Abstract:Improving the comprehensive properties of the high-temperature proton exchange membrane (HTPEM) under wide relative humidity (RH) is a crucial factor affecting the application. For this, a zirconium 4,4-[aminopropyl sulfonate (methyl phosphate)] diphenylamine sulfonic acid (Zr-PPSA), containing −SO3H suitable for proton transfer at high RH and -PO3H2 for conduction at low RH is prepared. The highly functionalized tri-glycidyl isocyanurate (TGIC) as a cross-linker of poly-m-polybenzimidazole (mPBI) is beneficial to improve the membrane-forming property, mechanical strength, and oxidative stability of the composite membranes under less addition. The mPBI–TGIC/ZrPPSA composite membranes are obtained by doping Zr-PPSA in the cross-linked mPBI–TGIC networks at a uniform and high level, which is expected to achieve efficient proton transport. The molecular dynamics simulation primarily proves the proton transfer mechanism. At 180 °C, the proton conductivity of mPBI–TGIC(5)/ZrPPSA(30) and mPBI–TGIC(10)/ZrPPSA(40) can reach 0.125 and 0.134 S/cm at 100% RH and 0.021 and 0.025 S/cm at 0% RH, respectively. After the washing test for 96 h, the decline of conductivity for mPBI–TGIC(10)/ZrPPSA(40) is 2.25%. The mPBI–TGIC(10)/ZrPPSA(40) membrane also exhibits low methanol permeability (8.33 × 10–8 cm2 s–1 at 90 °C). The mPBI–TGIC/ZrPPSA membranes with high proton conductivity, durability, and membrane selectivity are a good candidate for the application in HTPEM.The Supporting Information is available free of charge at https://pubs.acs.org/doi/10.1021/acsaem.2c00333.Additional experimental details and methods of membrane preparation; 1H NMR of PSA and PPSA; titration test; characterization; solubility test; morphology of mPBI–TGIC(20) and mPBI–TGIC(60); mechanical properties; and proton conductivity of M-PPSA (PDF)This article has not yet been cited by other publications.

Proton conducting CaZr0.9In0.1O3-δ ceramic membrane prepared by tape casting

Stable, easily sintered BaCe0.5Zr0.3Y0.16Zn0.04O3−δ electrolyte-based protonic ceramic membrane fuel cells with Ba0.5Sr0.5Zn0.2Fe0.8O3−δ perovskite cathode

A novel zincum-doped perovskite-type ceramic membrane for oxygen separation

Investigation on properties of BaZr0.6Hf0.2Y0.2O3-δ with sintering aids (ZnO, NiO, Li2O) and its application for hydrogen permeation

Phase stability and hydrogen permeation performance of BaCo0·4Fe0·4Zr0·1Y0·1O3-δ ceramic membranes

Enhanced stability of Zr-doped Ba(CeTb)O(3-δ)-Ni cermet membrane for hydrogen separation.

Synthesis and hydrogen permeation of Ni–Ba(Zr0.1Ce0.7Y0.2)O3−δ metal–ceramic asymmetric membranes

Tailoring alkaline metals ion doped La2Ce2O7‐δ proton conductor for hydrogen permeation membranes

A mixed electronic and protonic conducting hydrogen separation membrane with asymmetric structure

Co2-Resistant Hydrogen Permeation Membranes Based on Doped Ceria and Nickel

Highly Proton Conductive and Mechanically Robust SPEEK Composite Membranes Incorporated with Hierarchical Metal–organic Framework/carbon Nanotubes Compound

New Perovskite Membrane with Improved Sintering and Self-Reconstructed Surface for Efficient Hydrogen Permeation

Electrical Conduction and Hydrogen Permeation Investigation on Iron-Doped Barium Zirconate Membrane

Enhanced Stability Of Zr-Doped Ba(Cetb)O3-Delta-Ni Cermet Membrane For Hydrogen Separation

High H2 permeability in F‐doped BaZr0.7Ce0.2Y0.1O3−δ perovskite membranes via thermodynamic controlled sintering

A fast ceramic mixed OH−/H+ ionic conductor for low temperature fuel cells

Large-area protonic ceramic cells for hydrogen purification

Engineering Robust Porous/Dense Composite Hollow Fiber Membranes for Highly Efficient Hydrogen Separation

Two-Step Reactive Aid Sintering of BaZr 0.8 Y 0.2 O 3− δ Proton-Conducting Ceramics

Bifunctional Acid Proton Conductor Doping to Improve the Comprehensive Properties of a Cross-Linked Polybenzimidazole High-Temperature Proton Exchange Membrane

Gd-doped ceria enhanced triple-conducting membrane for efficient hydrogen separation