Abstract:Prefabricated construction technology has the advantages of high quality, high efficiency, low cost, energy saving and environmental protection, and has developed rapidly in China in recent years. Based on the design and construction concept of “equivalent to cast-in-site”, the seismic effect and strong earthquake damage mechanism of the overall structure considering boundary constraints are studied. In order to promote the application and development of high-assembly-rate concrete shear wall structures in high-intensity areas, a reduced-scale structural model of sleeve connection was designed and fabricated based on the Chinese seismic code. Through the multi-level strength-increasing shaking table simulation test, the dynamic characteristics, earthquake response, failure process and strong earthquake disaster mechanism of the model structure are comprehensively analyzed. The research results show that the prefabricated concrete shear wall structure can achieve the predetermined seismic fortification purpose according to the specified construction requirements. Secondly, Under the stepwise excitations of PGA 0.035–0.40 g, the flexural and shear failure of the coupling beam are the main failure mode, and the damage of the coupling beam with a small span-height ratio (1.33) is more serious. Furthermore, Under the stepwise excitations of PGA 0.62–0.90 g, the seismic capacity of the model structure is greatly reduced and there is a risk of collapse. The failure modes of the structure after a strong earthquake include four types: bending-shear composite failure of composite beams, horizontal interface penetration between composite beams and floor slabs, horizontal interface penetration between prefabricated walls and floor slabs, and vertical cracking at the junction surface of prefabricated walls and cast-in-site restraint elements. The latter three are unique forms of fabricated concrete shear wall structures. Finally, according to the whole process data of the test, the bottom shear force and top displacement of the model structure are calculated, and the hysteresis curve, skeleton curve and equivalent lateral stiffness are established. It is hoped that this study can provide a reference for the seismic design of high-rise fabricated concrete shear wall structures.

Shaking-table tests of seismic responses of slender intake tower-hoist chamber systems

Shaking table tests of a 1 ∶ 15 reinforced concrete containment vessel model for a nuclear power plant

Shaking Table Test on Structural Model of a Large Ship Lift Tower

Shaking Table Tests And Numerical Simulation Analysis Of A 1:15 Scale Model Reinforced Concrete Containment Vessel

Shaking table test on shaft-tunnel junction in liquefiable sand site

Shaking table test of fabricated concrete shear wall structure and study on damage mechanism of strong earthquake

Shaking Table Tests of a Reinforced Concrete Frame Subjected to Mainshock-Aftershock Sequences

Shake Table Test of Soil-Pile Groups-Bridge Structure Interaction in Liquefiable Ground

An Investigation into the Effect of Near-Fault Ground Motion Duration Parameters on the Nonlinear Seismic Response of Intake Towers

Shaking Table Test on the Seismic Response of a Frame-Type Subway Station in Composite Soil

Shaking table test on shaft ingate of shield tunnel

Dynamic Response of Shallow-Buried Small Spacing Tunnel with Asymmetrical Pressure: Shaking Table Testing and Numerical Simulation

Shaking Table Test on the Seismic Failure Characteristics of a Subway Station Structure on Liquefiable Ground

Analysis for tower-guide-chamber-fluid coupling system of shiplift under longitudinal earthquake

Shaking table test study of a surface frame structure–sand–tunnel system

Centrifuge Shaking Table Tests on Precast Underground Structure–Superstructure System in Liquefiable Ground

Shake table test and seismic fragility analysis of transmission tower-line system considering duration effect

Shaking table test and numerical analyses of a multi‐story traditional tower‐style building

Seismic Damage of Submerged Intake Tower under the Sequence of Mainshocks and Aftershocks

Dynamic Failure Experimental Study of a Gravity Dam Model on a Shaking Table and Analysis of Its Structural Dynamic Characteristics

Shaking Table Tests on the Seismic Response of Symmetrically Integrated Underground Stations