Abstract:3D printing of continuous carbon fiber reinforced thermoplastic (CFRTP) composites is increasingly under development owing to its unparalleled flexibility of manufacturing 3D structures over traditional manufacturing processes. However, key issues, such as weak interlayer bonding, voids between beads and layers, and low volume ratio of carbon fiber, in the mainstream fuse deposition modeling (FDM) and extrusion suppress the applications of these techniques in mission‐critical applications, such as aerospace and defense. This communication reports a novel approach, inspired by laminated object manufacturing (LOM), for 3D printing of continuous CFRTPs using prepreg composite sheets. The prepreg sheets are successively cut based on the sliced CAD geometry, and then bonded layer upon layer using a CO2 laser beam and a consolidation roller system. The void content is low by computed tomography scans and interlaminar bonding strength is as high as conventional autoclave method by lap shear strength tests. The excellent interfacial bonding strength and high volume ratio of continuous carbon fiber contribute to the highest reported tensile strength (668.3 MPa) and flexural strength (591.16 MPa) to date, for all 3D printed CFRTPs. Moreover, the proposed technique also enables controlling the alignment of carbon fiber in printed layers. CFRTPs with unidirectional [0°]s, cross‐ply [0/90°]s, and [0/‐45/0/45°]s fiber reinforcement are produced and evaluated for mechanical properties. The proposed 3D printing method is broadly beneficial for industries requiring high performance and lightweight structural materials with complex geometries. A mechanism to 3D print ultrahigh strength carbon fiber reinforced polymer (CFRP) composites capable of achieving aligned continuous carbon fiber reinforcement is presented. The mechanical properties are superior to the existing 3D printed CFRP materials due to an excellent interfacial bonding and minimal void content. During this laser assisted 3D printing technique, temperature at the material interface reaches well above the matrix melting point.

Additively manufactured 3D short carbon fiber scaffold for thermoset composites

Fused-Deposition Modeling 3D Printing of Short-Cut Carbon-Fiber-Reinforced PA6 Composites for Strengthening, Toughening, and Light Weighting

3D-Printing of Meso-structurally Ordered Carbon Fiber/Polymer Composites with Unprecedented Orthotropic Physical Properties

Experimental and Theoretical Studies on 3D Printed Short and Continuous Carbon Fiber Hybrid Reinforced Composites

Performance of Short Fiber Interlayered Reinforcement Thermoplastic Resin in Additive Manufacturing.

Highly loaded carbon fiber filaments for 3D‐printed composites

Study on short fiber reinforcement mechanism for mechanical performance improvement of 3D‐printed short‐continuous carbon fiber reinforced thermoplastic composites

Preparation of short CF/GF reinforced PEEK composite filaments and their comprehensive properties evaluation for FDM-3D printing

3D Printing Technology for Short-continuous Carbon Fiber Synchronous Reinforced Thermoplastic Composites: A Comparison between Towpreg Extrusion and In Situ Impregnation Processes

3D printing for continuous fiber reinforced thermoplastic composites: mechanism and performance

A hybrid additive manufacturing process for production of functional fiber-reinforced polymer composite structures

Processing and mechanical characterization of short carbon fiber-reinforced epoxy composites for material extrusion additive manufacturing

Mechanical and Material Characterization of 3d Printed Continuous Fiber Reinforced Photopolymer Matrix Composites

Processing, mechanical characterization, and micrography of 3D-printed short carbon fiber reinforced polycarbonate polymer matrix composite material

Preparation and Evaluation of the Tensile Characteristics of Carbon Fiber Rod Reinforced 3D Printed Thermoplastic Composites

Hybrid Metal-Organic Frameworks/Carbon Fibers Reinforcements for Additively Manufactured Composites

A Novel Route to Fabricate High-Performance 3D Printed Continuous Fiber-Reinforced Thermosetting Polymer Composites

Investigation of Fiber–Matrix Interface Strength via Single-Fiber Pull-Out Test in 3D-Printed Thermoset Composites: A Simplified Methodology

Effect of Short Glass Fiber Addition on Flexural and Impact Behavior of 3D Printed Polymer Composites

3D Printing of Ultrahigh Strength Continuous Carbon Fiber Composites

Dynamic Capillary-Driven Additive Manufacturing of Continuous Carbon Fiber Composite