Abstract:The development of a flexible wearable piezoelectric power device has recently caught extensive attention, especially in making inorganic piezoelectric ceramics into polymers from a composite with excellent piezoelectric response. As inorganic piezoelectric fillers, an oriented polycrystal can improve the mechanical energy efficiency of piezoelectric nanogenerators. Herein, the two-dimensional BaTiO3-oriented polycrystals are prepared via a two-step hydrothermal process based on a topochemical conversion mechanism. Additionally, a high-performance piezoelectric nanogenerator was successfully fabricated using the polydimethylsiloxane (PDMS) polymer and BaTiO3-oriented polycrystals. The flexible piezoelectric nanogenerator with 30 wt % BaTiO3 exhibited optimal piezoelectric performance, with an output open-circuit voltage of 13.0 V and a short-circuit current of 200 nA under a periodic mechanical bend–release mode. More importantly, an effective power of approximately 2.6 μW was achieved at a low load resistance of 35 MΩ, suggesting a large potential for applications of electronic skins and self-powered devices. The device efficiently harvests biomechanical energy from human activities and exhibits stable output voltage and current of approximately 8 V and 150 nA, respectfully, demonstrating great promise as a wearable energy harvester. This work demonstrates that oriented nanocrystals in combination with a polymer matrix can lead to the design of high-efficiency piezoelectric nanogenerators that are particularly useful in artificial intelligence, soft robotics, and biomedical devices.The Supporting Information is available free of charge at https://pubs.acs.org/doi/10.1021/acssuschemeng.1c07875.XRD and FE-SEM of the KTLO and HTO crystals. Raman spectra of composite films. SEM-EDS mapping images of composite film. Piezoelectric coefficients (d33) of the composite films. P–E hysteresis loop for the BT ceramics and PDMS film. Output performance of the PENG devices with different BT weight fractions. Schematic diagram of the test circuit. Calculated results of the stress distribution. (PDF)This article has not yet been cited by other publications.

An eco-friendly BaTiO 3 /gelatin composite for flexible and reusable piezoelectric nanogenerators

The construction of BaTiO 3 -based core-shell composites for high-performance and flexible piezoelectric nanogenerators

Degradable flexible piezoelectric nanogenerator based on two-dimensional barium titanate nanosheets and polylactic acid

Piezoelectric Nanogenerators Based On BaTiO3/PDMS Composites for High-Frequency Applications

Interface induced performance enhancement in flexible BaTiO3/PVDF-TrFE based piezoelectric nanogenerators

Diphenylalanine-based degradable piezoelectric nanogenerators enabled by polylactic acid polymer-assisted transfer

Screen Printing of Surface-Modified Barium Titanate/Polyvinylidene Fluoride Nanocomposites for High-Performance Flexible Piezoelectric Nanogenerators

Polydimethylsiloxane/BaTiO3 Nanogenerators with a Surface-Assembled Mosaic Structure for Enhanced Piezoelectric Sensing

Mechanical Energy Harvesting and Specific Potential Distribution of a Flexible Piezoelectric Nanogenerator Based on 2-D BaTiO 3 -Oriented Polycrystals

Controllable Core-Shell BaTiO<sub>3</sub>@Carbon Nanoparticle-Enabled P(VDF-TrFE) Composites: A Cost-Effective Approach to High-Performance Piezoelectric Nanogenerators

Advancing High-Performance Piezoelectric Nanogenerators: Simple Electric Field Switching for Orientated and Aligned BaTiO 3 /PDMS Composite

Three-dimensional polymer-nanoparticle-liquid ternary composite for ultrahigh augmentation of piezoelectric nanogenerators

Fully Biodegradable Triboelectric Nanogenerators Based on Electrospun Polylactic Acid and Nanostructured Gelatin Films

Coral-like BaTiO3-Filled Polymeric Composites as Piezoelectric Nanogenerators for Movement Sensing

Flexible Composites with Rare-Earth Element Doped Polycrystalline Particles for Piezoelectric Nanogenerators

Enhanced Piezoelectric Energy Harvester by Employing Freestanding Single‐Crystal BaTiO3 Films in PVDF‐TrFE Based Composites

Flexible PVDF based piezoelectric nanogenerators

Flexible composites with Ce-doped BaTiO3/P(VDF-TrFE) nanofibers for piezoelectric device

A High Output Voltage Flexible Piezoelectric Nanogenerator Using Porous Lead-Free Knbo3 Nanofibers

Performance Improvement and Application of Degradable Poly-l-lactide and Yttrium-Doped Zinc Oxide Hybrid Films for Energy Harvesting

Integrated Nanospheres Occupancy-Removal and Thermoforming into Bulk Piezoelectric and Triboelectric Hybrid Nanogenerators with Inverse Opal Nanostructure