Abstract:Computer-Aided Design (CAD) tools are extensively used throughout all of the steps in a VLSI design flow. The physical design domain is one of the three domains that are conceptually abstracted in representing a VLSI design flow. This research work focuses on three areas in VLSI physical design domain: clock tree design and buffer insertion, interconnect model order reduction and LVS verification. First, an optimal buffer insertion for clock delay and skew minimization algorithm is developed based on the theory that the minimal clock delay can be obtained by equalizing derivatives of a convex function, and the minimal clock skew can be achieved by equalizing delay functions of different source-to-sink paths. Experimental results show that the presented algorithm achieves both minimal delay and skew in real clock tree design. Further, an automatic clock tree design algorithm is developed for realizing the pre-specified clock arrival time requirements that often occur in an IP block based design environment. In this proposed strategy, planar clock routing and buffer insertion are carried out simultaneously to minimize clock delay and skew, and a full waveform simulation is applied to ensure the signal integrity necessary for high-speed VLSI design. Second, an efficient balanced truncation realization algorithm is presented for interconnect model order reduction. This algorithm shows that there is no need to solve the whole Lyapunov equation for controllability and observability grammians before obtaining approximation to their predominant spaces, and a linear order reduction algorithm can be achieved by extending the O(n) Krylov Subspace Oblique Projection method. Finally, a unique LVS methodology is proposed for the verification of a quad-core microprocessor designed with a triple-well 90-nm CMOS technology. Due to the IP reuse, the standard LVS flow is incapable of handling the additional design complexity in verifying the LVS for the chip designed with multiple power domains. This proposed LVS strategy consists of two phases. The first phase involves verifying LVS at the block level as well as the full-chip level. The second phase aims at verifying the integrity of the multi-power-domain power grid. The proposed LVS methodology was successfully verified by real silicon.

Design and Verification of Low Latency AMBA AXI4 and ACE Protocol for On-Chip Peripheral Communication

Design and FPGA Verification of a Novel Reliable Real-Time Data Transfer System

A Generic UVM Verification Framework Based on Two-Stage Comparison for Protocol-Agnostic Data Streams in Digital Designs

Design and FPGA implementation of AHB-to-APB bridge

Analysis and Application of New Generation AMBA 3 AXI Protocol

Design and Verification of AHB-PCI Bridge

AXI-REALM: A Lightweight and Modular Interconnect Extension for Traffic Regulation and Monitoring of Heterogeneous Real-Time SoCs

Design and Implementation of the AMBA 2.0 IP Core

A networks-on-chip emulation/verification framework

Design of High-Speed Data Transmission System for IC Test

Advanced Extensible Crossbar Protocol for Connecting Multi-Cores and Shared-Memory on-Chip

An AMBA Bus IP Core Evaluation Method Based on VIP

A NoC Emulation/Verification Framework

VHDL Design and Verification for PCI-Slave Interface

Co-Emulation of Scan-Chain Based Designs Utilizing SCE-MI Infrastructure

Design of the AXIe instrument module interfacing component

A System-Level SOC Verification Method Based on Hardware Accelerator

A Deep Research on the Chip Verification Platform Based on Network

A Script-Based Cycle-True Verification Framework to Speed-Up Hardware and Software Co-Design: Performance Evaluation on ECC Accelerator Use-Case

Algorithms and Methodology in Physical Domain Optimization for High-Performance Vlsi Design

Design of SPARC V8 Based Transaction Level SoC Verification Platform