Abstract:According to relevant statistics, the electricity consumption for lighting in university buildings accounts for 20 to 40% of the total energy consumption of the buildings. Lighting energy saving is a key influential factor in achieving a low-carbon campus construction. The electricity consumption for lighting is simultaneously affected by the utilization of natural daylight and artificial lighting schemes. Currently, there is a lack of research regarding the dynamic quantitative correlation between the geometric design of external windows affecting the utilization of natural daylight and carbon emissions. Also, research on the dynamic synergistic impact between natural light utilization and artificial lighting on carbon emissions has not been observed. Hence, there is a lack of quantitative carbon impact prediction and guidance in the early design and actual operation of such spaces. This study took the professional drawing space of a university in the severe cold regions of Shenyang as a prototype. Daylight factor (DF) and spatial daylight autonomy (sDA) were determined using Rhino + Grasshopper and Ladybug + Honeybee for window geometry. DIALux evo simulation was used to analyze the carbon emissions of space operation, followed by correlation analysis and multiple linear regression analysis using SPSS to determine the degree of influence of each window design parameter on the carbon emissions. The window-to-floor ratio (WFR), window-to-wall ratio (WWR), windowsill height (Hws), window width (Ww), and window height (Hw) had inhibitory effects on carbon emissions from daylight-responsive artificial lighting (C), and the influence of different orientations was different. Under the condition of an opposing window, the overall C trend of the professional drawing space was west < east< south < north, and the C of the morning period in each orientation was significantly lower than that in the afternoon period. Taking the frame structure system space with a floor-to-floor height of 4.2 m as an example, within the requirements of WFR and WWR, the C of the west-facing professional drawing classroom with 2.55 m for Hw, 0.75 m for Hws, and 9.6 m for Ww was the smallest. To a certain extent, opening large windows and opening high windows can reduce the C of the space.

Method for Determining Sensor Location for Automated Shading Control in Office Building

Sensitivity analysis of sensor placement in energy-efficient, grid-interactive ready small office buildings with dynamic shading and lighting control

An Optimization Method of Sensor Layout to Improve Source Identification Accuracy in the Indoor Environment

Integrated control of blind and lights in daily office environment

A Simulation-Aided Approach in Examining the Viability of Passive Daylighting Techniques on Inclined Windows

Optimization of Indoor Temperature Sensor Deployment in Large Spaces for Multiple Building Operation Scenarios Using the Genetic Algorithm

Impact of Occupants’ Behaviour on Energy Consumption and Corresponding Strategies in Office Buildings

Direct Radiation Model of Louver Shading in Office Building Shade Based on Network Optimization Method

Lighting System Control in Office Building Using Occupancy Prediction Based on Historical Occupied Ratio

Multi-objective optimization design for windows and shading configuration considering energy consumption and thermal comfort: A case study for office building in different climatic regions of China

Identification of passive solar design determinants in office building envelopes in hot and humid climates using data mining techniques

Design and implementation of lighting control system using battery-less wireless human detection sensor networks

Study on influencing factors for occupant window-opening behavior: Case study of an office building in Xi'an during the transition season

Inferring building occupancy based on statistical modeling of multi-sensor data

BIM-supported sensor placement optimization based on genetic algorithm for multi-zone thermal comfort and IAQ monitoring

Investigations into impacts of fenestration and shading variation on ventilation and energy performance of an office in cooling and heating seasons

Smart Design of Portable Indoor Shading Device for Visual Comfort—A Case Study of a College Library

A method for determining the weight of objective indoor environment and subjective response based on information theory

Analysis of the long-term effects of solar radiation on the indoor thermal comfort in office buildings

Influence of Opposing Exterior Window Geometry on the Carbon Emissions of Indoor Lighting under the Combined Effect of Natural Lighting and Artificial Lighting in the City of Shenyang, China

GA-BP based daylight prediction and sensor placement in residential areas