Abstract:Dimethyl carbonate is an eco-friendly essential chemical that can be sustainably produced from CO2, which is available from carbon capture activities or can even be captured from the air. The rapid increase in dimethyl carbonate demand is driven by the fast growth of polycarbonates, solvent, pharmaceutical, and lithium-ion battery industries. Dimethyl carbonate can be produced from CO2 through various chemical pathways, but the most convenient route reported is the indirect alcoholysis of urea. Previous research used techniques such as heat integration and reactive distillation to reduce the energy use and costs, but the use of an excess of methanol in the trans-esterification step led to an energy intensive extractive distillation required to break the dimethyl carbonate-methanol azeotrope. This work shows that the production of dimethyl carbonate by indirect alcoholysis of urea can be improved by using an excess of propylene carbonate (instead of an excess of methanol), a neat feat that we showed it requires only 2.64 kW·h·kg−1 dimethyl carbonate in a reaction-separation-recycle process, and a reactive distillation column that effectively replaces two conventional distillation columns and the reactor for dimethyl carbonate synthesis. Therefore, less equipment is required, the methanol-dimethyl carbonate azeotrope does not need to be recycled, and the overall savings are higher. Moreover, we propose the use of a reactive distillation column in a heat integrated process to obtain high purity dimethyl carbonate (> 99.8 wt-%). The energy requirement is reduced by heat integration to just 1.25 kW·h·kg−1 dimethyl carbonate, which is about 52% lower than the reaction-separation-recycle process. To benefit from the energy savings, the dynamics and control of the process are provided for ±10% changes in the nominal rate of 32 ktpy dimethyl carbonate, and for uncertainties in reaction kinetics.

Design and Control of Dimethyl Carbonate−Methanol Separation via Extractive Distillation in the Dimethyl Carbonate Reactive-Distillation Process

Design and Optimization of Reactive Dividing-Wall Extractive Distillation Process for Dimethyl Carbonate Synthesis Based on Quantum Chemistry and Molecular Dynamics Calculation

Optimization and Control of a Reactive Distillation Process for the Synthesis of Dimethyl Carbonate

Design and Control of Dimethyl Carbonate–Methanol Separation Via Pressure-Swing Distillation

Study on a New Reactive Dividing-Wall Column for the Reaction of Vinyl Carbonate and Methanol Ester Exchange to Produce Dimethyl Carbonate

Molecular Mechanism-Based Extractant Screening and Process Design for the Separation of Methanol/dimethyl Carbonate Azeotrope

Novel Procedure for the Synthesis of Dimethyl Carbonate by Reactive Distillation

Direct Production of Diethyl Carbonate from Ethylene Carbonate and Ethanol by Energy-Efficient Intensification of Reaction and Separation

Novel eco-efficient reactive distillation process for dimethyl carbonate production by indirect alcoholysis of urea

Co-Production of Dimethyl Carbonate, Dimethoxymethane and Dimethyl Ether from Methanol: Process Design and Exergy Analysis

Design and Control of Reactive Dividing-Wall Column for the Synthesis of Diethyl Carbonate

Experimental and modeling studies on a homogeneous reactive distillation system for dimethyl carbonate synthesis by transesterification

DESIGN OF INTEGRATED PROCESS OF DISTLLIATION AND PERVAPORATION FOR THE SEPARATION OF MTBE-C4-METHANOL MIXTURE

Development of novel hybrid pre-separation/extractive reactive distillation processes for the separation of methanol/methyl acetate/ethyl acetate

Dimethyl Carbonate/methanol Separation by Azeotropic Distillation with Water: an Alternative Process Driven by Low-Pressure Steam

A reactive distillation process for a cascade and azeotropic reaction system: Carbonylation of ethanol with dimethyl carbonate

Design and Control of Distillation System for Methylal/Methanol Separation. Part 1: Extractive Distillation Using Dmf As an Entrainer

Isobaric Vapor–Liquid Equilibria and Extractive Distillation Process Design for Separating Ethanol and Diethoxymethane

Comparison of alternative configurations for separation of dimethyl carbonate-methanol mixture:steady state simulation and dynamic control

Design and Control of an Energy-Efficient Alternative Process for the Separation of Methanol/toluene/water Ternary Azeotropic Mixture

Vapour-liquid Equilibrium Measurements and Extractive Distillation Process Design for Separation of Azeotropic Mixture (dimethyl Carbonate + Ethanol)