Abstract:Composite fibers made from aramid III and hydroxylated multiwalled carbon nanotubes (MWCNTs-OH) combine the excellent mechanical and electrical properties of both components, resulting in strong antistatic performance. However, it is of paramount importance to ensure the homogeneous dispersion of multi-walled carbon nanotubes functionalized with hydroxyl groups (MWCNTs-OH) within the aramid III spinning solution and optimize the compatibility between the two constituents to augment the overall performance of the composite fibers. To this end, this investigation successfully accomplished the dispersion of MWCNTs-OH in the spinning solution and probed the dispersion mechanism using molecular dynamics simulations. Moreover, composite fibers, comprising 2.4 weight percent MWCNTs-OH, were initially fabricated using the wet spinning method. These fibers displayed a uniform texture and a tensile strength of 1.210 GPa, signifying a noteworthy enhancement of 113.25% in comparison to the strength prior to modification. With respect to thermal behavior, the fibers exhibited a mass reduction of 21.24% within the temperature range of 0°C–538°C. In the temperature interval from 538°C to 800°C, the mass loss diminished to 10.31%, representing a substantial 71.03% reduction when compared to the unmodified state. Remarkably, even when subjected to temperatures exceeding 800°C, the composite fibers retained a residual mass of 68.45%, indicating a notable 61.17% increase from their initial condition. In terms of electrical properties, the fibers exhibited a specific resistance (ρ) of 3.330 × 10 9 Ω cm, demonstrating effective antistatic behavior. In summary, the antistatic composite fibers studied in this paper can effectively mitigate the hazards of static electricity in various applications, including military protection and engineering equipment in both military and civilian fields.

Multi-walled carbon nanotube composite fiber formation in a water coagulation bath and application as wire heater

Single-wall carbon nanotube fiber non-woven fabrics with a high electrothermal heating response

Carbon Welding by Ultrafast Joule Heating.

Robust cellulose-carbon nanotube conductive fibers for electrical heating and humidity sensing

Investigation of processing factors affecting flexible heating wire by coating polyester yarns with carbon nanotubes

Stretchable, flexible fabric heater based on carbon nanotubes and water polyurethane nanocomposites by wet spinning process

Microstructural Tuning of Twisted Carbon Nanotube Yarns through the Wet-Compression Process: Implications for Multifunctional Textiles

Stretchable and Energy-Efficient Heating Carbon Nanotube Fiber by Designing a Hierarchically Helical Structure

Wet Twisting in Spinning for Rapid and Cost‐Effective Fabrication of Superior Carbon Nanotube Yarns

Preparation of Flexible Carbon Nanotube Ropes for Low-Voltage Heat Generator

Research on Thermal Conductivity of Electrospun Polyacrilonitrile-Multi-Walled Carbon Nanotubes Composite Carbon Nanofiber Papers.

Continuous preparation of carbon nanotube fiber and its potential applications in electrical, thermal, mechanical and biosensing fields

Preparation and properties of antistatic high-strength aramid III/MWCNTs-OH fibers

Carbon Nanotube Composites Manufactured by Filament Wind Processing for Electrothermal Deicing Application

Enhanced Mechanical Properties Of Wires Fabricated By Pva And Water-Soluble Multiwall Carbon Nanotubes

Preparation and properties of MWCNTs-BNNSs/epoxy composites with high thermal conductivity and low dielectric loss

Flexible Electrospun Polyvinylidene Fluoride Nanofibrous Composites with High Electrical Conductivity and Good Mechanical Properties by Employing Ultrasonication Induced Dispersion of Multi-Walled Carbon Nanotubes

Electrospinning and Microwave Absorption of Polyaniline/polyacrylonitrile/multiwalled Carbon Nanotubes Nanocomposite Fibers

Scratch-Resistant, Highly Conductive, And High-Strength Carbon Nanotube-Based Composite Yarns

Study on the microstructure, electrical properties, and electric-heating performance of MWCNT/AgNW/cellulose hybrid fibers

A reliable and highly conductive carbon nanotube/thermoplastic polyurethane composite with an enhanced segregated structure for electrically driven heater applications