Abstract:A new constitutive model is proposed for the description of induced anisotropic damage in brittle rocks. The formulation of the model is based on relevant results from the micromechanics consideration. The distribution of microcracks is approximated by a second order damage tensor. The effective elastic properties of damaged material are derived from the free enthalpy function. The evolution of damage is directly related to the growth of microcracks in different space orientations. The volumetric dilatancy due to sliding crack opening is taken into account. The model is extended to the description of creep deformation in brittle rocks. The time dependent deformation is seen as a consequence of the sub-critical propagation of microcracks due to stress corrosion process. The proposed model is applied to a typical brittle rock, the Lac du Bonnet granite. A general good agreement is obtained between numerical simulations and experimental data. Anisotropic damage due to microcracks is an essential mechanism of inelastic deformation and failure in most brittle rocks. Many experimental tests have confirmed various mechanisms of nucleation and growth of microcracks. Under compressive stresses, sliding wing cracks seem to be the principal propagation mode of microcracks (Brace and Bombolakis 1963; Nemat-Nasser and Horii 1982; Wong 1982; Stef 1984; Olsson 1995). Due to roughness of crack surfaces in geomaterials, the crack sliding may induce an associated aperture which is an origin of volumetric dilatancy in these materials (Nemat-Nasser and Obata 1988). When the crack length reaches some critical values, the coalescence of microcracks occurs and localized macro-cracks appear leading to the failure of material. The kinetics of failure is controlled by confining pressure and there is a transition from brittle failure to ductile failure when the confining pressure increases (Fredrich et al. 1989; Horii and Nemat-Nasser 1985, 1986). The main consequences of induced microcracks are: non linear stress-strain relations, deterioration of elastic properties, induced anisotropy, volumetric dilatancy, irreversible strains due to residual crack opening, unilateral response due to crack closure, and hysteresis associated with frictional mechanism. These features have to be considered in the constitutive modelling. Two families of damage models have been developed for the description of induced damage: micromechanical approaches and phenomenological models (we do not give here an exhaustive list of many models reported in the literature). The main advantage of micromechanic al approaches is the ability to account for physical mechanisms involved in the nucleation and growth of microcracks. For the construction of a micromechanical model, two steps are generally performed. The first step consists in the evaluation of the effective elastic properties of material weakened by microcracks. The second step is to propose a suitable damage evolution law for microcrack growth. The main features related to microcrack growth, opening and closure, friction, interaction between cracks, could be taken into account in such micromechanical models. The macroscopic behaviour of material is then obtained through a homogenization procedure. This renders these models difficult to be applied to practical applications. Phenomenological models use internal variables to represent the density and orientation of microcracks, for instance, scalar variable for isotropic damage, second and fourth

Mixed-mode crack growth simulation in rock-like materials with the smoothing gradient-enhanced damage model associated with a novel equivalent strain

A Dynamic Description of the Smoothing Gradient Damage Model for Quasi-Brittle Failure

Phase Field Modeling of Mixed-Mode Crack in Rocks Incorporating Heterogeneity and Frictional Damage

Simulation of Rock Crack Propagation and Failure Behavior Based on a Mixed Failure Model with SPH

An Adaptive Damage Smear Method for Modelling the Meso-Fracturing Process of Rock

A smoothing gradient thermo-mechanical damage model for thermal shock crack propagation: Theory and FE implementation

Non-break Modeling and Numerical Simulation for Non-Intact Rock Failure Process

A dual-scale approach to model time-dependent deformation, creep and fracturing of brittle rocks

Implementation and Engineering Application of an Improved Rotating Smeared Crack Model in Rock Mass Fracture

Modelling of Dynamic Rock Fracture Process with a Rate-Dependent Combined Continuum Damage-Embedded Discontinuity Model Incorporating Microstructure

Multiscale Numerical Modeling of Propagation and Coalescence of Multiple Cracks in Rock Masses

A novel damaged-based numerical manifold method to simulate the failure process of brittle rocks from damage evolution to crack initiation, propagation and coalescence

A Phase Field Model with Modified Volumetric-Deviatoric Decomposition for the Mixed-Mode Fracture of Rock

A Novel Physical Continuum Damage Model for the Finite Element Simulation of Crack Growth Mechanism in Quasi-Brittle Geomaterials

A Damage-Based Numerical Manifold Approach to Crack Propagation in Rocks

A coupled thermo-mechanical bond-based smoothed particle dynamics model for simulating thermal cracking in rocks

An Interacting Wing-Crack Based Semi-Analytical Meso-Scale Model for Describing Elasto-Plastic Damage Behavior of Brittle Rocks

Modelling Rock Failure with a Novel Continuous to Discontinuous Method

Micromechanical Model for Simulating the Fracture Process of Rock

A dynamic damage constitutive model and three-dimensional internal crack propagation of rock-like materials in bond-based peridynamic

5569 - DAMAGE AND CREEP DEFORMATION IN BRITTLE ROCKS