Abstract:Abstract Device and material reliability of 2-dimensional materials, especially CVD-grown MoS 2 , has remained un-addressed since 2011 when the first TMDC transistor was reported. For its potential application in next generation electronics, it is imperative to update our understanding of mechanisms through which MoS 2 transistors’ performance degrades under long-term electrical stress. We report, for CVD-grown monolayer MoS 2 , results on temporal degradation of material and device performance under electrical stress. Both low and high field regimes of operation are explored at different temperatures, gate bias and stress cycles. During low field operation, current is found to saturate after hundreds of seconds of operation with the current decay time constant being a function of temperature and stress cycle. High field operation, especially at low temperature, leads to impact ionization assisted material and device degradation. It is found that high field operation at low temperature results in amorphization of the channel and is verified by device and kelvin probe force microscopy (KPFM) analyses. In general, a prolonged room temperature operation of CVD-grown MoS 2 transistors lead to degraded gate control, higher OFF state current and negative shift in threshold voltage (V T ). This is further verified, through micro-Raman and photoluminescence spectroscopy, which suggest that a steady state DC electrical stress leads to the formation of localized low resistance regions in the channel and a subsequent loss of transistor characteristics. Our findings unveil unique mechanism by which CVD MoS 2 undergoes material degradation under electrical stress and subsequent breakdown of transistor behavior. Such an understanding of material and device reliability helps in determining the safe operating regime from device as well as circuit perspective.

Calcium Alginate as an Active Device Component for Light-Triggered Degradation of 2D MoS 2 -Based Transient Electronics

Triggered Degradation of 250 Μm-Thick Mg Targets Using Acetic Acid for Transient Electronic Applications

Destructive Electronics from Electrochemical-Mechanically Triggered Chemical Dissolution

Electrochemically Triggered Degradation Of Silicon Membranes For Smart On-Demand Transient Electronic Devices

The emergence of transient electronic devices

Enabling Transient Electronics with Degradation on Demand Via Light-Responsive Encapsulation of a Hydrogel-Oxide Bilayer.

Material Strategies for On-Demand Smart Transient Electronics

High‐Temperature‐Triggered Thermally Degradable Electronics Based on Flexible Silicon Nanomembranes

Laser-Triggered Degradation of Silicon Circuits by Lithiation and Moisture Uptake for On-Demand Transient Electronics

Transient Electronics: Materials and Wireless Microfluidic Systems for Electronics Capable of Chemical Dissolution on Demand (adv. Funct. Mater. 9/2015)

Transient Electronics: Dissolvable Metals for Transient Electronics (Adv. Funct. Mater. 5/2014)

Dissolvable Metals for Transient Electronics

Moisture-triggered physically transient electronics

Phototriggerable Transient Electronics Via Fullerene-Mediated Degradation of Polymer:Fullerene Encapsulation Layer.

Geometrical and Chemical-Dependent Hydrolysis Mechanisms of Silicon Nanomembranes for Biodegradable Electronics

Materials and Wireless Microfluidic Systems for Electronics Capable of Chemical Dissolution on Demand

25Th Anniversary Article: Materials for High‐Performance Biodegradable Semiconductor Devices

Transient Light-Emitting Diodes Constructed from Semiconductors and Transparent Conductors that Biodegrade Under Physiological Conditions

Wafer-Scale Two-Dimensional MoS2 Layers Integrated on Cellulose Substrates Toward Environmentally Friendly Transient Electronic Devices

Electrothermal transport induced material reconfiguration and performance degradation of CVD-grown monolayer MoS2 transistors

Fully Recyclable Liquid‐Metal‐Based Multi‐Layer Thermally Triggered Transient Electronic Devices