Abstract:This paper proposes a new modulation technique that can reduce the current distortion and extend the current reconstruction range for a three-phase inverter using only dc-link sensor. The proposed pulsewidth modulation (PWM) technique is a hybrid method which consists of space vector modulation method and the PWM method without using null switching states. The former provides low current distortion; however, it is with narrower current reconstruction range. In contrast, the latter extends the current reconstruction range at the cost of higher current distortion. For the proposed method, in the measurable region of space vector modulation method, space vector modulation is used to reduce the current distortion. Moreover, as the modulation range is out of the measurable region, the PWM method without using null switching states is applied to extend the current reconstruction range. Furthermore, the current reconstruction limitation using only dc-link sensor is analyzed. The analysis shows that the reduction of PWM switching frequency and acquisition time can extend the current reconstruction range. Comparison of experimental results derived from a field-programmable gate array-based controlled inverter is included. It will be demonstrated that using the proposed hybrid PWM technique, the three-phase current signals of the inverter can be reconstructed even under very low modulation index range while providing low current harmonic distortion of inverter output.

Three‐phase step‐down AC/DC converter with sinusoidal pulse‐width modulation

A 750Ma,dual-Mode PWM/PFM Step-Down DC-DC Converter with High Efficiency

Pulse Density Modulated Three-phase Single-stage AC-AC System for Series Resonant Load with Low Grid Current Harmonics

Development Of A Three-Phase High Power Factor Multilevel Current-Source Rectifier

A ZCS AC/DC CONVERTER WITH HIGH POWER FACTOR BASED ON PWM CONTROL STRATEGY

Current-Feed Single-Switch Forward Resonant DC Transformer (DCX) with Secondary Diode-Clamping.

Control and Modulation of a Single-Phase AC/DC Converter with Smooth Bidirectional Mode Switching and Symmetrical Decoupling Voltage Compensation

Improved PWM Modulation Strategy for CHB Multilevel Converter

A Hybrid Three Phase Current Source Rectifier For High Power Application

Single-phase Direct AC-DC Bidirectional Converter Featuring Natural Power Factor Correction

A High Frequency Multiphase Modular Hybrid Transformerless DC/DC Converter for High-Voltage-Gain High-Current Applications

Isolated Single-Stage High Power Factor AC/DC Converter

Modified Harmonic Current Control and Load Range Extension Method for Single-Stage Isolated DCM Boost AC-DC Converter

A Single-stage Three-phase Isolated Bidirectional AC/DC Converter and Its SVPWM Algorithm

A Current-Fed Multiresonant Converter with Low Circulating Energy and Zero-Current Switching for High Step-Up Power Conversion

Single-Switch Step-Up/Down Three-Phase Rectifier with Sinusoidal Input Current

New Hybrid Pulsewidth Modulation Technique to Reduce Current Distortion and Extend Current Reconstruction Range for a Three-Phase Inverter Using Only DC-link Sensor

A Natural Soft-Switching Two-Level AC/DC/AC Power Converter

A Quasi-Square-Wave Modular Multilevel Resonant DC/DC Converter With ZCS and Current-Shaping Capacity for High Step-Ratio Application

A High-Frequency-Link Single-Phase PWM Rectifier