Abstract:A series of novel acceptors with multidimensional conformation molecular structures (linear or cross‐shaped) are designed and introduced as a third component to effectively modulate the phase separation and inhibit the excessive crystallization of the active layer blend films. The active layer bulk heterojunction (BHJ) blends with a suitable phase separation and crystallization are of great importance to the exciton dissociation, charge transfer, and ultimately the efficiency of the organic solar cells (OSCs). Herein, an effective approach is developed to modulate the molecule's crystallization and phase separation of BHJ blends via introducing a multidimensional (MD) second acceptor. The efficiency of the OSCs can be largely boosted when the cross‐shaped MD acceptors are introduced into the BHJs as a third component. The ternary OSCs based on PTB7‐Th:IEICO‐4F:SFCPDT exhibit a higher power conversion efficiency (PCE) (PCE = 13.29%) than that of the PTB7‐Th:IEICO‐4F binary system (PCE = 11.67%). It is found that the ternary films deliver higher and more balanced carrier mobility, as well as reduced carrier recombination. The positive effect can be also extended to the PBDB‐T‐2F: IT‐4F‐based ternary system. When FLIDT and SFIDT are employed as the third component, the PCE values can be increased from pristine 11.98–12.42% and 13.16%, respectively. It is anticipated to further boost the efficiency of the non‐fullerene OSCs by rationally designing the structure of the third component for a state‐of‐the‐art active layer system.

Boosting the efficiency of organic solar cells via dual non-fullerene acceptors

A Comprehensively Theoretical and Experimental Study of Carrier Generation and Transport for Achieving High Performance Ternary Blend Organic Solar Cells

Achieved 18.9% Efficiency by Fine‐Tuning Non‐Fullerene Acceptor Content to Simultaneously Increase the Short‐Circuit Current and Fill Factor of Organic Solar Cells

Efficient Ternary Organic Solar Cells Enabled by the Integration of Nonfullerene and Fullerene Acceptors with a Broad Composition Tolerance

Boosting Efficiency of Non‐Fullerene Organic Solar Cells Via Introducing Multidimensional Second Acceptors

Two compatible non-fullerene acceptors towards efficient ternary organic photovoltaics

Enhancing Intermolecular Packing and Light Harvesting through Asymmetric Non-Fullerene Acceptors for Achieving 18.7% Efficiency Ternary Organic Solar Cells

Efficient Dual Mechanisms Boost the Efficiency of Ternary Solar Cells with Two Compatible Polymer Donors to Exceed 19

Achieving high-performance ternary organic solar cells by adding a high hole-mobility non-fullerene acceptor

Using fullerene as the third component to boosting the photovoltaic performances of pyran acceptor

Over 16.5% efficiency in ternary organic solar cells by adding an alloyed acceptor with energy transfer process

High-performance organic solar cells based on polymer donor/small molecule donor/nonfullerene acceptor ternary blends

Versatile third components for efficient and stable organic solar cells

A Simple Dithieno[3,2‐b:2′,3′‐d]pyrrol‐Rhodanine Molecular Third Component Enables Over 16.7% Efficiency and Stable Organic Solar Cells

Boosting Photovoltaic Performance of Ternary Organic Solar Cells by Integrating a Multi-Functional Guest Acceptor

Non-fullerene acceptor fibrils enable efficient ternary organic solar cells with 16.6% efficiency

Promoting charge separation resulting in ternary organic solar cells efficiency over 17.5%

A Well‐Mixed Phase Formed by Two Compatible Non‐Fullerene Acceptors Enables Ternary Organic Solar Cells with Efficiency over 18.6%

18.7% Efficiency Ternary Organic Solar Cells Using Two Non-Fullerene Acceptors with Excellent Compatibility

Employing a Narrow-bandgap Mediator in Ternary Solar Cells for Enhanced Photovoltaic Performance.

Ternary organic solar cells with PCEs of up to 16.6% by two complementary acceptors working in alloy-like model