Influence of calcination temperature on calcined carbide slag assisted biomass pyrolysis

Xu Chen,Shujuan Li,Wei Chen,Yingquan Chen,Hanping Chen,Haiping Yang
DOI: https://doi.org/10.1016/j.fuproc.2022.107339
IF: 8.129
2022-09-01
Fuel Processing Technology
Abstract:Biomass pyrolysis over CaO produced from the calcination of precursors is a prospective method for upgrading pyrolysis products while also lowering CO2 emissions. However, the structure-activity relationship of CaO in biomass pyrolysis process is rarely reported. In this study, cotton stalk pyrolysis over CaO produced from carbide slag was conducted, and the effect of calcination temperature (650–950 °C) on the structure of CaO and its performance in biomass pyrolysis process was thoroughly explored. Results showed that decreasing the calcination temperature would inhibit the sintering of CaO crystals, and thus CaO obtained at low calcination temperature (650 °C) showed small crystal size (43 nm) and strong basicity, resulting in a high CO2 fixation (0.146 g/g CaO) and LHV of pyrolysis gas (18.95 MJ/m3). Meanwhile, with the calcination temperature increasing from 650 °C to 950 °C, the content of acids in bio-oil increased significantly from 17.89% to 32.30%, and that of hydrocarbons in bio-oil decreased noticeably from 11.47% to 5.21%, indicating the decrease of bio-oil quality. Overall, the calcination temperature of 650 °C is more favorable for CO2 fixation and pyrolysis products upgrading.
energy & fuels,engineering, chemical,chemistry, applied
What problem does this paper attempt to address?