Effect of nozzle type on pulse-jet cleaning performance of ceramic filter tube

Qing Zhang,Dong Liu,Haiyan Chen,Minjie Wang,Chencheng Liang,Xuanyu Wu,Wang Li

DOI: https://doi.org/10.1016/j.apt.2023.104180

IF: 4.969

2023-10-01

Advanced Powder Technology

Abstract:The dust-cleaning efficiency of the ceramic filter tube is the key factor to determine the long-term stable operation of the dust removal system, and the type of nozzle significantly influences the performance. In this study, four types of nozzles (injection hole, sudden enlargement nozzle, tubular nozzle, and induction nozzle) are used to conduct comparative experimental study on the dust-cleaning effect of the ceramic filter tube. Using the schlieren technique find that the tubular and induction nozzles can improve the deviation angle of pulse-jet airflow. The injection parameters were set as an injection pressure of 200 kPa, an injection distance of 120 mm and a pulse width of 80 ms in the experiment. Using the sidewall pressure measurement system indicates that the integrated pressure of the sudden enlargement nozzle is the largest, but the uniformity is poor. The comprehensive pressure of the sudden enlargement nozzle is increased by 64.86 %, and the non-uniformity is reduced by 28.62 % compared with those of the induction nozzle. Using the visualization filtration cycle test system implies that the degree of damage and stripping state of the dust layer are directly proportional to the sidewall pressure. Moreover, it is found that the residual pressure drop changes exponentially with the dust removal quality under different nozzle types. These conclusions can help explain the mechanism of dust stripping and provide a basis for the selection of nozzles.

engineering, chemical