Abstract:Ternary strategy plays a significant important role in enhancing the performance of organic solar cells (OSCs), which leads to higher light absorption intensity, effective exciton dissociation, charge transport, and collection. With IDIC as the third component, ternary OSCs can be improved in both JSC and fill factor (FF) with a remarkable power conversion efficiency (PCE) of 18.9%. In this study, using PM6:L8‐BO as the main system and non‐fullerene acceptor IDIC as the third component, a series of ternary organic solar cells (TOSCs) are fabricated. The results reveal that IDIC plays a significant role in enhancing the performance of TOSCs by optimizing the morphology of blended films and forming interpenetrating nanostructure. The improved film morphology facilitates exciton dissociation and collection in TOSCs, which causes an increase in the short‐circuit current density (JSC) and fill factor (FF). Further, by optimizing the IDIC content, the power conversion efficiency (PCE) of TOSCs reaches 18.9%. Besides, the prepared TOSCs exhibit a JSC of 27.51 mA cm−2 and FF of 76.64%, which are much higher than those of PM6:L8‐BO‐based organic solar cells (OSCs). Furthermore, the addition of IDIC improves the long‐term stability of the OSCs. Meanwhile, TOSCs with a large effective area of 1.00 cm2 have been prepared, which exhibit a PCE of 12.4%. These findings suggest that modifying the amount of the third component can be a useful strategy to construct hight‐efficiency TOSCs with practical application potential.

Two compatible non-fullerene acceptors towards efficient ternary organic photovoltaics

18.7% Efficiency Ternary Organic Solar Cells Using Two Non-Fullerene Acceptors with Excellent Compatibility

Over 16.5% efficiency in ternary organic solar cells by adding an alloyed acceptor with energy transfer process

Efficient Ternary Organic Solar Cells Enabled by the Integration of Nonfullerene and Fullerene Acceptors with a Broad Composition Tolerance

Efficient Ternary Organic Solar Cells with a New Electron Acceptor Based on 3,4-(2,2-Dihexylpropylenedioxy)thiophene

Two Well-Compatible Acceptors with Efficient Energy Transfer Enable Ternary Organic Photovoltaics Exhibiting a 13.36% Efficiency

Boosting the efficiency of organic solar cells via dual non-fullerene acceptors

Ternary Organic Solar Cells with J71 As Donor and Alloyed Acceptors Exhibiting 13.16% Efficiency

Ternary organic solar cells with PCEs of up to 16.6% by two complementary acceptors working in alloy-like model

Efficient Dual Mechanisms Boost the Efficiency of Ternary Solar Cells with Two Compatible Polymer Donors to Exceed 19

ITC‐2Cl: A Versatile Middle‐Bandgap Nonfullerene Acceptor for High‐Efficiency Panchromatic Ternary Organic Solar Cells

Boosting Photovoltaic Performance of Ternary Organic Solar Cells by Integrating a Multi-Functional Guest Acceptor

Non-fullerene acceptor fibrils enable efficient ternary organic solar cells with 16.6% efficiency

Enhancing Intermolecular Packing and Light Harvesting through Asymmetric Non-Fullerene Acceptors for Achieving 18.7% Efficiency Ternary Organic Solar Cells

Ternary Organic Solar Cells Based on Two Compatible Nonfullerene Acceptors with Power Conversion Efficiency >10.

Achieving high-performance ternary organic solar cells by adding a high hole-mobility non-fullerene acceptor

Third component with a high LUMO energy level enables 17.69% efficiency in ternary organic solar cells

Achieved 18.9% Efficiency by Fine‐Tuning Non‐Fullerene Acceptor Content to Simultaneously Increase the Short‐Circuit Current and Fill Factor of Organic Solar Cells

Enhanced Fill Factor and Efficiency of Ternary Organic Solar Cells by a New Asymmetric Non‐Fullerene Small Molecule Acceptor

A Well‐Mixed Phase Formed by Two Compatible Non‐Fullerene Acceptors Enables Ternary Organic Solar Cells with Efficiency over 18.6%

Asymmetric Non-Fullerene Acceptor Derivatives Incorporated Ternary Organic Solar Cells