Abstract:Solar-driven interfacial evaporation for clean water generation has drawn significant attention as a promising and environmentally friendly avenue to tackle the global issue of water scarcity. The collected condensate can be free from most pollutants and impurities of diverse undrinkable water sources, such as heavy metals, organic dyes, minerals, and salts. However, when water is contaminated by volatile organic compounds (VOCs), this approach is ineffective because VOCs also evaporate and even can be enriched in the condensate. Here, we demonstrate TiO2-loaded CuO nanowire-covered Cu foam (TiO2-CuO-Cu-foam) for efficient solar-driven interfacial evaporation and synchronous removal of VOCs via photocatalytic degradation. The TiO2-CuO-Cu-foam nanoarchitecture possesses high solar absorption, quasi-one-dimensional water pathway, super-hydrophilicity for ultrafast water transport, long-term stability, and potential for cost-effective and scalable production for both VOC removal and desalination, meeting World Health Organization potable water standards. Our TiO2-CuO-Cu-foam evaporator simultaneously demonstrates high solar evaporation efficiency of 86.6% and efficiency of 80.0% for the removal of VOCs under one sun (i.e., 1 kW m(-2)). This result may open new opportunities for energy-efficient, clean water generation from real-world water sources using solar energy. Novelty Statement TiO2-loaded CuO nanowire-covered Cu foam (TiO2-CuO-Cu-foam) was obtained through the facile and green synthesis process. The TiO2-CuO-Cu-foam nanoarchitecture possesses high solar absorption due to surface nanostructuring, quasi-one-dimensional water pathway for localized thermal management, super-hydrophilicity for ultrafast water transport, TiO2-CuO heterojunction for enhanced photodegradation of VOCs without consumption of chemical reagents, long-term stability, and potential for cost-effective and scalable production. The nanoarchitecture is employed for clean water generation from real-world water sources.

Interfacial solar vapor generation using sawdust hydrochar/titanium dioxide composite as photothermal conversion material

Carbonized sawdust/barium titanate composite solar absorber for solar driven seawater desalination

Ti3C2/PVDF Membrane for Efficient Seawater Desalination Based on Interfacial Solar Heating

Hydrophobic Lithiated Titania Floating Film for Efficient Solar-Driven Water Evaporation

Multi-Shelled Hollow Porous Carbon Nanospheres-Based Evaporator for Highly Efficient Solar-Driven Desalination

Interfacial Assembled Hydrogel Evaporator for Highly Efficient Thermal Management and Photothermal Coupled Water Splitting Reaction

Micro-flower like 1T-2H-MoS2@ZIF8@C composites for efficient interfacial solar vapor generation

Hydrogel-based photothermal evaporator for efficient solar desalination and synergistic removal of volatile organic compounds

Hydrothermally Derived Hydrochar from Waste Sawdust for Solar Vapor Generation

Hybrid nanoarchitectonics of carbon/titanium carbide integrated hydrogel/melamine foam for highly efficient solar steam and thermoelectric power generation

Insight into the Charge-Ratio-Tuned Solar Vapor Generation of Polyion Complex Hydrogel/Coal Powder Composites

Self-Suspended Photothermal Microreactor for Water Desalination and Integrated Volatile Organic Compound Removal

A super-hydrophilic honeycomb activated carbon evaporator for simultaneous salt rejection and VOCs removal during solar-driven seawater desalination

<p>Interfacial solar steam generation by sawdust coated with W doped VO2</p>

Interfacial Photothermal Heat Accumulation for Simultaneous Salt Rejection and Freshwater Generation; an Efficient Solar Energy Harvester

Recent advances in carbon‐based materials for solar‐driven interfacial photothermal conversion water evaporation: Assemblies, structures, applications, and prospective

High‐performance Water Purification and Desalination by Solar‐driven Interfacial Evaporation and Photocatalytic VOC Decomposition Enabled by Hierarchical TiO 2 ‐cuo Nanoarchitecture

Bi-functional carbon foam/TiO2 composite absorber for solar steam generation and photocatalytic purification

SiC–C Composite as a Highly Stable and Easily Regenerable Photothermal Material for Practical Water Evaporation

Fumed Nano-Silica Modified PVA-chitosan Composite Hydrogel with Janus Structure for Solar-Driven Interfacial Evaporation

A 3D Hemispheric Steam Generator Based on An Organic–Inorganic Composite Light Absorber for Efficient Solar Evaporation and Desalination