimensional Titanium Carbides (Ti3C2Tx) Functionalized by Poly(m-phenylenediamine) for Efficient Adsorption and Reduction of Hexavalent Chromium

Highly efficient nano-Fe/Cu bimetal-loaded mesoporous silica Fe/Cu-MCM-41 for the removal of Cr(VI): Kinetics, mechanism and performance

Recyclable Nanocomposite of Flowerlike MoS2@Hybrid Acid-Doped PANI Immobilized on Porous PAN Nanofibers for the Efficient Removal of Cr(VI)

One-pot eutectic molten salt synthesis of MXene-supported nanoscale zero-valent iron composites for efficient adsorption and reduction of uranium

A Novel Two-Dimensional Accordion-Like Titanium Carbide (mxene) for Adsorption of Cr(VI) from Aqueous Solution