Abstract:Atomic layer deposition (ALD) is a technologically important method to grow thin films with high conformality and excellent thickness control from vapor phase precursors. The development of new thermal ALD processes can be limited by precursor reactivity and stability: reaction temperature and precursor design are among the few variables available to achieve higher reactivity in gas-phase reactions, unlike in solution synthesis, where the use of solvent and/or a catalyst can promote a desired reaction. To bridge this synthesis gap between vapor-phase and solution-phase, we demonstrate the use of an ultrathin coating layer of a vapor phase-compatible solvent─an ionic liquid (IL)─on our growth substrate to perform ALD of SnO. Successful SnO deposition is achieved using tin acetylacetonate and water, a process that otherwise would require a stronger counter-reactant such as ozone. The presence of the layer of IL allows a solvent-mediated reaction mechanism to take place on the growth substrate surface. We report a growth per cycle of 0.67 Å/cycle at a deposition temperature of 100 °C in an IL comprising 1-ethyl-3-methylimidazolium hydrogen sulfate. Characterization of the ALD films confirms the SnO film composition, and 1H and 13C NMR are used to probe the solvent-mediated ALD reaction, suggesting a solvent-mediated addition-elimination-type mechanism which breaks a C-C bond in acetylacetonate to form acetone and acetate. Density functional theory calculations show that the IL solvent is beneficial to the proposed solvent-mediated mechanism by lowering the C-C bond cleavage energetics of acetylacetonate compared to the vapor phase. A general class of ligand modification reactions for thermal ALD is thus introduced in this work.

Adsorption Behavior of 3-phenylacrylaldehyde on a Tin Surface during Electroplating

EIS Investigation of the Deposition of Trivalent Chromium Coatings on Al 6063 Alloy

Benzaldehyde derivatives on tin electroplating as corrosion resistance for fabricating copper circuit

ADSORPTION BEHAVIORS AND MECHANISMS OF S930 CHELATING RESIN TOWARD Cu(Ⅱ),Pb(Ⅱ) AND Cd(Ⅱ) FROM AQUEOUS MEDIA

Effective Adsorption Ag(I) Onto Triethylenetetramine-Modified Chitosan Beads: Adsorption Equilibrium, Kinetic, and Thermodynamic Studies

Adsorption of divalent heavy metal ions onto IDA-chelating resins: simulation of physicochemical structures and elucidation of interaction mechanisms.

Anodic behavior in AlCl3-EMIC ionic liquid of Ti6Al4V alloy and its application for enhancing the adhesion strength of aluminum coatings

Coverage-dependent Acrylonitrile Adsorption and Electrochemical Reduction Kinetics on Pb Electrode

Electrochemical mechanism of tin membrane electrodeposition in ultrasonic field

Electrochemistry of Tin Deposition from Methanesulfonic Acid

Adsorption and Desorption of Electroactive Self-Assembled Thiolate Monolayers on Gold

Effect of Two Organic Additives on Tin Electrodeposition

Electrochemical Nucleation and Growth of Sn Onto Double Reduction Steel Substrate from a Stannous Fluoborate Acid Bath

ADSORPTION BEHAVIORS OF P-CHLOROANILINE FROM AQUEOUS SOLUTION ON THREE POLYMERIC RESINS

Study of Tin Electrodeposition with Anion Exchange Membrane in Chloride Solution by a Computational Method

STUDY OF ADSORPTION OF 2-THIOPHENEACETIC ACID ON THREE ADSORBENT RESINS

Electrochemical Mechanism of Tin Membrane Electrodeposition under Ultrasonic Waves

Theoretical and experimental studies of tin electrodeposition

Preparation of aluminum-tin alloy by electrodeposition in low-temperature molten salt system

Ionic Liquid-Mediated Route to Atomic Layer Deposition of Tin(II) Oxide via a C-C Bond Cleavage Ligand Modification Mechanism

Synthesis and mechanism of quaternary ammonium salts based on porphyrin as high-performance copper levelers