Abstract:The paper discusses the results of molecular dynamic simulation of a melt of the multicomponent oxide-fluoride system CaO – SiO2 – – Al2O3 – MgO – Na2O – K2O – CaF2 – FeO, corresponding to composition of industrial slag-forming mixture (SFM) used in steel casting for slag targeting in the mold of a continuous casting machine (in wt %: 35.35 % SiO2 , 30.79 % CaO, 8.58 % Al2O3 , 1.26 % MgO, 13.73 % CaF2 , 7.57 % Na2O, 0.88 % K2O, and 1.82 % FeO). These concentrations were converted to mole fractions, and the number of ions was calculated for each of the components in the model. An eightcomponent oxide-fluoride melt containing 2003 ions in the main cube with a side length of 31.01 Å was simulated under periodic boundary conditions at an experimentally determined solidification onset temperature of 1257 K at constant volume. Coulomb interaction was taken into account by the Ewald–Hansen method. The time step was 0.05t0, where t0 = 7,608·10–14 s is the internal unit of time. The melt density was taken to be 3.04 g/cm3 based on our experimental data. The interparticle interaction potentials were chosen in the Born–Mayer form. Based on the simulation results, the structure of subcrystalline groups of atoms present in the melt at the temperature of solidification onset was determined. A discussion of the simulation results and their comparison with the literature data was held. It is shown that the computer model allows one to obtain a fairly realistic picture of atomic structure of the slag melt, indicating that the main structural component of all silicate systems is silicon-oxygen tetrahedron. Tetrahedra in silicates are either in the form of structural units isolated from each other, or, connecting together through peaks, they form complex anions. It is consistent with the theory of slag melts. Molecular-dynamic simulation allows one to obtain adequate information on structure of the melt of a certain chemical composition.

Simulation and property prediction of MgO-FeO-MnO solid solution in steel slag

Effect of Al2O3 on the Molten Slag Microstructure Information by Molecular Dynamics Simulation and Experimental Analysis

Effect of W(mgo)/w(al2o3) Ratio and Basicity on Microstructure and Metallurgical Properties of Blast Furnace Slag

Corrosion of MgO-C with Magnesium Aluminate Spinel Addition in A Steel Casting Simulator

Evaluating the Effect of MgO/Al2O3 Ratio on Thermal Behaviors and Structures of Blast Furnace Slag with Low Carbon Consumption

Corrosion mechanism of reactive MgO‐bonded Cr2O3‐bearing castables in CaO–Al2O3–Fe2O3–SiO2‐based steel‐making slag

Polymeric Structure Evolution Behavior Analysis of Aluminosilicate-Based Smelting Slag

Micro insight into foaming behavior of CaO–SiO2–Fe O–MgO-based slag induced by slag/metal reaction

Study on the structural properties of refining slags by molecular dynamics with deep learning potential

MOLECULAR DYNAMIC SIMULATION OF THE MELT OF OXIDE-FLUORIDE INDUSTRIAL SLAG-FORMING MIXTURE

Softening–Melting Behaviors of a MgO-SiO2-FeO Slag System on a Coke Bed

Stabilization of Mn4+ in synthetic slags and identification of important slag forming phases

Simulation research on oxygen mass transfer between steel and slag in IF steel refining process

Effect of unmelted lime on the element distribution behavior on a CaO-SiO2-MgO-Al2O3-FeO-CaF2(-Cr2O3) slag

Dissolution behavior of spent MgO–C refractory in the CaO–SiO2–FeO slag system as a steelmaking flux

Hydration properties of basic oxygen furnace steel slag

Structural Characteristics of CaO-SiO2-Al2O3-FeO Slag with Various FeO Contents Based on Molecular Dynamics Simulations

Structural and Viscous Insight into Impact of MoO3 on Molten Slags

Thermodynamic Analysis of Mineral Phase Composition of Steel Slag System

Assessing Magnesia Effect on Preparing Refractory Materials from Ferrochromium Slag