Abstract:As one of the most efficient, low-cost, and readily available electrocatalysts for oxygen evolution reaction (OER) in alkaline environments, the nickel-iron electrocatalyst is of great significance to commercial water splitting. In this study, NiFe-layered double hydroxide loaded on nickel foam (NiFe-LDH/NF) was synthe-sized via a simple one-step hydrothermal method, whose OER catalytic performance could be successfully optimized by further electrochemical reconstruction. The results show that NF is an effective precursor to loading crystallized Ni(OH)2 nanoparticles during hydrothermal synthesis, leading to the generation of high-performance NiOOH during OER reconstruction. Under the optimal Ni:Fe feeding ratio, Ni2Fe1-LDH/NF requires an ultra-low OER overpotential of 239 mV at 50 mA cm-2 and 260 mV at 100 mA cm-2 , whose Tafel slope is only 64.1 mV dec-1. Impressively, Ni2Fe1-LDH/NF also achieves an ultra-low voltage of 1.44 V at 10 mA cm-2 with excellent long-term stability for overall water splitting. Unlike the previous viewpoint that only Ni species dominate surface reconstruction of NiFe-LDH, in this article the decisive influence related to Fe species on the reconstruction layers' activity and stability is confirmed by electrochemistry, Raman, and XPS analysis during reconstruction process. During OER reconstruction, the surface Ni:Fe ratios can be "self -adaptively" regulated to an appropriate region, thus the stable reconstruction layers rich in NiOOH can be formed as the protective shells for NiFe-LDH. Furthermore, such "self-adaptive" reconstruction, assisted with appropriate initial Ni:Fe feeding ratios, can also stimulate more Ni3+ active sites for OER, benefitting the outstanding catalytic performance of NiFe-LDH/NF for overall water splitting and prospective large-scale application.(c) 2022 Elsevier B.V. All rights reserved.

Deepening surface reconstruction on anodized nickel mesh boosts oxygen evolution under industrial alkaline conditions

In Situ Construction of Ni Enriched Porous NiAl As Long-Lived Electrode for Hydrogen Evolution at High Current Densities

Manipulating the Electrochemical Surface Reconstruction of Nickel Foam Via Electrolyte Engineering for Efficient Oxygen Evolution Reaction at Industrial-Level Current Density

Self-adaptively Electrochemical Reconstruction of NiFe-layered Double Hydroxide on Ni Foam for High-Performance Water Splitting

In-situ generation of Ni-CoOOH through deep reconstruction for durable alkaline water electrolysis

Crystalline-dependent surface reconstruction at low applied potential region for enhanced oxygen evolution reaction

Enhancing Oxygen Evolution Reaction Performance: Electrochemical Activation of the Biphasic CoNi/Zn(Fe,Al,Cr) 2 O 4 via Controlled Aluminum Leaching Facilitated Surface Reconstruction

Dynamic self-optimization of hierarchical NiAl architecture catalysing oxygen evolution reaction in alkaline water electrolysis

In Situ Self‐Assembled 200 nm‐Depth Highly Active Layer Non‐Precious Metals Catalyst for Industrial Water Electrolysis

Surface reconstruction of NiFe layered double hydroxides by S2- corrosion for efficient oxygen evolution

Surface reconstruction of NiFe layered double hydroxides by S 2- corrosion for efficient oxygen evolution

Heterolayered Ni-Fe Hydroxide/Oxide Nanostructures Generated on a Stainless-Steel Substrate for Efficient Alkaline Water Splitting

Surface reconstruction enables outstanding performance of Fe2O3/Ni(OH)2 nanosheet arrays for ultrahigh current density oxygen evolution reaction

Deeply Reconstructed NiFe Layered Double Hydroxide Nanosheets for an Efficient Oxygen Evolution Reaction

Utilizing Reconstruction Achieves Ultrastable Water Electrolysis

Surface Reconstruction of Co‐based Catalysts for Enhanced Oxygen Evolution Activity in Anion Exchange Membrane Water Electrolysis

Self-supported Ni/NiO heterostructures with controlled reduction protocol for enhanced industrial alkaline hydrogen evolution

In-situ Self-Reconstruction of Ni–Fe–Al Hybrid Phosphides Nanosheet Arrays Enables Efficient Oxygen Evolution in Alkaline

Surface Reconstruction of an FeNi Foam Substrate for Efficient Oxygen Evolution

Elevated Water Oxidation by Cation Leaching Enabled Tunable Surface Reconstruction

Immobilizing Low‐Cost Metal Nitrides in Electrochemically Reconstructed Platinum Group Metal (PGM)‐Free Oxy‐(Hydroxides) Surface for Exceptional OER Kinetics in Anion Exchange Membrane Water Electrolysis