A comparative study of treated clay and synthesized Fe/ZSM-5 zeolite for application in the electrochemical reduction of chromium(VI) as an environmental sensor

Abderrazek El-kordy,Sondos Nizar,Najib Tijani,Abdel-Nasser Kawde,Abdelaziz Elgamouz
DOI: https://doi.org/10.1007/s10008-024-05877-8
IF: 2.747
2024-04-07
Journal of Solid State Electrochemistry
Abstract:Chromium(VI) should be monitored and controlled in the environment since it is introduced into the environment from several sources and it is both toxic and carcinogenic being harmful to the health of humans and animals. This work examined the conversion of hexavalent chromium (Cr(VI)) to tetravalent chromium (Cr(III)) via electrochemical reduction using the carbon paste electrode (CPE) modified with clay sintered at 1000┬Ā┬░C (CPE/clay@1000┬Ā┬░C) and Fe/ZSM-5 zeolite (CPE/Fe/ZSM-5). Fe/ZSM-5 zeolite was synthesized by the hydrothermal method at 170┬Ā┬░C for 72┬Āh. Raw clay, clay sintered at 1000┬Ā┬░C, and Fe/ZSM-5 zeolite materials were comprehensively characterized by XRD, FTIR, and SEM-EDS. Using cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS) of 5.0┬ĀmM of [Fe(CN) 6 ] 3ŌłÆ/4ŌłÆ , CPE/20wt.%/clay, and CPE/40wt.%/Fe/ZSM-5 were found to perform the best. Normal pulse voltammetry (NPV) yields the highest current density compared to other voltammetric techniques, with optimal parameters of 120┬Ās preconditioning time,ŌĆēŌłÆŌĆē1.0┬ĀV preconditioning potential, and 0.08┬ĀV potential increment. The NPV of Cr(VI) on CPE/40wt.%/Fe/ZSM-5 electrode produces a linear response of peak current versus Cr(VI) concentration in the range of 0.3ŌĆō20┬Ā╬╝M with a regression coefficient R 2 ŌĆē=ŌĆē0.991 and lower limits of detection (LOD), and limit of quantification (LOQ) of 0.67┬Ā╬╝M and 2.02┬Ā╬╝M, respectively. Recovery percentages of Cr(VI) in tertiary wastewater were obtained in the range of 88.0%ŌĆē┬▒ŌĆē0.9ŌĆō104.0%ŌĆē┬▒ŌĆē1.1. This study innovatively incorporates iron into zeolite and employs clay structural iron as an auxiliary reducing agent to efficiently convert chromium(VI) to chromium(III), enhancing sensitivity in Cr(VI) detection using the CPE/Fe/ZSM-5 composite.
electrochemistry
What problem does this paper attempt to address?