Abstract:The Space Propulsion Laboratory (SPL) of the Massachusetts Institute of Technology (MIT) is developing the Ion Electrospray Propulsion System (iEPS), designed to address a current need in CubeSat technology: miniaturized electric thrusters. These could be used for different applications, ranging from attitude control to interplanetary flights. In this work, performed together with the Space Systems Laboratory of the Costa Rica Institute of Technology (SETEC Lab), we explore a case study in which the iEPS is used for constellation management in Low Earth Orbit (LEO) when integrated in a 3U CubeSat. We analyze how a 180° separation in the Right Ascension of the Ascending Node (RAAN) between two CubeSats (SatA and SatB) starting in the same orbit can be achieved by modifying one of the spacecraft's orbital altitude, resulting in a difference in their rate of nodal precession (defined as the drift rate) due to the J 2 effect, and therefore a difference in their relative RAAN. The method consists of SatB increasing its semi-major axis, drifting in a higher orbit with a lower drift rate, and returning to the original semi-major axis once the desired difference in RAAN in achieved relative to the other spacecraft. SatA will stay in its original orbit, using its thruster to compensate for orbital energy loss due to atmospheric drag, therefore demonstrating another application of iEPS for constellation management. Three different simulations were studied, defined as the minimum time trajectory, minimum propellant trajectory and a hybrid trajectory, consisting of reaching a higher altitude orbit, but actively changing the RAAN using the propulsion system instead of drifting. It was observed that the difference in this orbital element could be achieved using 85 g of propellant in as little as 164 days for the minimum time trajectory. The same difference could also be achieved using only 44 g of propellant in 245 days for the minimum propellant trajectory. Furthermore, the results of the hybrid trajectory showed that the goal could be achieved in 161 days, but using 158 g of propellant mass, demonstrating the benefit of using a drift orbit. The results proved the feasibility of implementing iEPS for constellation management using 3U CubeSats in LEO.

Mission analysis of a 1U CubeSat post-mission disposal using a thin-film vacuum arc thruster

Advanced Inflatable De-Orbit Solutions for Derelict Satellites and Orbital Debris

De-orbiting Small Satellites Using Inflatables

Nonlinear Programming Control Using Differential Aerodynamic Drag for CubeSat Formation Flying

A Pulsed Vacuum Arc Ion Thruster for SmallSat Applications

Development and Laboratory Testing of a CubeSat-Compatible Staged Ionic-Liquid Electrospray Propulsion System

CubeSats Detumbling Using Only Embedded Asymmetric Magnetorquers

Plug-and-Play Drag Sail Module for LEO Satellites: Implementation and Early Testing of AirDragMod (ADM)

CubeSat constellation management using Ionic Liquid Electrospray Propulsion

PCB-integrated embedded planar magnetorquers for small satellites intelligent detumbling

Design of the Propulsion System of Nano satellite: StudSat2

Design and Analysis of Cold Gas Thruster to De-Orbit the PSLV Debris

Endurance testing and characterization of a novel candidate for CubeSat propulsion: The Advanced Cusp Field Thruster (ACFT)

Piece-wise affine MPC-based attitude control for a CubeSat during orbital manoeuvres

Aerodynamic Analysis of Deorbit Drag Sail for CubeSat Using DSMC Method

An On-Orbit CubeSat Centrifuge for Asteroid Science and Exploration

Thrust Model and Trajectory Design of an Interplanetary CubeSat with a Hybrid Propulsion System

Nanosatellite Design Considerations for a Mission to Explore the Propellant Sloshing Problem

Development and Qualification of Green Propellant Micropump for MicroSat and CubeSat Propulsion Systems

Attitude Control of the Asteroid Origins Satellite 1 (AOSAT 1)

Performance characterization of a miniature microwave discharge ion thruster operated with water