Abstract:Tandem solar cells are one of the fastest‐growing PV technology, since, it efficiently overcomes the thermalization and non‐absorption losses. However, appropriate absorber materials with suitable bandgaps are required to design an efficient tandem solar cell. In this context, the present research paper brings forth the results of simulation‐based studies carried out on thin‐film/CQD based 2‐T monolithic tandem solar cell that can be processed easily at a reduced cost. The device has been designed using a‐Si: H of wide bandgap (1.7eV) as top cell and PbS CQD of narrow bandgap (1.2eV) as the bottom cell. The feasibility of the proposed design is investigated in two steps. Initially, top and bottom subcell are designed and calibrated to have state of the art conversion efficiency of 6.86% and 9.38%, respectively in accordance with the previous literature. Afterwards, the bottom cell is inverted to get the desired direction of electron flow in accordance with the top cell. The thickness of the inverted bottom cell has been optimized as 200 nm so as to obtain 8.34% efficiency. Standalone condition reflected JSC and VOC of 9.97 mA.cm−2 and 0.91 V in top cell, and 21.28 mA.cm−2 and 0.63 V in the bottom cell. Further, both the top and bottom subcells are evaluated for tandem configuration with the help of ITO based interlayer to provide the current matching conditions. In the proposed tandem design, the thickness of the absorber layers is optimized to achieve the highest JSC, which is indeed limited by the top cell owing to lower JSC value of 10.61 mA.cm−2 in standalone condition. Optimized tandem design with 200 nm/150 nm thick absorber layer based top/bottom subcell resulted in JSC of 10.52 mA.cm−2, VOC of 1.59 V, FF of 71.65% and PCE of 12.02%.This article is protected by copyright. All rights reserved.

New design and optimization of half-tandem quantum dot solar cell: Over 30% power conversion efficiency using nanostructure oriented core-shell

Perovskite/Colloidal Quantum Dot Tandem Solar Cells: Theoretical Modeling and Monolithic Structure

Performance enhancement of PbS‐TBAI quantum dot solar cell with MoTe2 as hole transport layer

Ambient Stable and Efficient Monolithic Tandem Perovskite/PbS Quantum Dots Solar Cells via Surface Passivation and Light Management Strategies

Dual-interface modification effect of Carbon Quantum Dots on the performance of Polymer Solar Cells

Study on the influence of embedded structure of carbon quantum dots of the organic solar cells with the territory active layer structure of P3HT: PC 61 BM: CQDs

Strategy for Performance Enhancement of Cd1-XZnXTe/CdS Core/shell Quantum Dot Sensitized Solar Cells Through Band Adjustment

A Small‐Molecule “charge Driver” Enables Perovskite Quantum Dot Solar Cells with Efficiency Approaching 13%

Design and Simulation of a‐Si:H/PbS Colloidal Quantum Dots Monolithic Tandem Solar Cell for 12% Efficiency

Optimization of Perovskite/Colloidal Quantum Dot Monolithic Tandem Solar Cell to Enhance Device Performance via Solar Cell Capacitance Simulator 1D

Over 15% Efficiency PbS Quantum‐Dot Solar Cells by Synergistic Effects of Three Interface Engineering: Reducing Nonradiative Recombination and Balancing Charge Carrier Extraction

Proposal and Design of Organic/CIGS Tandem Solar Cell: Unveiling Optoelectronic Approaches for Enhanced Photovoltaic Performance

Improved Performance of Silicon Nanowire/cadmium Telluride Quantum Dots/organic Hybrid Solar Cells

Improving Organic Photovoltaic Efficiency via Heterophase Homojunction Copper Indium Sulfide Nanocrystals

Dual Interfacial Modification Engineering with 2D MXene Quantum Dots and Copper Sulphide Nanocrystals Enabled High‐Performance Perovskite Solar Cells

Simulating High‐Efficiency, Lead‐Free Inorganic‐Organic Perovskite Tandem Solar Cells with over 46% Efficiency

Enhancing solar cell efficiency: Investigation of high-performance lead-based perovskite-on-silicon (PVK–Si) tandem solar cells through design and numerical analysis

Over 15% Efficiency PbS Quantum‐Dot Solar Cells by Synergistic Effects of Three Interface Engineering: Reducing Nonradiative Recombination and Balancing Charge Carrier Extraction (adv. Energy Mater. 35/2022)

High-Performance Electron-Transport-Layer-Free Quantum Junction Solar Cells with Improved Efficiency Exceeding 10%

Regulating the Quantum Dots Integration to Improve the Performance of Tin–Lead Perovskite Solar Cells

Stable and Highly Efficient PbS Quantum Dot Tandem Solar Cells Employing a Rationally Designed Recombination Layer