Abstract:The abrupt first-order metal-insulator phase transition in single-crystal vanadium dioxide nanowires (NWs) is engineered to be a gradual transition by axially grading the doping level of tungsten. We also demonstrate the potential of these NWs for thermal sensing and actuation applications. At room temperature, the graded-doped NWs show metal phase on the tips and insulator phase near the center of the NW, and the metal phase grows progressively toward the center when the temperature rises. As such, each individual NW acts as a microthermometer that can be simply read out with an optical microscope. The NW resistance decreases gradually with the temperature rise, eventually reaching 2 orders of magnitude drop, in stark contrast to the abrupt resistance change in undoped VO2 wires. This novel phase transition yields an extremely high temperature coefficient of resistivity similar to 10%/K, simultaneously with a very low resistivity down to 0.001 Omega.cm, making these NWs promising infrared sensing materials for uncooled microbolometers. Lastly, they form bimorph thermal actuators that bend with an unusually high curvature, similar to 900 m(-1).K-1 over a wide temperature range (35-80 degrees C), significantly broadening the response temperature range of previous VO2 bimorph actuators. Given that the phase transition responds to a diverse range of stimuli-heat, electric current, strain, focused light, and electric field-the graded-doped NWs may find wide applications in thermo-opto-electro-mechanical sensing and energy conversion.

The Metal-Insulator Transition in Vanadium Oxide Nanofilms Enables Microkelvin-Resolution Thermometry

Thermal-stimulated Phase Transition of Vanadium Dioxide Enabling Versatile Transduction and Smart Applications

Thermal Conductivity and Dynamic Heat Capacity Across the Metal-Insulator Transition in Thin Film VO2

A Novel Vanadium Dioxide-Based Dual-Heater Microfluidic Thermal Flow Sensor with Record High Sensitivity

Broad Range Tuning Of Phase Transition Property In Vo2 Through Metal-Ceramic Nanocomposite Design

In Situ Cooling and Heating Study of VO 2 Phase Transition

Metal-insulator transition in vanadium dioxide nanobeams: probing sub-domain properties of strongly correlated materials

A Metal-Insulator Transition Study of VO2 Thin Films Grown on Sapphire Substrates

Direct observation of nanoscale Peltier and Joule effects at metal-insulator domain walls in vanadium dioxide nanobeams.

Vanadium Dioxide-Based High Sensitivity Dual-Heater Calorimetric Microfluidic Sensor

Broad Range Tuning of Phase Transition Property in VO2 Through Metal‐Ceramic Nanocomposite Design

Nanoelectrical Monitoring the Nonvolatile Behavior of VO2 under Multi-Field Stimulate by Conductive Atomic Force Microscopy

Probing Thermal Properties of Vanadium Dioxide Thin Films by Time-Domain Thermoreflectance Without Metal Film*

Room-temperature Metal–insulator Transition of MBE Grown VO 2 Film Investigated by Temperature Dependent Resistance and Transmittance

Nanoscale Engineering in VO2 Nanowires Via Direct Electron Writing Process.

Nanoelectrical monitoring the nonvolatile behavior of VO 2 under multi-field stimulate by conductive atomic force microscopy

Infrared spectroscopy and nano-imaging of the insulator-to-metal transition in vanadium dioxide

Axially Engineered Metal–Insulator Phase Transition by Graded Doping VO2 Nanowires

Direct Evidence for the Coexistence of Nanoscale High-Conduction and Low-Conduction Phases in VO2 Films

Measurement of a solid-state triple point at the metal-insulator transition in VO2

Single-Walled Carbon Nanotube-Controlled Meyer–Neldel Rules in Vanadium Oxide Films for Applications As Thermistor Materials in Sensors and Detectors