Abstract:To mitigate PM2.5 emissions is becoming a pressing concern, because these particles pose a threat to public health. Evidence shows that bead-free nanofiber with diameter of <100 nm is more likely to capture the PM2.5, however, currently it is impossible to fabricate bead-free nanofiber with such diameter without introduction of other substances. To fabricate bead-free polyacrylonitrile (PAN) nanofibers with diameter of <100 nm, we improved the electrospinning process of membrane fabrication via design of experiment (DOE), and we then used these nanofibers to filter PM2.5 emissions from burning cigarettes and fused deposition modeling (FDM) three-dimensional (3D) printing. The DOE was based on a L27 (313) orthodoxy array, which consists of six controllable factors, that is, the concentration of solution, the spinning voltage, the rotating speed, the tip-to-collector distance, the flow rate of the syringe pump, and the electrospinning temperature, each of them has three levels. The results showed that the nanofibers of the least diameter (i.e., 77 nm) can be fabricated under the following condition: 8 wt% PAN solution, 12 kV voltage, 5000 r/min, 12 cm tip-to-collector distance, 0.6 ml/h flow rate, and 50 °C electrospinning temperature. Range analysis and analysis of variance (ANOVA) showed that the concentration of PAN solution has the most significant effect on the diameter, and their values are positively correlated. An examination in a two-chamber filtering device showed the PAN membrane with the least fiber diameter has a PM2.5 filtration efficiency of 99.26%. A filtration test on standard FDM 3D printing process showed the membrane has a PM2.5 removal efficiency of 81.16%. This work could mitigate PM2.5 emissions from cigarette tobacco and FDM 3D printing, and it would be used to other scenarios, such as industrial and traffic emissions.

Electrospun poly(vinyl alcohol) nanofiber films containing menthol/β-cyclodextrin inclusion complexes for smoke filtration and flavor retention

Performance of Electrospun Polyvinylidene Fluoride Nanofibrous Membrane in Air Filtration

Morphology engineering processed nanofibrous membranes with secondary structure for high-performance air filtration

Nicotine-Loaded Polyvinyl Alcohol Electrospun Nanofibers as Transdermal Patches for Smoking Cessation: Formulation and Characterization

In-situ polarized coaxial PVDF/PL nanofiber filtration membrane with high efficiency, low resistance and antimicrobial properties

Preparation of electrospun PVA@Ls@BAC@PDMS composite nanofibrous air filtration membrane with high efficiency removal for PM2.5 and excellent heat resistance

Preparation of PVA@PEI@BAC@CNC composite nanofibrous film with high efficiency filtration for PM2.5

Influence of Electrospinning Parameters on the Morphology of Electrospun Poly(3-hydroxybutyrate-co-3-hydroxyvalerate) Fibrous Membranes and Their Application as Potential Air Filtration Materials

Multi‐Unit Needleless Electrospinning for One‐Step Construction of 3D Waterproof MF‐PVA Nanofibrous Membranes as High‐Performance Air Filters

High Filterable Electrospun Nanofibrous Membrane with Charged Electret After Electrification Treatment for Air Filtration

Electrospun Polyurethane/β-Cyclodextrin Composite Membranes for Aerosol Filtration and Adsorption of Volatile Organic Compounds from the Air

Directional Water Transfer Janus Nanofibrous Porous Membranes for Particulate Matter Filtration and Volatile Organic Compound Adsorption

Enhanced Air Filtration Efficiency through Electrospun PVC/PVP/MWCNTs Nanofibers: Design, Optimization, and Performance Evaluation

Three-dimensional composite electrospun nanofibrous membrane by multi-jet electrospinning with sheath gas for high-efficiency antibiosis air filtration

Electrospun Hydrophobic Nanofiber Films from Biodegradable Zein and Curcumin with Improved Tensile Strength for Air Filtration

Polyacrylonitrile Nanofiber Membranes Modified with Ni-Based Conductive Metal Organic Frameworks for Air Filtration and Respiration Monitoring

Improving the Electrospinning Process of Fabricating Nanofibrous Membranes to Filter PM2.5

Effects of surface morphology of electrospun polystyrene fiber on its air filtration performance

Self-Charging, Breathable, and Antibacterial Poly(lactic acid) Nanofibrous Air Filters by Surface Engineering of Ultrasmall Electroactive Nanohybrids

Preparation of PVA/PEI/CNC/ZnO composite membrane with good mechanical properties and water resistance by electrostatic spinning using for efficient filtration of PM2.5

Constructing Stable Polyvinyl Alcohol/Gelatin/Cellulose Nanocrystals Composite Electrospun Membrane with Excellent Filtration Efficiency for PM2.5