Abstract:Li metal is considered as the “Holy Grail” of energy storage systems due to its extremely high theoretical specific capacity (3860 mAh g−1), low gravimetric density (0.59 g cm−3), and lowest negative redox potential (−3.040 V vs. standard hydrogen electrode). The bright prospects give rise to worldwide interests in the metallic Li for the next generation energy storage systems, including highly considered rechargeable metallic Li batteries such as Li-O2 and Li-sulfur (Li–S) batteries. However, the formation of Li dendrites induced by inhomogeneous distribution of current density on the Li metal anode and the concentration gradient of Li ions at the electrolyte/electrode interface is a crucial issue that hinders the practical demonstration of high-energy-density metallic Li batteries. A unique nanostructured anode with Li metal distributed in fibrous Li7B6 matrix is proposed as a promising anode to prevent the dendrite growth. The nanostructured anode is with a large specific area, thus rendering a low current density on the Li metal anode. The dendrite growth is effectively inhibited via decreasing the growth velocity of Li deposits and then limiting the final size of deposited Li on the nanostructured matrix, thus leading to the dendrite-free morphology at macroscale. The concentration gradient of Li ions near the anode surface are sharply reduced, because the 3D Li7B6 fibrous structure provides quantities of free space to accommodate electrolyte. To improve the Coulombic efficiency of Li depositing/dissolution, a dual-phase Li metal anode containing polysulfide-induced SEI and nanostructured graphene framework was investigated for Li-S batteries. Free-standing graphene foam provides several promising features as underneath layer for Li anode, including (1) relative larger surface area than 2D substrates to lower the real specific surface current density and the possibility of dendrite growth, (2) interconnected framework to support and recycle dead Li, and (3) good flexibility to sustain the volume fluctuation during repeated incorporation/extraction of Li. The synergy between the LiNO3 and polysulfides provides the feasibility to the formation of robust SEI in an ether-based electrolyte. The efficient in-situ formed SEI-coated graphene structure allows stable Li metal anode with the cycling Coulombic efficiency of ∼97 % with high safety and efficiency performance, which is with a low resistance of 19.65 Ω (29.10 Ω for Cu foil based Li metal anode) and high ion conductivity of 5.42×10-2 mS cm-1 (2.33×10-2 mS cm-1 for Cu foil based Li metal anode). These results indicated that interfacial engineering of nanostructured electrode were a promising strategy to handle the intrinsic problems of Li metal anodes, thus shed a new light toward LMBs, such as Li-S and Li-O2 batteries with high energy density. Reference [1] X. B. Cheng, H. J. Peng, J. Q. Huang, F. Wei, Q. Zhang, Small 2014, 10, 4257 [2] X. B. Cheng, H. J. Peng, J. Q. Huang, R. Zhang, C. Z. Zhao, Q. Zhang, ACS Nano 2015, 9, 6373

Ultra‐Uniform and Functionalized Nano‐Ion Divider for Regulating Ion Distribution toward Dendrite‐Free Lithium Metal Batteries

Controllably regulating ion transport in lithium metal batteries via pore effect of metal–organic framework-based separators

Metal-organic Framework Nanosheets-Guided Uniform Lithium Deposition for Metallic Lithium Batteries

Bifunctional Separators with High Transference Number and Uniform Ion Flux for Dendrite-Free Lithium Metal Batteries

Functional Separators Regulating Ion Transport Enabled by Metal‐Organic Frameworks for Dendrite‐Free Lithium Metal Anodes

An ultrathin Zn-BDC MOF nanosheets functionalized polyacrylonitrile composite separator with anion immobilization and Li+ redistribution for dendrite-free Li metal battery

An Ion‐Management Membrane with Vertically Aligned Uniform Electronegative Nanochannels Toward Dendrite‐Free Lithium Metal Anodes

An Ion Redistributor for Dendrite-Free Lithium Metal Anodes

Metal‐Organic Framework Sandwiching Porous Super‐Engineering Polymeric Membranes as Anionphilic Separators for Dendrite‐free Lithium Metal Batteries

Bifunctional Composite Separator with Redistributor and Anion Absorber for Dendrites-Free and Fast-Charging Lithium Metal Batteries

Uniform lithium deposition regulated by lithiophilic Mo 3 N 2 /MoN heterojunction nanobelts interlayer for stable lithium metal batteries

Tandem Design of Functional Separators for Li Metal Batteries with Long‐Term Stability and High‐Rate Capability

A Simple Metallic Coating on Separator for Lithium Dendrite Suppression

Open-pore MFI zeolite nanosheets modified separator with Li-ion flux regulation for lithium-metal batteries

Lithium Magnesium Silicate Nanoparticles with Unique Cation Acceleration Channels as Li-ion Rectifiers for Stabilizing Li Metal Batteries

Bifunctional composite separator with a solid-state-battery strategy for dendrite-free lithium metal batteries

Regulating Li uniform deposition by lithiophilic interlayer as Li-ion redistributor for highly stable lithium metal batteries

Design of Robust, Lithiophilic, and Flexible Inorganic‐Polymer Protective Layer by Separator Engineering Enables Dendrite‐Free Lithium Metal Batteries with LiNi 0.8 Mn 0.1 Co 0.1 O 2 Cathode

Nanostructured Li Metal Anode to Inhibit Dendrite Growth in Safe Li-Metal Batteries

In Situ Derived Mixed Ion/Electron Conducting Layer on Top of a Functional Separator for High‐Performance, Dendrite‐Free Rechargeable Lithium‐Metal Batteries

Electronegative Nanochannels Accelerating Lithium‐Ion Transport for Enabling Highly Stable and High‐Rate Lithium Metal Anodes