Abstract:Purpose This paper aims to present the simulation, fabrication and testing of a novel ultra-wide band (UWB) band-pass filters (BPFs) with better transmission and rejection characteristics on a low-loss Taconic substrate and analyze using the coupled theory of resonators for UWB range covering L, S, C and X bands for radars, global positioning system (GPS) and satellite communication applications. Design/methodology/approach The filter is designed with a bent coupled transmission line on the top copper layer. Defected ground structures (DGSs) like complementary split ring resonators (CSRRs), V-shaped resonators, rectangular slots and quad circle slots (positioned inwards and outwards) are etched in the ground layer of the filter. The circular orientation of V-shaped resonators adds compactness when linearly placed. By arranging the quad circle slots outwards and inwards at the corner and core of the ground plane, respectively, two filters (Filters I and II) are designed, fabricated and measured. These two filters feature a quasi-elliptic response with transmission zeros (TZs) on either side of the bandpass response, making it highly selective and reflection poles (RPs), resulting in a low-loss filter response. The transmission line model and coupled line theory are implemented to analyze the proposed filters. Findings Two filters by placing the quad circle slots outwards (Filter I) and inwards (Filter II) were designed, fabricated and tested. The fabricated model (Filter I) provides transmission with a maximum insertion loss of 2.65 dB from 1.5 GHz to 9.2 GHz. Four TZs and five RPs are observed in the frequency response. The lower and upper stopband band width (BW) of the measured Filter I are 1.2 GHz and 5.5 GHz of upper stopband BW with rejection level greater than 10 dB, respectively. Filter II (inward quad circle slots) operates from 1.4 GHz to 9.05 GHz with 1.65 dB maximum insertion loss inside the passband with four TZs and four RPs, which, in turn, enhances the filter characteristics in terms of selectivity, flatness and stopband. Moreover, 1 GHz BW of lower and upper stopbands are observed. Thus, the fabricated filters (Filters I and II) are therefore evaluated, and the outcomes show good agreement with the electromagnetic simulation response. Research limitations/implications The limitation of this work is the back radiation caused by DGS, which can be eradicated by placing the filter in the cavity and retaining its performance. Practical implications The proposed UWB BPFs with novel resonators find their role in the UWB range covering L, S, C and X bands for radars, GPS and satellite communication applications. Originality/value To the best of the authors’ knowledge, for the first time, the authors develop a compact UWB BPFs (Filters I and II) with BW greater than 7.5 GHz by combining reformed coupled lines and DGS resonators (CSRRs, V-shaped resonators [modified hairpin resonators], rectangular slots and quad circle slots [inwards and outwards]) for radars, GPS and satellite communication applications.

Non-Magnetic Non-reciprocal Bandpass Filter With Quasi-Elliptic Response and Tunable Center Frequency

Design of compact dual-band quasi-elliptic filter with high selectivity and wide stopband rejection

A 1.3–1.7-Ghz $Q$ -Enhanced Resonator-Based High-IF Bandpass Filter with 1.5%–67% Tunable Fractional Bandwidth in 65-Nm CMOS Process

A Novel 76 and 94ghz Dual Band Bandpass Filter Using Multilayer Step Impedance Resonators (Sirs)

A CMOS 1.3-1.7GHz Q-Enhanced LC Band-pass RF Filter with 1.5-67% Tunable Fractional Bandwidth

The design and test of dual/triple-mode bandpass filter based on temporal coupled-mode theory

High-Selective Bandpass Filters Based on New Dual-Mode Rectangular Strip Patch Resonators

A New Class of High-Selectivity Bandpass Filters With Constant Bandwidth and 5:1 Bandwidth Tuning Ratio

Synthesis Design of Equal-Ripple and Quasi-Elliptic Wideband BPFs with Independently Reconfigurable Lower Passband Edge

Ultra-Wideband Bandpass Filter with Notched Band Based on Electrooptic Phase Modulator and Phase-Shift Fiber Bragg Grating

Quasi-elliptic band pass filter using resonators based on coupling theory for ultra-wide band applications

Integrated non-reciprocal dual H- and E-Field tunable bandpass filter with ultra-wideband isolation

Filtenna-Filtenna Design for Broadband and High-Selectivity Frequency Selective Surface

Design of a Wide-Stopband Bandpass Filter Using Stepped Impedance Resonators

Frequency-Tunable Constant-Absolute-Bandwidth Single-/Dual-Passband Filters and Diplexers With All-Port-Reflectionless Behavior

Microstrip Quasi-Elliptic Absorptive Bandpass Filter with Ultra-Wide Reflectionless Range and Compact Size

A Tunable Balanced Dual‐band BPF with Quasi‐independently Controlled Center Frequency and Bandwidth

Novel Topology and Design for Wideband Bandpass Filter With Frequency- and Attenuation-Reconfigurable In-Band Notch

Synthesis of Wideband Bandpass Filter With In-Band Complex Transmission Zeros for Frequency-and Attenuation-Reconfigurable In-Band Notch

A Systematic Approach for the Development of Wide Band Band Pass Filters Using Resonators

Balanced tri- and quad-band BPFs based on SIR with improved passbands selectivity