Abstract:Precise and high-speed sorting of individual target cells from heterogeneous populations plays an imperative role in cell research. Although the conventional fluorescence-activated cell sorter (FACS) is capable of rapid and accurate cell sorting, it occupies a large volume of the instrument and inherently brings in aerosol generation as well as cross-contamination among samples. The sorting completed in a fully enclosed and disposable microfluidic chip has the potential to eliminate the above concerns. However, current microfluidic cell sorters are hindered by the high complexities of the fabrication procedure and the off-chip setup. In this paper, a spark-cavitation-bubble-based fluorescence-activated cell sorter is developed to perform fast and accurate sorting in a microfluidic chip. It features a simple structure and an easy operation. This microfluidic sorter comprises a positive electrode of platinum and a negative electrode of tungsten, which are placed on the side of the main channel. By applying a high-voltage discharge on the pair of electrodes, a single spark cavitation bubble is created to deflect the target particle into the downstream collection channel. The sorter has a short switching time of 150 μs and a long lifespan of more than 100 million workable actions. In addition, a novel control strategy is proposed to dynamically adjust the discharge time to stabilize the size of the cavitation bubble for continuous sorting. The dynamic control of continuously triggering the sorter, the optimal delay time between fluorescence detection and cell sorting, and a theoretical model to predict the ideal sorting recovery and purity are studied to improve and evaluate the sorter performance. The experiments demonstrate that the sorting rate of target particles achieves 1200 eps, the total analysis throughput is up to 10,000 eps, the particles sorted at 4000 eps exhibit a purity greater than 80% and a recovery rate greater than 90%, and the sorting effect on the viability of HeLa cells is negligible.

Durability of the bubble-jet sorter enables high performance bio sample isolation

Rapid Switching and Durable On-Chip Spark-Cavitation-bubble Cell Sorter

Spark-generated Microbubble Cell Sorter for Microfluidic Flow Cytometry

Improved Strategy for Jet‐in‐air Cell Sorting with High Purity, Yield, Viability, and Genome Stability

Cell sorting actuated by a microfluidic inertial vortex

Detachable acoustofluidic droplet-sorter

A Rigid Microfluidic Chip for High-Throughput Fluorescence-Activated Cell Sorting

Extremely High-Throughput Parallel Microfluidic Vortex-Actuated Cell Sorting

Enhanced cell sorting and manipulation with combined optical tweezer and microfluidic chip technologies.

High-speed discrimination and sorting of sub-micron particles using a microfluidic device

Image-based cell sorting using focused travelling surface acoustic waves

Multiomics Characterization of a Less Invasive Microfluidic-Based Cell Sorting Technique

Single-cell Sorting Using Integrated Pneumatic Valve Droplet Microfluidic Chip

A Microfluidic Device Based On Gravity And Electric Force Driving For Flow Cytometry And Fluorescence Activated Cell Sorting

Label-Free Continuous Cell Sorting Using Optofluidic Chip

A High-Throughput Microfluidic Cell Sorter Using a Three-Dimensional Coupled Hydrodynamic-Dielectrophoretic Pre-Focusing Module

Design and Performance of a Microfluidic Particle Sorting Device

Hydrodynamic Gating Valve for Microfluidic Fluorescence-Activated Cell Sorting

Automated Raman Based Cell Sorting With 3d Microfluidics

Size-Based Sorting and In Situ Clonal Expansion of Single Cells Using Microfluidics.

Combining 3D Sidewall Electrodes and Contraction/expansion Microstructures in Microchip Promotes Isolation of Cancer Cells from Red Blood Cells.