Abstract:The development and utilization of biomass play a vital role in reducing fossil fuel dependency and mitigating greenhouse gas emissions. High-temperature pyrolysis provides a promising route for converting biomass into valuable products without tar formation. Kinetic models are essential for understanding biomass pyrolysis processes, aiding reactor design and optimization. In this study, rice husk (RH) and corn straw (CS) are selected, which exhibit significant differences in ash content but are widely present. Pyrolysis is performed using a thermogravimetric analyzer coupled with a mass spectrometer (TGA-MS). The results show a rapid decrease in solid residue oxygen content at elevated temperatures, which stabilized after reaching 900°C, accounting for about 8–10%. MS quantification indicates increased release of H2O and CO during this stage. Fourier transform infrared spectroscopy (FTIR) analysis on the biochar unveils that this phenomenon is attributed to the stretching vibration of C-O bonds and the conversion of -OH groups. The remaining oxygen primarily exists as carbonyl and carboxyl groups. Subsequently, the CRECK-S-B biomass pyrolysis kinetic model is updated, specifically targeting the transformation mechanism of oxygen-containing solids at high temperatures to improve the prediction of biochar yield and elemental composition. The relative error of oxygen content prediction is less than 10%. The accuracy of the model is validated through experimental data and an extensive literature database, leading to the establishment of a comprehensive database. The updated model demonstrates significantly enhanced prediction accuracy for pyrolysis temperatures above 800°C, expanding its applicability range. Moreover, it achieves an accuracy rate exceeding 80% for char yield and elemental content in the temperature range of 200–1000°C, including torrefaction conditions. It provides a theoretical foundation for the effective utilization of high-temperature biochar, offers a novel insight into biomass thermochemical conversion, and contributes to the sustainable development of biomass energy.

Effect of pyrolysis temperature on blast furnace injection performance of biochar

Comprehensive Study on the Feasibility of Pyrolysis Biomass Char Applied to Blast Furnace Injection and Tuyere Simulation Combustion

Effect of Pyrolysis Temperature on Characteristics of Biomass Char and Coal Char

Gas Emissions from Blends of Bituminous Coal and Biomass Chars under Different Pyrolysis Conditions

Impact of High-Temperature Biomass Pyrolysis on Biochar Formation and Composition

The effect of biomass pyrolysis temperature on the performance of biochar-fed molten hydroxide direct carbon fuel cells

On the Self-Heating Behavior of Upgraded Biochar Pellets Blended with Pyrolysis Oil: Effects of Process Parameters

Study on the Effect of Pyrolysis Conditions on the Combustion Behavior and Char Structure Evolution.

Numerical investigation of the influence of particle shape, pretreatment temperature, and coal blending on biochar combustion in a blast furnace

Feedstock and pyrolysis temperature influence biochar properties and its interactions with soil substances: Insights from a DFT calculation

Experimental study on the co-firing and NOx emission characteristics of bituminous coal and its medium temperature pyrolysis char

Cross-upgrading of biomass hydrothermal carbonization and pyrolysis for high quality blast furnace injection fuel production: Physicochemical characteristics and gasification kinetics analysis

Effect of high-temperature pyrolysis on the structure and properties of coal and petroleum coke

Thermogravimetric Investigation on the Effect of Reaction Temperature and Blend Ratio on Co-Gasification Characteristics of Pyrolytic Oil Distillation Residue with Biochar

Thermogravimetric, thermochemical, and infrared spectral characterization of feedstocks and biochar derived at different pyrolysis temperatures

Effect of Pyrolysis Temperature on the Carbon Sequestration Capacity of Spent Mushroom Substrate Biochar in the Presence of Mineral Iron

Effects of Feedstock Type, Production Method, and Pyrolysis Temperature on Biochar and Hydrochar Properties

Co-combustion kinetic analysis of biomass hydrochar and anthracite in blast furnace injection

Effects of pyrolysis parameters on physicochemical properties of biochar and bio-oil and application in asphalt

Effect of pyrolysis temperature on composition, carbon fraction and abiotic stability of straw biochars: correlation and quantitative analysis

Role of biochar-based catalysts in microwave-induced biomass pyrolysis: Structural properties and modification with Fe-series metals