Abstract:In this paper, we present a highly efficient, cost-effective, and widely applicable functionalized SiO2/TiO2-polymer based coating to fabricate a translucent, fluorine-free, chemically stable, photocatalytic active, self-healable superhydrophobic coating, which consisted of two mixed functionalized particles (MFP) and polydimethylsiloxane (PDMS) in a proper ratio. Both SiO2 and TiO2 powders were functionalized with PDMS brushes to achieve superhydrophobicity. To maximally optimize its properties, including superhydrophobicity, transparency, and photocatalytic activity, the ratios between MFP with PDMS were carefully studied and optimized. Glass slides coated with this mixed coating (MC) showed translucence with a transparency of 75%. It also presented superior photocatalytic activity and strong UV resistance that could repeatedly degrade organic oil pollutants as many as 50 times, while still maintaining superhydrophobicity even upon exposure to UV light with a high intensity of 80 mW/cm2 for as long as 36 h. When low-surface-tension oils such as dodecane wetted the MC surface, it showed excellent slippery performance and could quickly repel strong acid/alkali/hot water and even very corrosive liquids such as aqua regia. MC achieved extremely stable underoil superhydrophobicity (toward liquids including water, strong acid and base, hot water, etc.) and self-cleaning properties, not only in oils at room temperature but also in a scalded oil environment. Moreover, MC showed self-healable performance after recycled plasma treatment. The stainless steel mesh coated with MC was also used to highly efficiently separate oil-water mixtures. Moreover, harsher liquids including strong acid/alkali solutions/hot water/ice water-oil mixtures could also be successfully separated by the coated mesh. This coating was believed to largely broaden both indoor and outdoor applications for superhydrophobic surfaces.

Hybrid solvent-free nanofluids mediated multifunctional PMMA with transparent, lubricant, and anti-fouling properties

Carbon Nanotubes Noncovalently Functionalized by an Organic-Inorganic Hybrid: New Building Blocks for Constructing Superhydrophobic Conductive Coatings

Silsesquioxanes-Based Nanolubricant Additives with High Thermal Stability, Superhydrophobicity, and Self-cleaning Properties

Fabrication of MXene@Fe 3 O 4 @PNA composite with photothermal effect as water-based lubricant additive

Multifunctional and fluorine-free superhydrophobic composite coating based on PDMS modified MWCNTs/ZnO with self-cleaning, oil-water separation, and flame retardant properties

Coupled Superhydrophilic PMMA Film with Inverted Pyramid Microstructures for Antireflection and Antifogging Properties

The Fabrication of High-Hardness and Transparent PMMA-Based Composites by an Interface Engineering Strategy.

A New Strategy for Simultaneously Improved Flame Retardancy, Thermal Properties, and Scratch Resistance of Transparent Poly(methyl Methacrylate)

Cellulose nanofibril aerogels reinforcing polymethyl methacrylate with high optical transparency

Solvent-free Zirconia Nanofluids/silica Single-Layer Multifunctional Hybrid Coatings

Influence of Fluorine-Containing Monomer Content on the Hydrophobic and Transparent Properties of Nanohybrid Silica Polyacrylate Coating Materials

Transparent and Strong Polymer Nanocomposites Generated from Pickering Emulsion Gels Stabilized by Cellulose Nanofibrils.

Preparation of a novel SiO2/PMMA nanocomposite with high transparency, thermal stability, and superior surface hardness via gamma‐radiation polymerization

Photocatalytically Stable Superhydrophobic and Translucent Coatings Generated from PDMS-Grafted-SiO2/TiO2@PDMS with Multiple Applications

Preparation and tribological behaviour of poly(methyl methacrylate) (PMMA) microcapsules containing friction modifiers

Enhanced Thermal Properties and Flame Retardancy of a Novel Transparent Poly(methyl Methacrylate)-Based Hybrid Prepared by the Sol–Gel Method

Robust cellulose nanofibrils reinforced poly(methyl methacrylate)/polystyrene binary blend composites with pebble‐shaped structure using Pickering emulsion gel

Interfacial Distribution of PMMA-grafted MWCNTs in Immiscible Blends for Improved Electrical Conductivity

Novel concept of nano-additive design: PTFE@silica Janus nanoparticles for water lubrication

Sustainable Manufacturing of Multifunctional Fluorine-Free Superslippery Flexible Surfaces

A Novel Method for Preparing Silver/poly(siloxane‐b‐methyl Methacrylate) Nanocomposites with Multiple Properties in the DMF‐toluene Mixture Solvent