Abstract:Corrosion is a major source of degradation in heritage metal objects, and any remedial measures are subject to a strong (Western) ethic that favors conservation as opposed to restoration. Accordingly, major scientific challenges exist for developing appropriate treatment methods to stabilize and protect artifacts after they are recovered from an archaeological site, both before and during their display or storage in a museum. Because inappropriate treatments can cause irreversible damage to irreplaceable objects, it is crucial that the chemical processes involved are fully understood and characterized before any preservation work is undertaken. In this regard, large infrastructural facilities such as synchrotrons, neutron sources, and particle accelerators provide a wealth of analytical possibilities, unavailable in smaller scale laboratories. In general, the intensity of the radiation available allows measurements on a short time scale or with high spatial resolution (or both), so heterogeneous changes induced by a chemical process can be recorded while they occur. The penetrative nature of the radiation (e.g., X-rays, protons, or neutrons) also allows a sample to be studied in air. If necessary, complete artifacts (such as paintings or statuettes) can be examined. In situ analysis in a controlled environment, such as a liquid or corrosive atmosphere, also becomes an exciting possibility. Finally, there are many complementary techniques (local atomic structure or crystal structure determination, macroscopic 3-D imaging (tomographies), imaging chemical analysis, and so on) so the many distinct details of a problem can be thoroughly explored. In this Account, we discuss the application of this general philosophy to studies of corrosion and its prevention in cultural heritage metals, focusing on our recent work on copper alloys. More specifically, we use synchrotron-based techniques to evaluate the use of corrosion potential measurements as a possible monitoring method for copper-based objects recovered from marine environments. The extraction of chlorides from such artifacts is a process that must take place before the artifacts are put on display or stored, because air exposure of untreated metal will result in severe damage or loss in as little as a few weeks. Chloride is removed by soaking the artifact for up to two years in tap water or dilute sodium sesquicarbonate, with regular solution changes. Our research supports the effectiveness of this treatment for thin nantokite (copper(I) chloride) layers, but it raises questions for copper hydroxychlorides (atacamite and paratacamite), especially when these minerals are trapped in fissures. Electrochemical parameters such as the corrosion potential are shown to be insensitive to the physical presence of large hydroxychloride coverages if they overlie a cuprite (Cu(2)O) layer. X-ray absorption spectroscopy proves to be a good monitor for the chloride in solution over the working electrode, whereas X-ray diffraction offers the potential for real-time measurement of the surface chloride composition. In principle, the two techniques together offer the possibility of monitoring surface and fluid levels simultaneously.

Characterization of corrosion products on contemporary bronze artwork by using voltammetry of microparticles and PCA

Combined Scanned Macro X-Ray Fluorescence and Reflectance Spectroscopy Mapping on Corroded Ancient Bronzes

Correlation between Voltammetry of Immobilized Particles and Mott‐Schottky analysis of metal corrosion patinas

Organic Patinas on Small Historical Bronzes: From Mock-Ups to Actual Artworks

Effects of cleaning procedures on the long-term corrosion behavior of bronze artifacts of the cultural heritage in outdoor environment

Mott–Schottky Analysis of Historical and Archaeological Copper–based Objects

The coordinated use of synchrotron spectroelectrochemistry for corrosion studies on heritage metals

A morphological and chemical classification of bronze corrosion features from an Iron Age hoard (Tintignac, France): the effect of metallurgical factors

Reproducing bronze archaeological patinas through intentional burial: A comparison between short- and long-term interactions with soil

Study of corrosion in archaeological gilded irons by Raman imaging and a coupled scanning electron microscope-Raman system

Unlocking the organic residues preserved in the corrosion from the Pewsey Hoard vessels

Correlation between lead isotope analysis and solid-state electrochemistry for determining the provenance of archaeological bronze

Non‐invasive surface analysis of ancient bronze arrowheads with scanning electron microscopy and X‐ray powder diffractometry

Protective treatments for copper alloy artworks: preliminary studies of sodium oxalate and limewater effectiveness against bronze disease

Scanning Electrochemical Cell Microscopy: A Powerful Method to Study the Intergranular Corrosions of Archaeological Silver Artifacts

In-situ measurement of electrochemical activity related to filiform corrosion in organic coated steel by scanning vibrating electrode technique and scanning micropotentiometry

[Using Raman spectrum analysis to research corrosive productions occurring in alloy of ancient bronze wares]

Modeling solid-state reaction processes: application for the archaeometric study of potteries from Venus Fisica Temple in Pompeii (Italy)

Early Stages of Metal Corrosion in Coastal Archaeological Sites: Effects of Chemical Composition in Silver and Copper Alloys

A Technical Examination of the Corrosion and Microstructural Features of Copper Alloy Artifacts from the Byzantine Period at Khirbet Yajuz, Jordan

Corrosion Mechanisms and Conservation Strategies for Marine Recovered Bronze Artifacts: Insights from the Nanhai No. 1 Shipwreck