Abstract:The oil industry is facing substantial environmental challenges, especially in managing waste streams such as Oilfield Produced Water (OPW), which represents a significant component of the industrial ecological footprint. Conventional treatment methods often fail to effectively remove dissolved oils and grease compounds, leading to operational difficulties and incomplete remediation. Electrochemical oxidation (EO) has emerged as a promising alternative due to its operational simplicity and ability to degrade pollutants directly and indirectly, which has already been applied in treating several effluents containing organic compounds. The application of EO treatment for OPW is still in an initial stage, due to the intricate nature of this matrix and scattered information about it. This study provides a technological overview of EO technology for OPW treatment, from laboratory scale to the development of large-scale prototypes, identifying design and process parameters that can potentially permit high efficiency, applicability, and commercial deployment. Research in this domain has demonstrated notable rates of removal of recalcitrant pollutants (>90%), utilizing active and non-active electrodes. Electro-generated active species, primarily from chloride, play a pivotal role in the oxidation of organic compounds. However, the highly saline conditions in OPW hinder the complete mineralization of these organics, which can be improved by using non-active anodes and lower salinity levels. The performance of electrodes greatly influences the efficiency and effectiveness of OPW treatment. Various factors must be considered when selecting the electrode material, such as its conductivity, stability, surface area, corrosion resistance, and cost. Additionally, the specific contaminants present in the OPW, and their electrochemical reactivity must be considered to ensure optimal treatment outcomes. Balancing these considerations can be challenging, but it is crucial for achieving successful OPW treatment. Active electrode materials exhibit a high affinity for chloride molecules, generating more active species than non-active materials, which exhibit more significant degradation potential due to the production of hydroxyl radicals. Regarding scale-up, key challenges include low current efficiency, the formation of by-products, electrode deactivation, and limitations in mass transfer. To address these issues, enhanced mass transfer rates and appropriate residence times can be achieved using flow-through mesh anodes and moderate current densities, which have proven to be the optimal configuration for this process.

Electrochemical reclamation of oil sands process water: Two and three-dimensional electrode configuration systems structured with different anode materials

Electrochemical degradation of dissolved organic matters in oil sands process water using continuous-flow packed bed electrode reactor

Electrochemical treatment of anionic surfactants in synthetic wastewater with three-dimensional electrodes.

Electrochemical Activation of Sulfate by BDD Anode in Basic Medium for Efficient Removal of Organic Pollutants

Treatment of High-Salinity Reverse Osmosis Concentrate by Electrochemical Oxidation on BDD and DSA Electrodes

Comparative Performance of Ten Electrodes in Electro‐Fenton Process for Removal of Organic Pollutants from Water

Principles, challenges and prospects for electro-oxidation treatment of oilfield produced water

Unique Electrochemical System for in Situ SO4− Generation and Pollutants Degradation

UVA LED-assisted breakdown of persulfate oxidants for the treatment of real oil sands process water: Removal of naphthenic acids and evaluation of residual toxicity

Electro-Induced Carbon Nanotube Discrete Electrodes for Sustainable Persulfate Activation

Photocatalytic treatment of diverse contaminants of potential concern in oil sands process-affected water

Sludge-based activated biochar for adsorption treatment of real oil sands process water: Selectivity of naphthenic acids, reusability of spent biochar, leaching potential, and acute toxicity removal

Degrade Methyl Orange by a Reverse Electrodialysis Reactor Coupled with Electrochemical Direct Oxidation and Electro-Fenton Processes

Pretreatment of hypersaline and high-organic wastewater with a three-dimensional electrocatalytic system: a pilot-scale study

Decoupled Oxidation Process Enabled by Atomically Dispersed Copper Electrodes for In-Situ Chemical Water Treatment

A Light Touch: Solar Photocatalysis Detoxifies Oil Sands Process-Affected Waters Prior to Significant Treatment of Naphthenic Acids

Packed OV-SnO2-Sb Bead-Electrodes for Enhanced Electrocatalytic Oxidation of Micropollutants in Water.

Application of electro oxidation process for treating wastewater from petrochemical with mixed metal oxide electrode

Electrochemical oxidation of surfactants as an essential step to enable greywater reuse

Electrocatalytic Oxidation for Organic Wastewater: Recent Progress in Anode Material, Reactor, and Process Combination

Effects of Twelve Sodium Dodecyl Sulfate (sds) on Electro-Catalytic Performance and Stability of Pbo2 Electrode