Abstract:Experiments are performed to investigate the propagating characteristics of rotating detonation fueled by hydrogen in disk-shaped combustors with different configurations. Three combustor configurations are employed in the experiments, and the channel convergence ratio is ranged from 1.0 to 2.61. The mass flow rate varies from 50 to 450 g/s, and the equivalence ratio is ranged from 0.4 to 2.75. The operation maps including single-wave, symmetric dual-wave, asymmetric dual-wave and triple-wave rotating detonation mode are plotted in this study. The results indicate that the propagation process of rotating detonation wave is more stable when the combustor channel area remains constant. Engine exit convergence is beneficial to increase the intensity of rotating detonation wave and detonation-wave parameters, but “two-plane wall” engine with excessive radial-part convergence ratio would reduce the detonation combustion efficiency, thereby reducing the detonation-wave parameters. Additionally, adding exit convergence or increasing the radial-part convergence makes the wave structure in the rotating detonation combustor more complex. The wave-head number in the combustor increases with an increase in the mass flow rate. At some special conditions, the asymmetric dual-wave mode and triple-wave mode are obtained in the combustor with large radial-part convergence ratio or adding exit convergence. For one propagation mode, its operating scope under the three configurations partially coincides, but the upper and lower limits of equivalence ratio and the operating scope of mass flow rate are greatly affected by the combustor configuration. Adding exit convergence can reduce the critical mass flow rate of modes switching, and broaden the stable operation range of the engine, but the “two-plane wall” engine with excessive radial-part convergence ratio could reduce the operating stability and its operating range.

Propagation and flow field analysis of wall-detached continuous rotating detonation wave in a hollow combustor

Propagation of rotating detonation wave with wall-detached injection in a hollow combustor

Analysis on the radial structure of rotating detonation wave in a hollow combustor

Hydrogen-air, ethylene-air, and methane-air continuous rotating detonation in the hollow chamber

Initiation process of non-premixed continuous rotating detonation wave through Schlieren visualization

Effects of Inner Cone Length on Continuous Rotating Detonation in a Variable Cross-section Combustor

Propagation behavior of rotating detonation waves with premixed kerosene/air mixtures

Visual experimental research on the propagation instabilities in a plane-radial rotating detonation engine

Three-dimensional simulations of detonation propagation in circular tubes: Effects of jet initiation and wall reflection

Research on the Influence of Reflected Shock Wave on Continuously Rotating Detonation Engine

Investigating the flow characteristics and thermodynamic performance of curved detonation waves

Experimental investigation on air-breathing continuous rotating detonation engine in the cavity-based combustor

The nature of sawtooth wave and its distinction from continuous rotating detonation wave

Characterization of wave modes in a kerosene-fueled rotating detonation combustor with varied injection area ratios

Effects of Thermal Wall Conditions on Rotating Detonation

The Behavior of the Propagating Velocity of Rotating Detonation Waves and Counter-Rotating Shock Waves in a Hollow Combustor

Enhancement of ethylene-air continuous rotating detonation in the cavity-based annular combustor

Propagation characteristics of hydrogen-air rotating detonation wave in disk-shaped combustors with different configurations

Numerical investigation on the rotating detonation critical mode for a methane–air mixture in an annular tube using reactive Navier–Stokes equations

Numerical Study of the Reverse-Rotating Waves in Rotating Detonation Engine with a Hollow Combustor

Experimental Study on the Propagation Characteristics of Rotating Detonation Wave with Liquid Hydrocarbon/High-Enthalpy Air Mixture