Abstract:Compared to the semi-active control and passive control systems, an active control system is able to achieve the most desirable vibration control performance because of its high adaptability and capacity to directly produce the required optimal control force (ROCF). However, the disadvantages of high energy consumption and low reliability limit its wide application. To address this dilemma, a novel ‘Quasi-active’ control concept and a representative quasi-active negative stiffness damper (QANSD) system integrating a negative stiffness element and an MR damper were proposed by the authors very recently. The QANSD system has been theoretically and numerically verified to be able to fully generate the ROCF and realize active control performance with much less external power consumption than a semi-active control system. To further validate the effectiveness of the innovative concept and the proposed QANSD system, in this study, a comprehensive experimental investigation was conducted based on the developed prototype device. The fundamentals of the QANSD system including realizations and mechanical behaviours are firstly introduced, and the experimental prototype and setup are then provided. Following that, experimental tests on the QANSD system and its MR damper and negative stiffness element components were carried out under different harmonic excitations and command currents. Based on the experimental test results, artificial neural network-based forward and inverse models are designed for the QANSD force and command current identifications. Moreover, the real-time vibration control performances of the QANSD system are investigated and compared with the active and semi-active control systems. The experimental results revealed that compared to the MR damper that was only able to generate force in the opposite direction of structural motion, the developed QANSD system had the capacity to provide both velocity-resisting and velocity-assisting forces as the ROCF does. Its vibration control performance could fully match that of the desired active control system, but with much lower energy consumption.

Vibration control by using active electromagnetic shunt damper

Vibration Control via Electromagnetic Shunt Damping

Damper Based On Electromagnetic Shunt Damping Method

A new electromagnetic shunt damping treatment and vibration control of beam structures

Shunt Damping Vibration Control Technology: A Review

Control Strategies and Experimental Verifications of the Electromagnetic Mass Damper System for Structural Vibration Control

Vibration Control for Active Magnetic Bearing High-Speed Flywheel Rotor System with Modal Separation and Velocity Estimation Strategy

Self-Sensing Approach for Semi-Active Control of Variable Damping Electromagnetic Suspension System

The Active Vibration Attenuation of A Built-In Motorized Milling Spindle

Experimental study of a novel quasi-active negative stiffness damper system for achieving optimal active control performance

Combining Input Shaping and Adaptive Model-Following Control for Vibration Suppression

Non-contact Rotor Vibration Velocity Sensor and Its Application to Vibration Control of a Flexible Rotor on Active Magnetic Bearings

Active Control for Unbalanced Vibration Control of Electric Spindle-Tool System

Active Vibration Control of Rotor System by A Magneto-Rheological Fluid Damper

Dynamic analogy between an electromagnetic shunt damper and a tuned mass damper

A Novel Multimode Negative Inductance Negative Resistance Shunted Electromagnetic Damping and Its Application on a Cantilever Plate

Enhanced Semi-active piezoelectric vibration control method with shunt circuit by energy dissipations switching

Synchronous Disturbance Suppression of Active Magnetic Bearing Rotor Systems Using Variable Period Adaptive Control Algorithm

Rejection of Synchronous Vibrations of AMB System Using Nonlinear Adaptive Control Algorithm with a Novel Frequency Estimator

A Novel Assembled Pendulum-Type ATMD for Structural Vibration Control

Control Structure Interaction of Electromagnetic Mass Damper System for Structural Vibration Control