Abstract:To study the impact of introducing fluorine atoms onto the conjugated phenyl side chains of benzo[1,2-b:4,5-b′]dithiophene (BDT)-based copolymers, three novel donor−π–acceptor (D−π–A) alternative polymers PE40, PE42, and PE44 were designed and synthesized. The phenyl-substituted-BDT, thieno[3,2-b]thiophene, and benzo[d][1,2,3]triazole (BTA) served as the donor, π-bridge, and acceptor units, respectively, to enable linear polymer backbones. When introducing two or four fluorine atoms into the phenyl side units of PE40, the polymers PE42 and PE44 demonstrate a gradual decrease of energy levels and an increase of crystallinity in the pristine and blend films. It was noted that the increase in fluorine atoms gradually improved the performance parameters of polymer solar cells (PSCs) with Y6 as the acceptor. The PE40:Y6 device yielded a power conversion efficiency (PCE) of up to 7.07% with a short-circuit (JSC) of 21.36 mA cm–2, an open-circuVOC) of 0.65 V, and a fill factor (FF) of 0.51, and PE42:Y6 exhibited a better PCE of 10.11% (JSC = 23.25 mA cm–2, VOC = 0.74 V, and FF = 0.59), while PE44:Y6 exhibited the best PCE of 13.62% (JSC = 25.29 mA cm–2, VOC = 0.82 V, and FF = 0.66). The suitable energy offsets between the donor and the acceptor, high and balanced charge-carrier mobility, and the optimal morphology of the blend film contributed to the high performance of PE44:Y6 combination. Our results demonstrate that introducing more fluorine atoms onto the phenyl side units of BDT is a prospective approach to break the trade-offs between VOC, JSC, and FF, and finally improve the performance of PSCs.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsami.0c07720?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsami.0c07720</a>.Detailed synthetic routes, characterization, TGA, DSC, UV–vis spectra in solution, photoluminescence spectra, energy level diagram, AFM, and device fabrication (<a class="ext-link" href="/doi/suppl/10.1021/acsami.0c07720/suppl_file/am0c07720_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

V enhancement of thienobenzofuran and benzotriazole backboned photovoltaic polymer by side chain sulfuration or fluoridation

Enhancement the photovoltaic performance of conjugated polymer based on simple head-to-head alkylthio side chains engineered bithiophene

New Wide Bandgap Conjugated D-A Copolymers Based on Benzo[d]thiazole for Efficient Photovoltaics

Bulky electron donating side chain enhances the open-circuit voltage of benzodithiophene photovoltaic polymers

Polythiophenes with carboxylate side chains and vinylene linkers in main chain for polymer solar cells

Donor-Acceptor Photovoltaic Polymers Based On 1,4-Dithienyl-2,5-Dialkoxybenzene With Intramolecular Noncovalent Interactions

Fluorination on electron-deficient units of benzothiadiazole-based donor-acceptor conjugated polymers for novel fullerene-based organic solar cells

Design of a thiophene-fused benzotriazole unit as an electron acceptor to build D–A copolymers for polymer solar cells

Enhanced Charge Transfer, Transport and Photovoltaic Efficiency in All‐Polymer Organic Solar Cells by Polymer Backbone Fluorination

Non-halogenated solvent processable wide bandgap polymer based on carboxylate-substituted benzodithiophene for high-efficiency polymer solar cells

Benzobisthiazole Unit in 4, 8-Connection Mode to Build D-A Polymer Donors Achieving High Short-circuit Current Density for Organic Solar Cells

Impact of an electron withdrawing group on the thiophene-fused benzotriazole unit on the photovoltaic performance of the derived polymer solar cells

A Copolymer of Benzodithiophene with TIPS Side Chains for Enhanced Photovoltaic Performance

Effect of alkylthiolated hetero-aromatic rings on the photovoltaic performance of benzodithiophene-based polymer/fullerene solar cells

Gradual Fluorination on the Phenyl Side Chains for Benzodithiophene-Based Linear Polymers to Improve the Photovoltaic Performance

Benzobisthiazole-Substituted Terpolymers for Non-Halogenated Solvent-Processed Polymer Solar Cells with Enhanced Efficiency, Thermal Stability and Mechanical Robustness

Novel donor-acceptor polymer containing 4,7-bis(thiophen-2-yl)benzo[c][1,2,5]thiadiazole for polymer solar cells with power conversion efficiency of 6.21%

Side-chain engineering of wide-bandgap polymers based on benzo[1,2-b:4,5-b′]dithiophene and [2,2′-bithiophene]-4,4′-dicarboxylate for fullerene-free organic solar cells

Synthesis and photovoltaic properties of a copolymer of benzo[1,2- b:4,5- b']dithiophene and bithiazole

High-Crystalline Medium-Band-Gap Polymers Consisting of Benzodithiophene and Benzotriazole Derivatives for Organic Photovoltaic Cells

Synthesis and Photovoltaic Properties of an Alternating Polymer Based on Benzo[1,2-B:4,5-B′]dithiophene and Fluorine Substituted 4,7-Dithiophene-2-yl-2,1,3-benzothiadiazole