Abstract:Semi -transparent perovskite solar cells with spray coated silver nanowire (AgNW) and AgNW/ZnO composite top electrode were fabricated and investigated. For the spray coated AgNW electrode, both sheet resistance (Rs) and averaged visible light transmittance over 400-800 nm (AVT) decrease with the decrease of nozzle moving speed, which is ascribed to the increase of AgNW density of the electrode. A highest power conversion efficiency (PCE) of 13.27% with a low AVT of 16.3% was achieved for a small area cell having AgNW top electrode with Rs of 15 Omega/rectangle. A thin layer of ZnO nano particles was coated onto the AgNW electrode, which decreases the sheet resistance of the AgNW/ZnO composite electrode. Such a conductivity enhancement is ascribed to the improvement the interconnection between AgNWs by filling the voids between AgNW wires with ZnO nano particles. In the meanwhile, owing to the light scattering effect of ZnO nano particles, light transparence in the visible light range (400-800 nm) of the AgNW/ZnO composite electrode increases slightly after the deposition of ZnO layer. Both device performance and reproducibility of the perovskite solar cells are improved by using the AgNW/ZnO top electrode. As an example, power conversion efficiency of 7.30% with an AVT of 23.3% was achieved for a small solar cell using AgNW electrode with Rs of 78 Omega/rectangle. While a highest PCE of 11.13% with the same AVT was achieved for the same cell after the deposition of ZnO layer, demonstrating the cover effect of ZnO layer. A high PCE of 8.18% was also achieved for a AgNW/ZnO based cell with an area of 1 cm(2), which is more than 50% enhancement than the AgNW based cell (5.35%).

Efficient organic solar cells with solution‐processed silver nanowire electrodes

Dual Plasmonic Nanostructures for High Performance Inverted Organic Solar Cells.

Enhanced Efficiency of Organic Solar Cells with Silver Nanowire Electrodes

Solution-Processed Flexible Polymer Solar Cells With Silver Nanowire Electrodes

Efficient Inverted Polymer Solar Cells with Directly Patterned Active Layer and Silver Back Grating

Silver Nanowire–graphene Hybrid Transparent Conductive Electrodes for Highly Efficient Inverted Organic Solar Cells

Silver Nanowire Electrodes integrated in Organic Solar Cells with Thick Active Layer based on a Low‐Cost Donor Polymer

Enhanced charge collection of AgNWs-based top electrode to realize high-performance, all-solution processed organic solar cells

Bulk contact between silver nanowires top electrode and interface layer enables high performance of full‐solution processed semitransparent organic solar cell module

Multi‐Length Scaled Silver Nanowire Grid for Application in Efficient Organic Solar Cells

Improved Performance of Flexible Amorphous Silicon Solar Cells with Silver Nanowires

Realizing 17.5% Efficiency Flexible Organic Solar Cells via Atomic-Level Chemical Welding of Silver Nanowire Electrodes

Improving Performance of Nonfullerene Organic Solar Cells over 13% by Employing Silver Nanowires-Doped PEDOT:PSS Composite Interface.

Solution‐Processed Silver Nanowire as Flexible Transparent Electrodes in Organic Solar Cells

Effect of Silver Nanospheres Embedded in Buffer Layer Based on Organic Solar Cells

Low-Temperature Solution Processed Random Silver Nanowire as a Promising Replacement for Indium Tin Oxide

Flexible nonfullerene organic solar cells based on embedded silver nanowires with an efficiency up to 11.6

Efficiency Enhancement of Organic Solar Cells Using Transparent Plasmonic Ag Nanowire Electrodes

Water-assisted formation of highly conductive silver nanowire electrode for all solution-processed semi-transparent perovskite and organic solar cells

Fully Solution Processed Semi-Transparent Perovskite Solar Cells with Spray Coated Silver Nanowires/zno Composite Top Electrode

Preparation of Device-Level ZnO-Covered Silver Nanowires Films and Their Applications as Sub-Electrode for Polymer Solar Cells