Abstract:A novel Cr (VI) removal material was designed and produced comprising multi-walled carbon nanotubes (MWCNTs) as a support with a high specific surface area and the loaded Fe–Ni bimetallic particles as catalytic reducing agents. Such a design permits the composite particle to perform the adsorption, reduction, and immobilisation of Cr (VI) quickly and efficiently. Due to MWCNTs' physical adsorption, Cr (VI) in solution aggregates in the vicinity of the composite, and Fe rapidly reduces Cr (VI) to Cr (III) catalysed by Ni. The results demonstrated that the Fe–Ni/MWCNTs exhibits an adsorption capacity of 207 mg/g at pH = 6.4 for Cr (VI) and 256 mg/g at pH 4.8, which is about twice those reported for other materials under similar conditions. The formed Cr (III) is solidified to the surface by MWCNTs and remains stable for several months without secondary contamination. The reusability of the composites was proven by retaining at least 90% of the adsorption capacity for five instances of reutilization. Considering the facile synthesis process, low cost of raw material, and reusability of the formed Fe–Ni/MWCNTs, this work shows great potential for industrialisation.
What problem does this paper attempt to address?
The problem that this paper attempts to solve is the pollution problem of hexavalent chromium (Cr (VI)) in the water environment. Specifically, the authors designed and prepared a new type of Cr (VI) -removing material, namely Fe - Ni bimetallic nanocomposite loaded on multi - walled carbon nanotubes (MWCNTs). This material aims to quickly and efficiently remove Cr (VI) in aqueous solutions through physical adsorption, chemical reduction and immobilization.
The following are the specific objectives and background of this study:
1. **Background problems**:
- With the rapid development of industry, the pollution of wastewater, waste gas and solid waste is becoming more and more serious, especially heavy metal pollution, which poses a serious threat to human health.
- Hexavalent chromium (Cr (VI)) is a typical heavy metal pollutant with high toxicity. Its toxicity is about 100 times higher than that of trivalent chromium (Cr (III)), and it is extremely harmful to human health and the environment.
2. **Limitations of existing technologies**:
- Currently, methods for removing Cr (VI) include reduction, ion exchange, adsorption, membrane filtration and electrochemical treatment, etc. Each method has its own advantages and disadvantages, for example:
- The adsorption method can remove Cr (III) and Cr (VI) simultaneously, but has a limited adsorption capacity.
- The ion exchange method is simple and effective, but is easily affected by other ions.
- The membrane filtration method is suitable for large - scale removal of Cr (VI), but has a high cost.
- The electrochemical treatment has a fast reaction speed, but will produce a large amount of sludge.
- The reduction method only requires one step, but is not suitable for drinking water treatment.
3. **Research objectives**:
- Design an efficient Cr (VI) -removing material, combining the advantages of physical adsorption and chemical reduction, in order to improve the removal efficiency.
- Solve the problems encountered in the practical application of existing materials such as zero - valent iron (ZVI) and nano - zero - valent iron (NZVI), such as aging, lack of selectivity and directionality, agglomeration and difficult separation.
- Develop a material with high adsorption capacity, good reusability and low manufacturing cost to realize industrial application.
By loading Fe - Ni bimetallic particles onto MWCNTs, this study aims to develop a new type of nanocomposite that can efficiently remove Cr (VI) in the water environment and reduce it to less toxic Cr (III), thereby preventing secondary pollution. The experimental results show that the adsorption capacity of this material reaches 207 mg/g at pH = 6.4 and 256 mg/g at pH = 4.8, which is significantly higher than other similar materials. In addition, this material also shows good reusability and can still maintain at least 90% of the adsorption capacity after five cycles of use.
In conclusion, the main purpose of this paper is to develop an efficient, economical and reusable Fe - Ni/MWCNTs nanocomposite to solve the problem of Cr (VI) pollution in the water environment.