A highly concentrated electrolyte for high-efficiency potassium metal batteries

Wenxin Xu,Huwei Wang,Junyang Hu,Haodong Zhang,Biao Zhang,Feiyu Kang,Dengyun Zhai

DOI: https://doi.org/10.1039/d0cc07266d

IF: 4.9

2021-01-01

Chemical Communications

Abstract:A highly concentrated electrolyte enables dendrite-free cycling of K metal anodes with a high CE (over 98% over 400 cycles).

chemistry, multidisciplinary

What problem does this paper attempt to address?

A Nonflammable Electrolyte Enabled High Performance K0.5MnO2 Cathode for Low-Cost Potassium-Ion Batteries

Leqing Deng,Tianshuai Wang,Youran Hong,Meiying Feng,Ruiting Wang,Juan Zhang,Qanfan Zhang,Jiangwei Wang,Liang Zeng,Yujie Zhu,Lin Guo

DOI: https://doi.org/10.1021/acsenergylett.0c00912

IF: 22

2020-01-01

ACS Energy Letters

Abstract:The application of a layered K0.5MnO2 cathode in potassium-ion batteries is limited by its poor cycling performance when charged above 4.0 V (vs K+/K), and the underlying mechanism for this electrochemical instability is still unclear. Here, it is discovered that ethylene carbonate (EC) will intercalate into the depotassiated K0.5MnO2, causing the exfoliation of the layered compound and the capacity decay under high charge cutoff voltage. When the carbonates are replaced with a nonflammable phosphate, the electrochemical performance of K0.5MnO2 above 4.0 V (vs K+/K) is significantly enhanced with a large reversible capacity (120 mAh g(-1)) and high capacity retention of 84% after 400 cycles. This phosphate-based electrolyte also demonstrates good compatibility with the commercial graphite anode, enabling the encouraging electrochemical performance of the K0.5MnO2 vertical bar graphite fullcell. The present study provides new insights on further exploration of other electrolytes to advance the emerging low-cost and high-performance potassium-ion batteries.
Customized Electrolyte and Host Structures Enabling High-Energy-Density Anode-Free Potassium–Metal Batteries

Siwu Li,Haolin Zhu,Chenkai Gu,Fenfen Ma,Wei Zhong,Mengchuang Liu,Han Zhang,Ziqi Zeng,Shijie Cheng,Jia Xie

DOI: https://doi.org/10.1021/acsenergylett.3c01067

IF: 22

2023-07-19

ACS Energy Letters

Abstract:Potassium shows great potential to replace lithium in energy storage for its high abundance and comparable energy density. However, issues including an unstable interphase, dendrite growth, and volume change restrict the development of potassium metal batteries, and so far, there is no single cure that works once and for all. Here an anode-free potassium metal battery is demonstrated by introducing a customized electrolyte and host structures that simultaneously promote efficiency, reversibility, and energy density. First, a diluted high-concentration electrolyte with fast kinetics and high stability triggers an inorganic-rich durable interphase. Meanwhile, a carbonaceous host containing narrowly distributed mesopores (MCNF) favors reduced surface area but enough inner space. Together, they achieve a high average Coulombic efficiency (CE) of 99.3% and an initial CE of 95.9% at 3 mA cm–2–3 mA h cm–2. Anode-free MCNF||Prussian blue (PB) potassium cells are delivered with 100 reversible cycles and a high energy density of 362 W h kg–1.

materials science, multidisciplinary,chemistry, physical,nanoscience & nanotechnology,energy & fuels,electrochemistry
An ultra-low concentration electrolyte with fluorine-free bulky anions for stable potassium metal batteries

Qinguang Liu,Mei Geng,Ting Yu,Li Zhang,Changdong Wu,Jie Liu,Shulin Zhao,Qingxin Yang,Robin Song,Jingjuan Ye,Fenfen Wang,Yuping Wu,Dengji Xiao,Yuhui Chen

DOI: https://doi.org/10.1007/s12274-022-4961-7

IF: 9.9

2022-10-03

Nano Research

Abstract:Potassium metal battery is a promising alternative to Li-ion battery for large-scale energy storage due to the abundant potassium resources and high energy density. However, it suffers from rapid capacity fading and safety issues due to the uncontrolled dendrite growth. Herein, we design a fluorine-free ultra-low concentration electrolyte (ULCE) with the super bulky [BPh 4 ] − anions for stable potassium metal battery. In this special electrolyte, the migration rate of K + in the electrolyte is about six times faster than that of the [BPh 4 ] − anions because of the super bulky structure of the [BPh 4 ] − anions, thus resulting in a high K + transference number of 0.76. This high transference number can effectively make up for the deficiency of K + in ULCE for ensuring the normal operation of the potassium metal battery. In addition, the improved transference number can also promote the uniform distribution of K + flux on the surface of the K metal anode, resulting in uniform K deposition. As a result, this electrolyte achieves a high K plating/stripping Coulombic efficiency of 92.6% over 200 cycles and a stable discharging/charging for 100 cycles under the full battery configuration (K used as the anode and perylene-3,4,9,10-tetracarboxylic dianhydride used as the cathode).

materials science, multidisciplinary,chemistry, physical,physics, applied,nanoscience & nanotechnology
Dendrite-free and gasless potassium metal anodes assisted by the mechanical-electrochemical enhancing solid K-electrode and electrolyte interface

Weibo Han,Yongguang Liu,Weidong Meng,Ling Wang,Shan Liu

DOI: https://doi.org/10.1016/j.ces.2023.119295

IF: 4.7

2023-10-06

Chemical Engineering Science

Abstract:With their high-energy density and low-price advantage, potassium (K) metal batteries have been considered the next generation of energy storage system. However, applications of K metal anode are always obstructed by severe side reactions and rapid growth of K dendrites upon cycles due to the fragile solid electrolyte interface (SEI). Herein, a novel mechanical-electrochemical stability enhancement interface is constructed through potassium salt anion structure design and in-situ ion exchange reaction, which enables SEI with reducing side reactions and relieving interface stress during cycling process. The batteries with the designed SEI could deliver excellent performances with a high average Coulombic Efficiency of 95.91 %, a critical current density of 7.5 mA cm −2 and a durable stability of more than 1350 h (0.1 mA cm −2 ). This work provides an effective strategy to construct a high-energy and stable K metal anode interface and will inspire the electrolyte design for other alkali metal batteries.

engineering, chemical
Designing Electrolytes with Steric Hindrance and Film‐Forming Booster for High‐Voltage Potassium Metal Batteries

Zhenlu Yu,Ke Fan,Qun Liu,Danni Wang,Changsheng Chen,Ye Zhu,Haitao Huang,Biao Zhang

DOI: https://doi.org/10.1002/adfm.202315446

IF: 19

2024-01-02

Advanced Functional Materials

Abstract:Abstract Potassium metal batteries coupling with high‐voltage manganese hexacyanoferrate (MnHCF) cathodes are promising candidates for energy storage devices. Ethers are the primary electrolyte solvent candidates for reversible potassium metal anodes, but their poor oxidative stability at high voltage restricts the application. Taking advantage of the steric hindrance, a dilute (1 m ) non‐fluorinated ether with extended alkyl groups is designed to reduce the solvation capability to K ions, thus suppressing the solvent decomposition and tailoring the interphase composition on both cathode and anode sides. The accompanying high viscosity associated with the long alkyl groups can be readily resolved by incorporating an S‐containing additive, which further boosts the oxidative stability to 4.6 V. Furthermore, the additive contributes to the S‐rich organic species among the interphases that inhibit the metal dissolution of the cathode and induce the homogenous K deposition through promoted kinetics. Benefiting from the stable interphases and restricted side reactions, the dilute non‐fluorinated ether‐based electrolyte enables the stable cycling of MnHCF||K cell for over 200 cycles with a high Coulombic efficiency of over 99.4% under a negative/positive capacity ratio of 4.

materials science, multidisciplinary,chemistry, physical,physics, applied, condensed matter,nanoscience & nanotechnology
Cyclic Ether-Based Electrolyte with a Weak Solvation Structure for Advanced Potassium Metal Batteries

Danni Wang,Zhijie Wang,Dengyun Zhai,Biao Zhang

DOI: https://doi.org/10.1002/smll.202403642

IF: 13.3

2024-08-08

Small

Abstract:Potassium metal batteries (PMBs) are promising candidates for large-scale energy storage. Conventional carbonate electrolytes exhibit unsatisfactory thermodynamic stability against potassium (K) metal anode. Linear ether is widely adopted because of its compatibility with K metal, but the poor oxidation stability restricts the application with high-voltage cathodes. Herein, a weakly solvating cyclic ether is proposed as a solvent to stabilize the K-electrolyte interface and build a robust solid-electrolyte interphase (SEI). This weakly solvating electrolyte (WSE) possesses an anion-dominated solvation structure, which facilitates the anion decomposition for constructing an inorganic-rich SEI. The superior mechanical properties of the SEI, as examined by atomic force microscopy, prevent the SEI from fracture. Consequently, this WSE achieves highly reversible plating/stripping behavior of K metal for 1300 h with a high average Coulombic efficiency of 99.20%. Stable full cells are also demonstrated with a high-voltage cathode at harsh conditions. This work complements the design of WSEs for advanced PMBs by cyclic ether solvents.
Ultrastable Dendrite-Free Potassium Metal Batteries Enabled by Weakly-Solvated Electrolyte

Ping Gao,Fei Zhang,Xingchao Wang,Miaomiao Wu,Qian Xiang,Aikai Yang,Ying Sun,Jixi Guo,Yudai Huang

DOI: https://doi.org/10.1021/acsnano.3c06368

IF: 17.1

2023-10-14

ACS Nano

Abstract:Potassium (K) metal is considered one of the most promising anodes for potassium metal batteries (PMBs) because of its abundant and low-cost advantages but suffers from serious dendritic growth and parasitic reactions, resulting in poor cyclability, low Coulombic efficiency (CE), and safety concerns. In this work, we report a localized high-concentration electrolyte (LHCE) consisting of potassium bis(fluorosulfonyl)imide (KFSI) in a cosolvent of 1,2-dimethoxyethane (DME) and...

materials science, multidisciplinary,chemistry, physical,nanoscience & nanotechnology
Optimized Solid Electrolyte Interphase and Solvation Structure of Potassium Ions in Carbonate Electrolytes for High-Performance Potassium Metal Batteries

Yong Jiang,Shangying Lu,Jinlong Jiang,Meng Li,Yalan Liao,Yi Xu,Shoushuang Huang,Bing Zhao,Jiujun Zhang

DOI: https://doi.org/10.1002/smll.202300411

2023-01-01

Abstract:The introduction of electrolyte additives is one of the most potential strategies to improve the performance of potassium metal batteries (PMBs). However, designing an additive that can alter the K+ solvation shell and essentially inhibit K dendrite remains a challenge. Herein, the amyl-triphenyl-phosphonium bromide was introduced as an additive to build a stable solid electrolyte interphase layer. The amyl-TPP cations can form a cation shielding layer on the metal surface during the nucleation stage, preventing K+ from gathering at the tip to form K dendrites. Besides, the cations can be preferentially reduced to form KxPy with fast K+ transport kinetics. The Br- anions, as Lewis bases with strong electronegativity, can not only coordinate the Lewis acid pentafluoride to inhibit the formation of HF, but also change the K+ solvation structure to reduce solvent molecules in the first solvation structure. Therefore, the symmetrical battery exhibits a low deposition overpotential of 123 mV at 0.1 mA cm(-2) over 4200 h cycle life. The full battery, paried with a perylene-tetracarboxylic dianhydride (PTCDA) cathode, possesses a cycle life of 250 cycles at 2 C and 81.9% capacity retention. This work offers a reasonable electrolyte design to obtain PMBs with long-term stablity and safety.
Regulating Solid Electrolyte Interphases on Phosphorus/carbon Anodes Via Localized High-Concentration Electrolytes for Potassium-Ion Batteries

Wei Xiao,Peiyi Shi,Zhengkui Li,Chong Xie,Jian Qin,Huijuan Yang,Jingjing Wang,Wenbin Li,Jiujun Zhang,Xifei Li

DOI: https://doi.org/10.1016/j.jechem.2022.12.041

IF: 13.1

2023-01-01

Journal of Energy Chemistry

Abstract:The resourceful and inexpensive red phosphorus has emerged as a promising anode material of potassium-ion batteries(PIBs)for its large theoretical capacities and low redox potentials in the multi-electron alloying/dealloying reactions,yet chronically suffering from the huge volume expansion/shrink-age with a sluggish reaction kinetics and an unsatisfactory interfacial stability against volatile elec-trolytes.Herein,we systematically developed a series of localized high-concentration electrolytes(LHCE)through diluting high-concentration ether electrolytes with a non-solvating fluorinated ether to regulate the formation/evolution of solid electrolyte interphases(SEI)on phosphorus/carbon(P/C)anodes for PIBs.Benefitting from the improved mechanical strength and structural stability of a robust/uniform SEI thin layer derived from a composition-optimized LHCE featured with a unique solvation structure and a superior K+migration capability,the P/C anode with noticeable pseudocapacitive behaviors could achieve a large reversible capacity of 760 mA h g-1 at 100 mA g-1,a remarkable capacity retention rate of 92.6％over 200 cycles at 800 mA g-1,and an exceptional rate capability of 334 mA h g-1 at 8000 mA g-1.Critically,a suppressed reduction of ether solvents with a preferential decomposition of potassium salts in anion-derived interfacial reactions on P/C anode for LHCE could enable a rational con-struction of an outer organic-rich and inner inorganic-dominant SEI thin film with remarkable mechan-ical strength/flexibility to buffer huge volume variations and abundant K+diffusion channels to accelerate reaction kinetics.Additionally,the highly reversible/durable full PIBs coupling P/C anodes with annealed organic cathodes further verified an excellent practical applicability of LHCE.This encouraging work on electrolytes regulating SEI formation/evolution would advance the development of P/C anodes for high-performance PIBs.
A Localized High Concentration Electrolyte for 4 V-class Potassium Metal Batteries

Wenxin Xu,Huwei Wang,Yueteng Gao,Yaojie Wei,Haodong Zhang,Chongwei Gao,Feiyu Kang,Dengyun Zhai

DOI: https://doi.org/10.1039/d2ya00015f

2022-01-01

Energy Advances

Abstract:A new localized high concentration electrolyte (LHCE) formulation enables improved oxidation stability (4.3 V), K anode passivation and Al anti-corrosion at the same time.
Anion‐Reinforced Solvation Structure Enables Stable Operation of Ether‐Based Electrolyte in High‐Voltage Potassium Metal Batteries

Mengjia Gu,Xunzhu Zhou,Qian Yang,Shenxu Chu,Lin Li,Jiaxin Li,Yuqing Zhao,Xing Hu,Shuo Shi,Zhuo Chen,Yu Zhang,Shulei Chou,Kaixiang Lei

DOI: https://doi.org/10.1002/anie.202402946

2024-05-03

Angewandte Chemie International Edition

Abstract:Electrolytes with anion-dominated solvation are promising candidates to achieve dendrite-free and high-voltage potassium metal batteries. However, it's challenging to form anion-reinforced solvates at low salt concentrations. Herein, we construct an anion-reinforced solvation structure at a moderate concentration of 1.5 M with weakly coordinated cosolvent ethylene glycol dibutyl ether. The unique solvation structure accelerates the desolvation of K+, strengthens the oxidative stability to 4.94 V and facilitates the formation of inorganic-rich and stable electrode-electrolyte interface. These enable stable plating/stripping of K metal anode over 2200 h, high capacity retention of 83.0% after 150 cycles with a high cut-off voltage of 4.5 V in K0.67MnO2//K cells, and even 91.5% after 30 cycles under 4.7 V. This work provides insight into weakly coordinated cosolvent and opens new avenues for designing ether-based high-voltage electrolytes.

chemistry, multidisciplinary
Highly‐solvating Electrolyte Enables Mechanically Stable and Inorganic‐rich Cathode Electrolyte Interphase for High‐performing Potassium‐ion Batteries

Shuoqing Zhao,Guohao Li,Bohan Zhang,Shipeng Zhang,Youxing Liu,Jinhui Zhou,Mingchuan Luo,Shaojun Guo

DOI: https://doi.org/10.1002/adma.202405184

IF: 29.4

2024-05-24

Advanced Materials

Abstract:Cathode–electrolyte interphase (CEI) is crucial for the reversibility of rechargeable batteries, yet receives less attention compared to solid–electrolyte interphase (SEI). The prevalent weakly‐solvating electrolyte is usually proposed from the standing point of obtaining robust SEI, however, the resultant weak ion‐solvent interaction gives rise to excessive free solvents and forms thick CEI with high kinetic barriers, which is disadvantageous for interfacial stability at the high working voltage. Herein, we report a highly‐solvating electrolyte to immobilize free solvents by generating stable ternary complexes and facilitate the growth of homogeneous and ultrathin CEI to boost the electrochemical performances of potassium‐ion batteries (PIBs). Through time‐of‐flight secondary ion mass spectrometry and cryogenic transmission electron microscopy, we reveal that the deliberately coordinated complexes are the key to forming mechanically stable and inorganic‐rich CEI with superior diffusion kinetics for high‐performing PIBs. Coupling with a K0.5MnO2 cathode and a soft carbon (SC) anode, we achieve a high energy density (202.3 Wh kg−1) with an exceptional cycle lifespan (92.5% capacity retention after 500 cycles) in a SC||K0.5MnO2 full cell, setting new performance benchmarks for PIBs. This article is protected by copyright. All rights reserved

materials science, multidisciplinary,chemistry, physical,physics, applied, condensed matter,nanoscience & nanotechnology
Achieving High‐Performance Metal Phosphide Anode for Potassium Ion Batteries via Concentrated Electrolyte Chemistry

Fuhua Yang,Junnan Hao,Jun Long,Sailin Liu,Tian Zheng,Wilford Lie,Jun Chen,Zaiping Guo

DOI: https://doi.org/10.1002/aenm.202003346

IF: 27.8

2020-12-31

Advanced Energy Materials

Abstract:Metal phosphides are regarded as promising anode candidates for high‐energy‐density potassium‐ion batteries (PIBs) due to their high theoretical capacity and relatively low operation voltage. The failure mechanism of the metal phosphides originates from the large volume variation during cycling, which leads to fast capacity degradation. Herein, concentrated electrolyte is used to achieve impressive cycling stability for K‐metal and K‐ion batteries over their more dilute counterparts, mainly benefiting from the anion‐derived robust and uniform solid–electrolyte interphase layer, which is helpful in maintaining the electrode integrity, avoiding excessive side reactions, and suppressing electrolyte decomposition. Further investigations also reveal the synergistic advantages of the superior chemical compatibility of concentrated electrolyte to potassium metal, as well as its remarkable electrochemical stability and enhanced safety compared to conventional dilute electrolytes. This work provides a feasible strategy to mitigate the degradation of metal phosphides to build high‐energy‐density PIBs.

materials science, multidisciplinary,chemistry, physical,physics, applied, condensed matter,energy & fuels
Artificial Solid-Electrolyte Interphase Enabled High-Capacity and Stable Cycling Potassium Metal Batteries

Wang Huwei,Hu Junyang,Dong Jiahui,Lau Kah Chun,Qin Lei,Lei Yu,Li Baohua,Zhai Dengyun,Wu Yiying,Kang Feiyu

DOI: https://doi.org/10.1002/aenm.201902697

IF: 27.8

2019-01-01

Advanced Energy Materials

Abstract:Secondary batteries based on earth-abundant potassium metal anodes are attractive for stationary energy storage. However, suppressing the formation of potassium metal dendrites during cycling is pivotal in the development of future potassium metal-based battery technology. Herein, a promising artificial solid-electrolyte interphase (ASEI) design, simply covering a carbon nanotube (CNT) film on the surface of a potassium metal anode, is demonstrated. The results show that the spontaneously potassiated CNT framework with a stable self-formed solid-electrolyte interphase layer integrates a quasi-hosting feature with fast interfacial ion transport, which enables dendrite-free deposition of potassium at an ultrahigh capacity (20 mAh cm(-2)). Remarkably, the potassium metal anode exhibits an unprecedented cycle life (over 1000 cycles, over 2000 h) at a high current density of 5 mA cm(-2) and a desirable areal capacity of 4 mAh cm(-2). Dendrite-free morphology in carbon-fiber and carbon-black-based ASEI for potassium metal anodes, which indicates a broader promise of this approach, is also observed.
Enabling High‐Performance Potassium‐Ion Batteries by Manipulating Interfacial Chemistry

Haodong Zhang,Huwei Wang,Wei Li,Yaojie Wei,Bohua Wen,Dengyun Zhai,Feiyu Kang

DOI: https://doi.org/10.1002/adfm.202312368

IF: 19

2024-02-01

Advanced Functional Materials

Abstract:An electrolyte additive design is proposed to address the long‐neglected high‐voltage issue, namely, the decomposition of mainstream salt, KFSI (potassium bis(fluorosulfonyl)amide)), in the K‐ion electrolytes. Experimentally, this work demonstrates charge distribution change at the interface, highlighting the role of high‐voltage additives in surface regulation. As a promising candidate for the flame‐retardant electrolyte, triethyl phosphate (TEP)/potassium bis(fluorosulfonyl)amide (KFSI)‐based electrolyte has drawn much attention in the K‐ion battery community. Although the TEP/KFSI formula at a moderate main salt concentration (normally, <3 m) enables the compatibility of the reactive K metal anode, the long‐standing oxidative instability of KFSI salt remains unsolved. Here, an additive strategy is reported to address the high‐voltage issue in the TEP/KFSI electrolyte, and generalize it to the other KFSI‐based electrolytes. The addition of potassium nitrate changes the surface charge distribution and effectively suppresses the decomposition of KFSI toward the high‐voltage cathode. The nitrate‐containing electrolyte enables superior stability of a 4.3 V‐class K‐ion battery, as evidenced by its 80% capacity retention over 2000 cycles (≈6 months) at the 1 C rate. Moreover, the long‐cycling stability of the graphite‐based full cell with Prussian Blue cathode is demonstrated.

materials science, multidisciplinary,chemistry, physical,physics, applied, condensed matter,nanoscience & nanotechnology
Amine-Wetting-Enabled Dendrite-Free Potassium Metal Anode

Jiashen Meng,Hezhen Zhu,Zhitong Xiao,Xingcai Zhang,Chaojiang Niu,Yakun Liu,Gengping Jiang,Xuanpeng Wang,Fan Qiao,Xufeng Hong,Fang Liu,Quanquan Pang,Liqiang Mai

DOI: https://doi.org/10.1021/acsnano.2c01432

IF: 17.1

2022-04-21

ACS Nano

Abstract:Considered as an imperative alternative to the commercial LiFePO4 battery, the potassium metal battery possesses great potential in grid-scale energy storage systems due to the low cost, low standard redox potential, and high abundance of potassium. The potassium dendrite growth, large volume change, and unstable solid electrolyte interphase (SEI) on the potassium metal anode have, however, hindered its applications. Although conductive scaffolds coupling with potassium metal have been widely proposed to address the above issues, it remains challenging to fabricate a uniform composite with uncompromised capacity. Herein, we propose a facile and efficient strategy to construct dendrite-free and practical carbon-based potassium composite anodes via amine functionalization of the carbon scaffolds that enables fast molten potassium infusion within several seconds. On the basis of experiments and theoretical calculations, we show that highly potassiophilic amine groups immediately transform carbon scaffolds from nonwetting to wetting to postassium. Our carbon-cloth-based potassium composite anode (K@CC) can accommodate volume fluctuation, provide abundant nucleation sites, and lower the local current density, achieving nondendritic morphology with a stable SEI. The fabricated K0.7Mn0.7Ni0.3O2|K@CC full cell displays excellent rate capability and an ultralong lifespan over 8000 cycles (68.5% retention) at a high current of 1 A g-1.

materials science, multidisciplinary,chemistry, physical,nanoscience & nanotechnology
Electrolyte Chemistry Enables Simultaneous Stabilization of Potassium Metal and Alloying Anode for Potassium‐Ion Batteries

Hua Wang,Dandan Yu,Xiao Wang,Zhiqiang Niu,Mengxue Chen,Liwei Cheng,Wei Zhou,Lin Guo

DOI: https://doi.org/10.1002/anie.201908607

2019-01-01

Angewandte Chemie

Abstract:Alloying anodes are promising high-capacity electrode materials for K-ion batteries (KIBs). However, KIBs based on alloying anodes suffer from rapid capacity decay due to the instability of K metal and large volume expansion of alloying anodes. Herein, the effects of salts and solvents on the cycling stability of KIBs based on a typical alloying anode such as amorphous red phosphorus (RP) are investigated, and the potassium bis(fluorosulfonyl)imide (KFSI) salt-based carbonate electrolyte is versatile to achieve simultaneous stabilization of K metal and RP electrodes for highly stable KIBs. This salt-solvent complex with a moderate solvation energy can alleviate side reactions between K metal and the electrolyte and facilitate K+ ion diffusion/desolvation. Moreover, robust SEI layers that form on K metal and RP electrodes can suppress K dendrite growth and resist RP volume change. This strategy of electrolyte regulation can be applicable to other alloying anodes for high-performance KIBs.
Stable Solid Electrolyte Interphase for Long-Life Potassium Metal Batteries

Jimin Park,Yeseul Jeong,Muhammad Hilmy Alfaruqi,Yangyang Liu,Xieyu Xu,Shizhao Xiong,Min-Gi Jung,Hun-Gi Jung,Jaekook Kim,Jang-Yeon Hwang,Yang-Kook Sun

DOI: https://doi.org/10.1021/acsenergylett.1c02354

IF: 22

2021-12-27

ACS Energy Letters

Abstract:Potassium (K) is considered to be the most suitable anode material for rechargeable K batteries because of its high theoretical capacity (686 mAh g–1) and low redox potential (−2.93 V vs SHE). However, uneven electrodeposition of K during cycling usually leads to the growth of dendrites, resulting in low Coulombic efficiency and compromising battery safety. Herein, we develop a strategy for stabilizing K metal through simple interface control. The conductive passivation layer can be controllably designed by a spontaneous chemical reaction when a K metal foil is kept in contact with a liquid-phase potassium-polysulfide (PPS); this guides the formation of an electronically and ionically conductive solid electrolyte interphase layer including K2S compound, enabling dense K plating with a dendrite-free morphology. Compared to the bare K metal anode, the PPS-treated K metal anode demonstrates superior cycling stability in symmetric half cells and full cells using a TiS2 cathode under practical constraints.

materials science, multidisciplinary,chemistry, physical,nanoscience & nanotechnology,energy & fuels,electrochemistry
Durable Integrated K‐Metal Anode with Enhanced Mass Transport through Potassiphilic Porous Interconnected Mediator

Lu‐Kang Zhao,Xuan‐Wen Gao,Jianjia Mu,Wen‐Bin Luo,Zhaomeng Liu,Zhenhua Sun,Qin‐Fen Gu,Feng Li

DOI: https://doi.org/10.1002/adfm.202304292

IF: 19

2023-06-16

Advanced Functional Materials

Abstract:A durable and dendrite‐free integrated potassium metal anode is constructed by cold rolling the potassiphilic porous interconnected mediator with K metal. The enhanced K+ transport rate and charge transfer ability decrease the concentration polarization and induces the K+ uniform deposition, eventually contributing to a stable K‐metal anode interface with high performance. K‐metal batteries have become one of the promising candidates for the large‐scale energy storage owing to the virtually inexhaustible and widely potassium resources. The uneven K+ deposition and dendrite growth on the anode causes the batteries prematurely failure to limit the further application. An integrated K‐metal anode is constructed by cold‐rolling K metal with a potassiphilic porous interconnected mediator. Based on the experimental results and theoretical calculations, it demonstrates that the potassiphilic porous interconnected mediator boosts the mass transportation of K‐metal anode by the K affinity enhancement, which decreases the concentration polarization and makes a dendrite‐free K‐metal anode interface. The interconnected porous structure mitigates the internal stress generated during repetitive deposition/stripping, enabling minimized the generation of electrode collapse. As a result, a durable K‐metal anode with excellent cycling ability of exceed 1, 000 h at 1 mA cm−2/1 mAh cm−2 and lower polarization voltage in carbonate electrolyte is obtained. This proposed integrated anode with fast K+ kinetics fabricated by a repeated cold rolling and folding process provides a new avenue for constructing a high‐performance dendrites‐free anode for K‐metal batteries.

materials science, multidisciplinary,chemistry, physical,physics, applied, condensed matter,nanoscience & nanotechnology
A Flexible and Potassiphilic Porous Interconnected Mediator for Dendrite-Free and Stable Potassium Metal Anodes

Lili Song,Renke Li,Wenjing Liao,Jianlu Sun,Xiaodong Li,Yifan Xu,Guangmin Zhou,Xiaosi Zhou

DOI: https://doi.org/10.1016/j.ensm.2024.103643

IF: 20.4

2024-01-01

Energy Storage Materials

Abstract:Uncontrollable dendrite growth caused by uneven surface potential distribution and inevitable volume changes during K platting/stripping processes is a huge challenge currently facing the field of potassium metal anodes. Herein, an integrated dendrite-free potassium metal anode is designed and constructed by cold-rolling a flexible and potassiphilic interconnected mediator on the potassium metal surface. The mediator refers to a honeycomb porous carbon structure with uniformly dispersed CoWO4 nanoparticles (denoted UF-CoWO4 NPs/PC). According to theoretical designs and experimental results, UF-CoWO4 NPs/PC mediator with small Young's modulus and strong adsorption capacity can effectively modulate the surface potential distribution and suppress volume changes during K deposition/stripping, thereby achieving dendrite-free K metal anode interface. As a result, the K@UF-CoWO4 NPs/PC symmetric battery can operate stably for more than 1800 h at 0.5 mA cm-2/0.5 mAh cm-2 in carbonate electrolyte without short circuit. The energy and power densities of the K@UF-CoWO4 NPs/PC||KVPO4F full cell are as high as 430.5 Wh kg-1 and 12.1 kW kg-1, respectively, which are significantly better than previously reported potassium metal batteries. This work provides a new avenue for assembling dendrite-free and high-energy potassium metal batteries.

A highly concentrated electrolyte for high-efficiency potassium metal batteries

A Nonflammable Electrolyte Enabled High Performance K0.5MnO2 Cathode for Low-Cost Potassium-Ion Batteries

Customized Electrolyte and Host Structures Enabling High-Energy-Density Anode-Free Potassium–Metal Batteries

An ultra-low concentration electrolyte with fluorine-free bulky anions for stable potassium metal batteries

Dendrite-free and gasless potassium metal anodes assisted by the mechanical-electrochemical enhancing solid K-electrode and electrolyte interface

Designing Electrolytes with Steric Hindrance and Film‐Forming Booster for High‐Voltage Potassium Metal Batteries

Cyclic Ether-Based Electrolyte with a Weak Solvation Structure for Advanced Potassium Metal Batteries

Ultrastable Dendrite-Free Potassium Metal Batteries Enabled by Weakly-Solvated Electrolyte

Optimized Solid Electrolyte Interphase and Solvation Structure of Potassium Ions in Carbonate Electrolytes for High-Performance Potassium Metal Batteries

Regulating Solid Electrolyte Interphases on Phosphorus/carbon Anodes Via Localized High-Concentration Electrolytes for Potassium-Ion Batteries

A Localized High Concentration Electrolyte for 4 V-class Potassium Metal Batteries

Anion‐Reinforced Solvation Structure Enables Stable Operation of Ether‐Based Electrolyte in High‐Voltage Potassium Metal Batteries

Highly‐solvating Electrolyte Enables Mechanically Stable and Inorganic‐rich Cathode Electrolyte Interphase for High‐performing Potassium‐ion Batteries

Achieving High‐Performance Metal Phosphide Anode for Potassium Ion Batteries via Concentrated Electrolyte Chemistry

Artificial Solid-Electrolyte Interphase Enabled High-Capacity and Stable Cycling Potassium Metal Batteries

Enabling High‐Performance Potassium‐Ion Batteries by Manipulating Interfacial Chemistry

Amine-Wetting-Enabled Dendrite-Free Potassium Metal Anode

Electrolyte Chemistry Enables Simultaneous Stabilization of Potassium Metal and Alloying Anode for Potassium‐Ion Batteries

Stable Solid Electrolyte Interphase for Long-Life Potassium Metal Batteries

Durable Integrated K‐Metal Anode with Enhanced Mass Transport through Potassiphilic Porous Interconnected Mediator

A Flexible and Potassiphilic Porous Interconnected Mediator for Dendrite-Free and Stable Potassium Metal Anodes