Abstract:Abstract Ion implantation is an important technique in semiconductor processing and has become a key technology for 4H-SiC devices. Today, aluminum (Al) implantations are routinely used for p-type contacts, p + -emitters, terminations and many other applications. However, in all crystalline materials, quite a few ions find a path along a crystal channel, so-called channeling, and these ions travel deep into the crystal. This paper reports on the channeling phenomenon during Al implantation into 4H-SiC, and in particular, the influence of a thin native oxide will be discussed in detail. The effects of thermal lattice vibrations for implantations performed at elevated temperatures will also be elucidated. 100 keV Al ions have been implanted along the [000-1] direction employing samples with 4° miscut. Before implantation, the samples have been aligned using the blocking pattern of backscattered protons. Secondary ion mass spectrometry has been used to record the Al depth distribution. To predict implantation profiles and improve understanding of the role of crystal structure, simulations were performed using the Monte-Carlo binary collision approximation code SIIMPL. Our results show that a thin surface layer of native oxide, less than 1 nm, has a decisive role for de-channeling of aligned implantations. Further, as expected, for implantations at elevated temperatures, a larger degree of de-channeling from major axes is present due to increased thermal vibrations and the penetration depth of channeled aluminum ions is reduced. The values for the mean-square atomic displacements at elevated temperatures have been extracted from experimental depth profiles in combination with simulations.

The effect of aluminium concentration on the resistance of Si3N4 to ion track formation

Effect of Al content on the structure and oxidation resistance of Y and Al modified silicide coatings prepared on Nb-Ti-Si based alloy

Crystallization of Amorphous SiC and Superhardness Effect in CrAlN/SiC Nanomultilayered Films

SiNx thickness dependent morphology and mechanical properties of CrAlN/SiNx nanomultilayers

Effect of Al Content on Microstructure and Mechanical Property of Nanocomposite TiAlSiN Thin Films

Influence of Si Content on Microstructure and Mechanical Properties of TiAlSiN Nanocomposite Coatings

Novel Sandwich Structure for Aluminum Induced Crystallization of Amorphous Silicon Thin Films at Low Temperature

Ion implantation effects on the microstructure, electrical resistivity and thermal conductivity of amorphous CrSi2 thin films

Latent Tracks of Swift Bi Ions in Si3N4

Influence of the aluminum content on structure and optical properties of Zr1-xAlxN films

Study of Ni/Si(100) solid-state reaction with Al addition

Influence of a thin amorphous surface layer on de-channeling during aluminum implantation at different temperatures into 4H-SiC

The effect of N+-implanted aluminum substrate on the mechanical properties of TiN films

Latent Tracks of Swift Heavy Ions in Сr23C6 and Y–Ti–O Nanoparticles in ODS Alloys

OXIDATION RESISTANCE OF Si3N4 CERAMICS WITH ALUMINUM ION IMPLANTATION

Effect Of Silicon On Grain Refinement Of Aluminum Produced By Electrolysis

Effects of silicon content on the structure and mechanical properties of (AlCrTaTiZr)–Si<sub><i>x</i></sub>–N coatings by reactive RF magnetron sputtering

The Effect of Al Interlayers on the Growth of AlN on Si Substrates by Metal Organic Chemical Vapor Deposition

The Role of Aluminum in the Crystallization of Cr–Si–Ni Resistive Films

Influence of underlayer roughness on the properties of Sc0.4Al0.6N thin films prepared via sputter deposition

Effect of Nitrogen on Crystallization Behavior and Electrical Properties of Cr-Si-Al Resistive Films