Abstract:The MethaneSAT satellite instrument and its aircraft precursor, MethaneAIR, are imaging spectrometers designed to measure methane concentrations with wide spatial coverage, fine spatial resolution, and high precision compared to currently deployed remote sensing instruments. At 12 960 m cruise altitude above ground (13 850 m above sea level), MethaneAIR datasets have a 4.5 km swath gridded to 10 m × 10 m pixels with 17–20 ppb standard deviation on a flat scene. MethaneAIR was deployed in the summer of 2021 in the Permian Basin to test the accuracy of the retrieved methane concentrations and emission rates using the algorithms developed for MethaneSAT. We report here point source emissions obtained during a single-blind volume-controlled release experiment, using two methods. (1) The modified integrated mass enhancement (mIME) method estimates emission rates using the total mass enhancement of methane in an observed plume combined with winds obtained from Weather Research Forecast driven by High-Resolution Rapid Refresh meteorological data in Large Eddy Simulations mode (WRF-LES-HRRR). WRF-LES-HRRR simulates winds in stochastic eddy-scale (100–1000 m) variability, which is particularly important for low-wind conditions and informing the error budget. The mIME can estimate emission rates of plumes of any size that are detectable by MethaneAIR. (2) The divergence integral (DI) method applies Gauss's theorem to estimate the flux divergence fields through a series of closed surfaces enclosing the sources. The set of boxes grows from the upwind side of the plume through the core of each plume and downwind. No selection of inflow concentration, as used in the mIME, is required. The DI approach can efficiently determine fluxes from large sources and clusters of sources but cannot resolve small point emissions. These methods account for the effects of eddy-scale variation in different ways: the DI averages across many eddies, whereas the mIME re-samples many eddies from the LES simulation. The DI directly uses HRRR winds, while mIME uses WRF-LES-HRRR wind products. Emissions estimates from both the mIME and DI methods agreed closely with the single-blind volume-controlled experiments ( N = 21). The York regression between the estimated emissions and the released emissions has a slope of 0.96 [0.84, 1.08], R = 0.83 and N = 21, with 30 % mean percentage error for the whole dataset, which indicates that MethaneAIR can quantify point sources emitting more than 200 kg h −1 for the mIME and 500 kg h −1 for the DI method. The two methods also agreed on methane emission estimates from various uncontrolled sources in the Permian Basin. The experiment thus demonstrates the powerful potential of the MethaneAIR instrument and suggests that the quantification method should be transferable to MethaneSAT if it meets the design specifications.

Technological Maturity of Aircraft-Based Methane Sensing for Greenhouse Gas Mitigation

A new aerial approach for quantifying and attributing methane emissions: implementation and validation

A Study of a Miniature TDLAS System Onboard Two Unmanned Aircraft to Independently Quantify Methane Emissions from Oil and Gas Production Assets and Other Industrial Emitters

Methane point source quantification using MethaneAIR: a new airborne imaging spectrometer

Development of Methods for Top-Down Methane Emission Measurements of Oil and Gas Facilities in an Offshore Environment Using a Miniature Methane Spectrometer and Long-Endurance Uncrewed Aerial System

Multiscale Methane Measurements at Oil and Gas Facilities Reveal Necessary Frameworks for Improved Emissions Accounting

A Practical Framework for Oil and Gas Operators to Estimate Methane Emission Duration Using Operational Data

Creating measurement-based oil and gas sector methane inventories using source-resolved aerial surveys

Aircraft mass balance estimate of methane emissions from offshore gas facilities in the Southern North Sea

Single-blind validation of space-based point-source detection and quantification of onshore methane emissions

Investigating aerial data pre-analysis schemes and site-level methane emission aggregation methods at LNG facilities

Assessment of current methane emission quantification techniques for natural gas midstream applications

Verifying Methane Inventories and Trends With Atmospheric Methane Data

Using a satellite-aircraft hybrid system based on the same sensor to monitor oil and gas facilities for methane emissions

Direct measurement of methane emissions from the upstream oil and gas sector: Review of measurement results and technology advances (2018–2022)

Sensitive Drone Mapping of Methane Emissions without the Need for Supplementary Ground-Based Measurements

Emission Source Detection and Leak Rate Estimation Using Point Measurements of Concentration

The Role of Emission Size Distribution on the Efficacy of New Technologies to Reduce Methane Emissions from the Oil and Gas Sector

Single-blind test of nine methane-sensing satellite systems from three continents

Probability of Detection and Multi-Sensor Persistence of Methane Emissions from Coincident Airborne and Satellite Observations

Toward a Versatile Spaceborne Architecture for Immediate Monitoring of the Global Methane Pledge