Abstract:Over the past few years, the external quantum efficiency (EQE) of organic-inorganic hybrid perovskite light-emitting diodes (LEDs) has experienced a tremendous progress. The reported highest EQE of infrared and green perovskite LEDs has reached 21.6% and 20.3%, respectively, which is comparable to commercial organic light-emitting diodes. Even the slightly inferior blue perovskite LEDs have a recorded EQE of 12.3%. However, poor device stability is the biggest problem hindering the commercial application of perovskite optoelectronic devices, which is a severer problem in LEDs because the higher operating voltage will trigger acute ion migration. Encouragingly, however, the lifetime of perovskite LEDs has increased from the initial several seconds to over 200 hours, presenting a dramatic progress. The outstanding performance of perovskite LEDs is closely related with the excellent material properties, including tunable bandgaps, narrow full width at half maximum (FWHM), high defect tolerance, high electron/hole mobility and solution processibility. Moreover, the diversity of components and structure of perovskite makes the addition of various additives effective, enabling optimizing device performance through kinds of chemical methods. In this review, we analyzed the impacts of component and structure designing on the efficiency and stability of perovskite LEDs from the perspective of compositional designing, defect passivation and interfacial modification. We analyzed how compositional designing affects the optoelectronic properties through altering the ratio between organic and inorganic components or adding other molecules and ions to adjust the dimension of perovskites. As for defect passivation, we discussed various passivating reagents and their working mechanism. In addition, we summarized the significance of interfacial modification between different functional layers, including improving the wetting property of the substrates, achieving higher crystal quality of perovskite films, passivating the defects at the interfaces, blocking leakage current and reducing hole/electron injecting barrier. Finally, we discussed the scientific and technological challenges yet to be resolved before perovskite LEDs can be considered for commercial applications.

Polymer‐Assisted Crystal Growth Regulation and Defect Passivation for Efficient Perovskite Light‐Emitting Diodes

Efficient Light-Emitting Diodes Based on Nanocrystalline Perovskite in A Dielectric Polymer Matrix

A Polymerization‐Assisted Grain Growth Strategy for Efficient and Stable Perovskite Solar Cells

Polymer-assisted Crystal Growth Regulation and Defect Passivation for Efficient Perovskite Solar Cells

Defect Passivation with Novel Silicone Copolymers for Efficient Perovskite Light-Emitting Diodes

Synergetic Dual‐Additive Strategy for Regulating Crystallization and Defect Passivation of Perovskite Nanograin Toward Efficient Light‐Emitting Diodes

Phase Regulation and Defect Passivation Enabled by Phosphoryl Chloride Molecules for Efficient Quasi-2D Perovskite Light-Emitting Diodes

Improving Green Perovskite Nanoplate Light-Emitting Diode Performance via Precision Passivation and Phase Distribution Management

Enhanced Performance of Perovskite Light-Emitting Devices with Improved Perovskite Crystallization

Enhanced efficiency and stability of blue perovskite light-emitting diodes through dual defect passivation

Efficient Polycrystalline Single‐Cation Perovskite Light‐Emitting Diodes by Simultaneous Intracrystal and Interfacial Defect Passivation

Efficient All-Inorganic Perovskite Light-Emitting Diodes Enabled by Simultaneous Growth Regulation and Defect Passivation

Crystallization Regulation and Defect Passivation of High‐Performance Flexible Perovskite Light‐Emitting Diodes Based on Novel Dielectric/Metal/Dielectric Transparent Electrodes

High‐Performance Perovskite Light‐Emitting Diode with Enhanced Operational Stability Using Lithium Halide Passivation

A Multifunctional Ionic Liquid Additive Enabling Stable and Efficient Perovskite Light‐Emitting Diodes

Polymer interface engineering enabling high-performance perovskite solar cells with improved fill factors of over 82%

Boosting Perovskite Light-Emitting Diode Performance Via Tailoring Interfacial Contact.

Comprehensive Passivation for High-Performance Quasi-2D Perovskite LEDs.

Research Progress of Composition and Structure Design in Perovskites for High Performance Light-emitting Diodes

Perovskite Light‐Emitting Diodes with External Quantum Efficiency Exceeding 22% via Small‐Molecule Passivation

Targeted Distribution of Passivator for Polycrystalline Perovskite Light-Emitting Diodes with High Efficiency