Abstract:Controlling the dispersion characteristic of metasurfaces (or metalenses) along a broad bandwidth is of great importance to develop high-performance broadband metadevices. Different from traditional lenses that rely on the material refractive index along the light trajectory, metasurfaces or metalenses provide a new regime of dispersion control via a sub-wavelength metastructure, which is known as negative chromatic dispersion. However, broadband metalenses design with high-performance focusing especially with a reduced device dimension is a significant challenge in society. Here, we design, fabricate, and demonstrate a broadband high-performance diffractive-type plasmonic metalens based on a circular split-ring resonator metasurface with a relative working bandwidth of 28.6%. The metalens thickness is only 0.09 λ 0 ( λ 0 is at the central wavelength), which is much thinner than previous broadband all-dielectric metalenses. The full-wave simulation results show that both high transmissive efficiency above 80% (the maximum is even above 90%) and high average focusing efficiency above 45% (the maximum is 56%) are achieved within the entire working bandwidth of 9–12 GHz. Moreover, an average high numerical aperture of 0.7 ( NA =0.7 ) of high-efficiency microwave metalens is obtained in the simulations. The broadband high-performance metalens is also fabricated and experimental measurements verify its much higher average focusing efficiency of 55% (the maximum is above 65% within the broad bandwidth) and a moderate high NA of 0.6. The proposed plasmonic metalens can facilitate the development of wavelength-dependent broadband diffractive devices and is also meaningful to further studies on arbitrary dispersion control in diffractive optics based on plasmonic metasurfaces.

Broadband optical power limiter metalens

Broadband Achromatic Polarization Insensitive Metalens Design in the Near-Infrared Spectrum

Broadband Optical Absorption Based On Single-Sized Metal-Dielectric-Metal Plasmonic Nanostructures With High-Epsilon '' Metals

High-efficiency, Linear-Polarization-multiplexing Metalens for Long-Wavelength Infrared Light.

A Broadband High-Efficiency Plasmonic Metalens with Negative Dispersion Characteristic

Broadband achromatic metalens for linearly polarized light from 450 to 800 nm

High-efficiency broadband achromatic metalens in the visible

Sub-wavelength Focusing Based on All-Dielectric Polarization-Independent Metalens

Reflective Optical Limiters: Ultrathin Broadband Reflective Optical Limiter (laser Photonics Rev. 15(6)/2021)

A broadband achromatic metalens for focusing and imaging in the visible

An Optical Limiter for Visible Light of Lasers

A high numerical aperture, polarization-insensitive metalens for long-wavelength infrared imaging

Design of broadband near-infrared metalens with polarization-insensitive arbitrarily controlled dispersion

Ultrathin broadband reflective optical limiter

Broadband achromatic mid-infrared metalens with polarization-insensitivity

Broadband Achromatic Metalens in the Long-Wave Infrared Regime

4H‐SiC Metalens: Mitigating Thermal Drift Effect in High‐Power Laser Irradiation

Broadband Achromatic Metalens in the Visible Light Spectrum Based on Fresnel Zone Spatial Multiplexing

Broadband achromatic metalens and meta-deflector based on integrated metasurface

Photonic Crystal Fiber Metalens

Reflective nonlinear optical limiter design based on coupled Tamm plasmon polaritons and optical Kerr effect