Abstract:Real-Time RFI Detection and Flagging (RT-RDF) for microwave radiometers is a versatile new FPGA algorithm designed to detect and flag Radio-Frequency Interference (RFI) in microwave radiometers. This block utilizes computationally-efficient techniques to identify and analyze RF signals, allowing the system to take appropriate measures to mitigate interference and maintain reliable performance. With L-Band microwave radiometry as the main application, this RFI detection algorithm focuses on the Kurtogram and Spectrogram to detect non-Gaussian behavior. To gain further modularity, an FFT-based filter bank is used to divide the receiver's bandwidth into several sub-bands within the band of interest of the instrument, depending on the application. Multiple blanking strategies can then be applied in each band using the provided detection flags. The algorithm can be re-configured in the field, for example with dynamic integration times to support operation in different environments, or configurable thresholds to account for variable RFI environments. A validation and testing campaign has been performed on multiple scenarios with the ARIEL commercial microwave radiometer, and the results confirm the excellent performance of the system.

What problem does this paper attempt to address?

The problem that this paper attempts to solve is the radio - frequency interference (RFI) problem faced by L - band microwave radiometers during Earth observations. Specifically: 1. **Impact of Radio - Frequency Interference (RFI)**: Since L - band microwave radiometers measure very weak background noise signals, radio - frequency interference (RFI) has a great impact on the accuracy of measurement results. RFI can come from signals that illegally occupy passive observation frequency bands (in - band RFI), legal but adjacent - band signals with part of the power leaking into the radiometer bandwidth (near - band effect), and harmonic or intermodulation products in the low - frequency band (out - of - band effect). These interferences will lead to a positive deviation in antenna temperature (AT), thereby affecting the accuracy of observed physical variables such as soil moisture and sea - water salinity. 2. **Deficiencies of Existing Solutions**: Existing RFI detection methods may not be able to identify and process various types of interference signals in real - time and efficiently, especially in a dynamically changing RFI environment. This limits the reliability and performance of microwave radiometers in practical applications. 3. **Proposed New Algorithm**: To overcome the above problems, the paper proposes a real - time RFI detection and flagging (RT - RDF) algorithm based on FPGA. This algorithm detects and mitigates RFI through the following methods: - **Sub - band Analysis**: Use an FFT filter bank to divide the receiver's bandwidth into multiple sub - bands for more detailed signal analysis and processing. - **Statistical Analysis**: Utilize statistical tools such as Kurtogram and Spectrogram to detect non - Gaussian behavior, thereby identifying RFI. - **Adaptive Configuration**: The algorithm can be re - configured on - site, for example, adjusting the dynamic integration time to support operations in different environments, or configuring thresholds to adapt to different RFI environments. Through these methods, the paper aims to provide an efficient, flexible, and reliable RFI detection and mitigation scheme to improve the performance and reliability of L - band microwave radiometers in Earth observations.

Development of a Dynamically Re-Configurable Radio-Frequency Interference Detection System for L-Band Microwave Radiometers

Estimation and Mitigation of Time-Variant RFI Based on Iterative Dual Sparse Recovery in Ultra-Wide Band Through-Wall Radar.

A FPGA-based Fast Converging Digital Adaptive Filter for Real-time RFI Mitigation on Ground Based Radio Telescopes

Research on High-speed Detection Method of Radar Signal Based on RFSoC.

Radio Frequency Interference Detection and Mitigation Using Compressive Statistical Sensing

RFI-Resistant Decimeter Band Radiometer for the RATAN-600 Radio Telescope

Real-time RFI filtering for uGMRT: Overview of the released system and relevance to the SKA

An Experimental setup to develop RFI mitigation techniques for radio astronomy

Constrained Iterative Adaptive Algorithm for the Detection and Localization of RFI Sources Based on the SMAP L-Band Microwave Radiometer

IQRM: real-time adaptive RFI masking for radio transient and pulsar searches

Radio Frequency Interference Mitigation at the WSRT

A SAR Multiple RFI Suppression Method via Frobenius Norm and Iterative Matrix Decomposition

RPCA-Based Radio Interference Cancellation Algorithm for Compact HF Surface Wave Radar

Jam-Guard: Low-Cost, Hand-held Device for First Responders to Detect and Localize Jammers

RFI Source Localization in Microwave Interferometric Radiometry: A Sparse Signal Reconstruction Perspective

Low- and Moderate-Level RFI Detection Using Point-Source Ripple for Synthetic Aperture Interferometric Radiometer

Software Defined Radio-Based Electromagnetic Environment Interference Detection

Interference detection in radio astronomy applying Shapiro-Wilks normality test, spectral entropy, and spectral relative entropy

Categorize Radio Interference using component and temporal analysis

Trajectory Based RFI Subtraction and Calibration for Radio Interferometry

An Efficient Radio Frequency Interference Mitigation Algorithm in Real Synthetic Aperture Radar Data