Abstract:Due to the growing electric vehicle market and new trends to reduce fuel consumption for a healthy environment, safe and reliable vehicles are desirable for reasons beyond EV and new technology. Although certain safety standards and legislation are in place and continuously improving but several concerns including battery safety, battery performance, vehicle structure, and battery design to be considered as these affect the overall reliability of Electric vehicles (EVs). Lithium-ion battery technology is considered a good solution to power electric vehicles but potential overheating due to stressful conditions such as mechanical abuse, overcharge, over-discharge, short circuit, and excessive heat from external environment gives rise to safety issues and the occurrence of one or more than one of these can lead to thermal runaway. In most cases, an electric short circuit is a necessary but not sufficient condition for the occurrence of thermal runaway after mechanical abuse. Chemistry of the cell, the resistance of separator to heat, size of the fractured part, and rate of heat transfer all play a role in processes leading to a thermal runaway, if the cell has not gone to thermal runaway right away it can still go into a slow process of electrochemical reaction, releasing gases that eventually could lead to a catastrophic event. This abstract investigates the mechanical behaviour of the separator in the LiCoO2/Graphite cylindrical 18650 cells. Internal short circuit (ISC) behaviour, strain rate dependency, and electrochemical status of the cells (i.e. SOC dependency) are studied to understand failure patterns. Furthermore, a simple and effective constitutive model for the separator layer is formed, facilitating further mechanical analysis and numerical simulation of lithium-ion battery study. The occurrence of ISC is investigated by jellyroll deformation where the casing is removed, and quasi-static load is applied. The numerical simulation model is developed to further investigate sequential structural failures and temperature changes. Simulation results showed good accuracy with experimental results and are useful to predict structural failure of cells. The number of failures including electrolyte leakage, change in shape, sudden voltage drop/temperature rise, and gas venting are observed.

Internal short circuit and thermal runaway evolution mechanism of fresh and retired lithium-ion batteries with LiFePO4 cathode during overcharge

Analysis of Internal Short Circuit and Thermal Runaway of Li-Ion Battery Due to Mechanical Abuse

Dynamic overcharge investigations of lithium ion batteries with different state of health

Thermal behavior and failure mechanisms of 18650 lithium ion battery induced by overcharging cycling

Comparative Study on Aging and Thermal Runaway of Commercial LiFePO4/graphite Battery Undergoing Slight Overcharge Cycling

Thermal runaway and fire behaviors of lithium iron phosphate battery induced by over heating

Thermal Runaway Evolution of a 280 Ah Lithium-Ion Battery with LiFePO4 As the Cathode for Different Heat Transfer Modes Constructed by Mechanical Abuse

Heat generation and thermal runaway mechanisms induced by overcharging of aged lithium-ion battery

Understanding of Stress‐Driven Internal Short Circuit Mechanisms in Lithium‐Ion Batteries with High SOCs

Coupling Effect of State of Charge and Loading Rate on Internal Short Circuit of Lithium-Ion Batteries Induced by Mechanical Abuse

Comparison of the Overcharge Behaviors of Lithium-ion Batteries under Different Test Conditions

Thermal runaway and fire behaviors of a 300 Ah lithium ion battery with LiFePO4 as cathode

Thermal Behavior and Failure Mechanism of Lithium Ion Cells During Overcharge under Adiabatic Conditions

Investigation on Topographic, Electrochemical and Thermal Features of Aging Lithium-Ion Cells Induced by Overcharge/over-Discharge Cycling

Experimental Study of Thermal Runaway Process of 18650 Lithium-Ion Battery

Study on Thermal Safety of the Overcharged Lithium-Ion Battery

Comprehensive Analysis on Aging Behavior and Safety Performance of LiNixCoyMnzO2/graphite Batteries after Slight Over-Discharge Cycle

Comprehensive Investigation of a Slight Overcharge on Degradation and Thermal Runaway Behavior of Lithium-Ion Batteries

Thermal Safety Study of Li‐ion Batteries under Limited Overcharge Abuse Based on Coupled Electrochemical‐thermal Model

Investigation on Thermal Runaway of Li-Ion Cells Based on LiNi1/3Mn1/3Co1/3O2

Evolution of the morphology, structural and thermal stability of LiCoO2 during overcharge