Abstract:Comprehension of wet particle behavior is of great importance in science and engineering. In the past two decades, modeling and simulation for wet particles have been extensively studied because of their various industrial applications. The discrete element method (DEM) is extensively employed to simulate the wet particle behavior. To calculate the wet particle behavior, several capillary force models have been developed so far. Roughly speaking, the capillary force models are classified into two types, namely, the analytical model and the geometrical approximation model. The analytical model is most frequently employed because of its simplicity, though only a small amount of the liquid volume is applicable. The geometrical approximation model has significant advantages because of no theoretical limitation of the liquid volume as well as its high accuracy. Incidentally, the geometrical approximation model usually expresses the liquid bridge shape by the toroidal approximation. However, validation tests for the geometrical approximation model have hardly been performed due to difficulty in incorporating the complex algorithm into the DEM. From the background, this paper aims to prove the superiority and adequacy of the geometrical approximation model in the DEM simulation for wet particles. First, the superiority of the geometrical approximation model to the analytical model is examined in a two-body system. Afterward, the following two types of validation tests are performed: granular collapse and wet powder mixing in a twin-screw kneader. In the granular collapse, the liquid content is set to be less than 4 vol. %. In the twin-screw kneader system, the liquid content is more than 5 vol. %. Through the validation tests, the adequacy of the geometrical approximation model in the DEM is proved because of the agreement between the computational and experimental results in the above systems. Consequently, this study will significantly contribute to a better understanding of wet particle behavior in science and engineering.

Validation of Flow Models as New Simulation Approach for Parcel Handling in Bulk Mode

CFD–DEM Simulation of Pneumatic Conveying in a Horizontal Channel

Validation of Model Predictions of Pore-Scale Fluid Distributions During Two-Phase Flow

Discrete Element Method Simulations for Complex Granular Flows

An Improved Computational Fluid Dynamics-Discrete Bubble Model for Multiphase Bubble Flow Simulation with a Wide Grid/bubble Size Ratio

Validation and evaluation of the CPFD modeling of dense particle flow velocity: Taking particle flow around an obstacle as an example

Validation Method for a Multimodal Freight Transport Model Exploiting Floating Car Data

Monolithic 3D numerical modeling of granular cargo movement on bulk carriers in waves

Numerical Simulations of Liquid-Solid Flows in A Vertical Pipe by MPS-DEM Coupling Method

A simulation approach for aircraft cargo loading considering weight and balance constraints

On the autonomous validation and comparison of particle models for a Newtonian laminar flow mixing model using PEPT

Modeling of Bubbly Flow using a Combined Volume of Fluid and Discrete Bubble Model: Investigation on Interphase Forces

Microsimulation Model for Analysis of Traffic Flow in Container Port

CFD-DEM modelling and simulation of pneumatic conveying: A review

Toward Data-Driven and Multi-Scale Modeling for Material Flow Simulation: Characteristic Analysis of Modeling Methods

State of the Art on Two-Phase Non-Miscible Liquid/Gas Flow Transport Analysis in Radial Centrifugal Pumps Part C: CFD Approaches with Emphasis on Improved Models

Validation study on a toroidal approximation-based capillary force model in the discrete element method simulation

On the validation of DEM and FEM/DEM models in 2D and 3D

Convective drying of wood chips: Accelerating coupled DEM-CFD simulations with parametrized reduced single particle models

A Dual Domain Method for 3-D Flow Simulation

Verification of coarse-grained CFD-DEM method in multiple flow regimes